Updated icon url (#855 )

Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>
Updated icon url (#856 )
2021-05-02 16:48:33 +02:00 · 2021-05-02 16:47:31 +02:00 · 2021-05-02 16:46:46 +02:00 · 2021-05-02 16:46:08 +02:00 · 2021-05-02 16:45:15 +02:00 · 2021-05-02 16:44:19 +02:00
69 changed files with 830 additions and 512 deletions
--- a/.github/workflows/charts-lint-test.yaml
+++ b/.github/workflows/charts-lint-test.yaml
@@ -82,86 +82,10 @@ jobs:
          echo "::set-output name=detected::true"
        fi

-  check_version:
-    needs:
-    - changes-lint
-    if: |
-      !contains(github.event.head_commit.message, '[ci-skip]') &&
-      needs.changes-lint.outputs.detected == 'true'
-    name: Check chart version numbers
-    strategy:
-      matrix: ${{ fromJson(needs.changes-lint.outputs.matrix) }}
-      fail-fast: true
-      max-parallel: 15
-    runs-on: ubuntu-20.04
-    steps:
-    - name: Checkout
-      uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-
-    - name: Get version
-      id: version-get
-      run: |
-        shopt -s extglob
-        OUTPUT=$(helm inspect chart ${{ matrix.chart }} | grep "^version:")
-        VERSION=${OUTPUT#"version:"}
-        echo "::set-output name=version::${VERSION##*( )}"
-        shopt -u extglob
-
-    - name: Parse version
-      id: version-parse
-      uses: apexskier/github-semver-parse@v1
-      with:
-        version: ${{ steps.version-get.outputs.version }}
-
-    - name: Check version
-      id: version-check
-      run: |
-        if [[ ${{ matrix.chart }} =~ ^charts\/(.*)\/.* ]]; then
-          TYPE="${BASH_REMATCH[1]}"  
-          case $TYPE in
-            stable)
-              if [[ ${{ steps.version-parse.outputs.major }} -lt 1 ]]; then
-                echo "::error file=${{ matrix.chart }}::Chart version for \"$TYPE\" charts must be >= 1.0.0"
-                exit 1
-              fi
-            ;;
-
-            incubator)
-              if [[ ${{ steps.version-parse.outputs.major }} -gt 0 ]]; then
-                echo "::error file=${{ matrix.chart }}::Chart version for \"$TYPE\" charts must be < 1.0.0"
-                exit 1
-              fi
-            ;;
-
-            *)
-              echo "::error file=${{ matrix.chart }}::Unhandled chart type: $TYPE"
-              exit 1
-          esac
-        fi
-
-  # Summarize matrix https://github.community/t/status-check-for-a-matrix-jobs/127354/7
-  check_version_success:
-    needs: 
-    - changes-lint
-    - check_version
-    if: ${{ always() }}
-    name: Version check successful
-    runs-on: ubuntu-20.04
-    steps:
-    - name: Check Version matrix status
-      if: ${{ !contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-lint.outputs.detected == 'true' && needs.check_version.result != 'success' }}
-      run: |
-        exit 1
-
  lint:
    needs:
    - changes-lint
-    if: |
-      !contains(github.event.head_commit.message, '[ci-skip]')
-      &&
-      needs.changes-lint.outputs.detected == 'true'
+    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-lint.outputs.detected == 'true'"
    name: Lint charts
    runs-on: ubuntu-20.04
    steps:
@@ -186,24 +110,10 @@ jobs:
      id: lint
      run: ct lint --config .github/ct-lint.yaml

-  # Summarize matrix https://github.community/t/status-check-for-a-matrix-jobs/127354/7
-  lint_success:
-    needs: 
-    - changes-lint
-    - lint
-    if: ${{ always() }}
-    name: Lint successful
-    runs-on: ubuntu-20.04
-    steps:
-    - name: Check lint matrix status
-      if: ${{ !contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-lint.outputs.detected == 'true' && needs.lint.result != 'success' }}
-      run: exit 1
-
  unittest:
-    needs: 
-    - lint_success
-    if: |
-      !contains(github.event.head_commit.message, '[ci-skip]')
+    needs:
+    - lint
+    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
    name: Run unit tests
    runs-on: ubuntu-20.04
    steps:
@@ -238,12 +148,8 @@ jobs:
  install:
    needs:
    - changes-install
-    - check_version_success
-    - lint_success
-    if: |
-      !contains(github.event.head_commit.message, '[ci-skip]')
-      &&
-      needs.changes-install.outputs.detected == 'true'
+    - lint
+    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-install.outputs.detected == 'true'"
    name: Install charts
    strategy:
      matrix: ${{ fromJson(needs.changes-install.outputs.matrix) }}
@@ -282,7 +188,7 @@ jobs:

  # Summarize matrix https://github.community/t/status-check-for-a-matrix-jobs/127354/7
  install_success:
-    needs: 
+    needs:
    - changes-install
    - install
    if: ${{ always() }}
--- a/.github/workflows/charts-release.yaml
+++ b/.github/workflows/charts-release.yaml
@@ -1,5 +1,7 @@
 name: "Charts: Release"

+concurrency: helm-release
+
 on:
  workflow_dispatch:
  push:
@@ -13,30 +15,10 @@ on:
    - '!charts/**/README_CONFIG.md.gotmpl'

 jobs:
-  pre-release:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
-    runs-on: ubuntu-20.04
-    timeout-minutes: 5
-    steps:
-    - name: Block concurrent jobs
-      uses: softprops/turnstyle@v1
-      with:
-        continue-after-seconds: 180
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
  release:
    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
-    needs: pre-release
    runs-on: ubuntu-20.04
    steps:
-    - name: Block concurrent jobs
-      uses: softprops/turnstyle@v1
-      with:
-        continue-after-seconds: 180
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
    - name: Checkout
      uses: actions/checkout@v2
      with:
--- a/.github/workflows/pre-commit-check.yaml
+++ b/.github/workflows/pre-commit-check.yaml
@@ -0,0 +1,38 @@
+name: "Pre-commit consistency check"
+
+on:
+  workflow_dispatch:
+  pull_request:
+
+jobs:
+  pre-commit-check:
+    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
+    name: Run pre-commit checks
+    runs-on: ubuntu-20.04
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+
+    - uses: dorny/paths-filter@v2
+      id: filter
+      with:
+        list-files: shell
+        filters: |
+          addedOrModified:
+            - added|modified: '**'
+
+    # run only if changed files were detected
+    - name: Run against changes
+      uses: pre-commit/action@v2.0.3
+      if: steps.filter.outputs.addedOrModified == 'true'
+      with:
+        extra_args: --files ${{ steps.filter.outputs.addedOrModified_files }}
+
+    # run if no changed files were detected (e.g. workflow_dispatch on master branch)
+    - name: Run against all files
+      uses: pre-commit/action@v2.0.3
+      if: steps.filter.outputs.addedOrModified != 'true'
+      with:
+        extra_args: --all-files
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -7,15 +7,11 @@ repos:
  - id: end-of-file-fixer
  - id: fix-byte-order-marker
  - id: mixed-line-ending
+  - id: check-merge-conflict
+  - id: check-case-conflict

- repo: local
+- repo: https://github.com/Lucas-C/pre-commit-hooks
+  rev: v1.1.10
  hooks:
-  - id: ct-lint
-    name: "Chart Test: Lint"
-    language: docker_image
-    pass_filenames: false
-    types: ['file']
-    files: '^charts/.*(\.ya?ml|\.tpl|\.helmignore|NOTES.txt)'
-    entry: -u 0 quay.io/helmpack/chart-testing:v3.0.0 ct
-    args:
-    - lint
+  - id: remove-crlf
+  - id: remove-tabs
--- a/2
+++ b/2
@@ -7,6 +7,6 @@ group :test do
  gem 'minitest', "5.14.4"
  gem 'minitest-implicit-subject'
  gem 'minitest-reporters', "1.4.3"
-  gem 'pry', "0.14.0"
+  gem 'pry', "0.14.1"
  gem 'ruby-jq'
 end
--- a/charts/stable/alertmanager-bot/Chart.yaml
+++ b/charts/stable/alertmanager-bot/Chart.yaml
@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.4.2
 description: Bot for Prometheus Alertmanager
 name: alertmanager-bot
-version: 4.3.1
+version: 4.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - alertmanager
@@ -10,6 +10,7 @@ keywords:
 - bot
 - alerting
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/alertmanager-bot
+icon: https://raw.githubusercontent.com/prometheus/prometheus.github.io/master/assets/prometheus_logo-cb55bb5c346.png
 sources:
 - https://hub.docker.com/r/metalmatze/alertmanager-bot
 - https://github.com/metalmatze/alertmanager-bot
--- a/charts/stable/alertmanager-bot/README.md
+++ b/charts/stable/alertmanager-bot/README.md
@@ -1,6 +1,6 @@
 # alertmanager-bot

-![Version: 4.2.0](https://img.shields.io/badge/Version-4.2.0-informational?style=flat-square) ![AppVersion: 0.4.2](https://img.shields.io/badge/AppVersion-0.4.2-informational?style=flat-square)
+![Version: 4.3.2](https://img.shields.io/badge/Version-4.3.2-informational?style=flat-square) ![AppVersion: 0.4.2](https://img.shields.io/badge/AppVersion-0.4.2-informational?style=flat-square)

 Bot for Prometheus Alertmanager

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -96,6 +96,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -110,6 +124,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -120,4 +135,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/alertmanager-bot/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/alertmanager-bot/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/focalboard/Chart.yaml
+++ b/charts/stable/focalboard/Chart.yaml
@@ -2,14 +2,14 @@ apiVersion: v2
 appVersion: 0.6.5
 description: Focalboard is an open source, self-hosted alternative to Trello, Notion, and Asana.
 name: focalboard
-version: 1.0.1
+version: 1.0.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - focalboard
 - kanban
 - project management
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/focalboard
-icon: https://www.focalboard.com/img/logo.svg
+icon: https://github.com/mattermost/focalboard/raw/main/webapp/static/favicon.svg
 sources:
 - https://www.focalboard.com/
 - https://github.com/mattermost/focalboard
--- a/charts/stable/focalboard/README.md
+++ b/charts/stable/focalboard/README.md
@@ -1,6 +1,6 @@
 # focalboard

-![Version: 1.0.1](https://img.shields.io/badge/Version-1.0.1-informational?style=flat-square) ![AppVersion: 0.6.5](https://img.shields.io/badge/AppVersion-0.6.5-informational?style=flat-square)
+![Version: 1.0.2](https://img.shields.io/badge/Version-1.0.2-informational?style=flat-square) ![AppVersion: 0.6.5](https://img.shields.io/badge/AppVersion-0.6.5-informational?style=flat-square)

 Focalboard is an open source, self-hosted alternative to Trello, Notion, and Asana.

@@ -94,6 +94,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.0.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.1]

 #### Added
@@ -122,6 +136,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.0.2]: #1.0.2
+[1.0.1]: #1.0.1
 [1.0.0]: #1.0.0

 ## Support
@@ -132,4 +148,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/focalboard/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/focalboard/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.0.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.1]

 #### Added
@@ -37,5 +51,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.0.2]: #1.0.2
+[1.0.1]: #1.0.1
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/freshrss/Chart.yaml
+++ b/charts/stable/freshrss/Chart.yaml
@@ -2,13 +2,13 @@ apiVersion: v2
 appVersion: 1.17.0
 description: FreshRSS is a self-hosted RSS feed aggregator
 name: freshrss
-version: 4.3.1
+version: 4.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - freshrss
 - rss
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/freshrss
-icon: https://github.com/FreshRSS/FreshRSS/blob/master/docs/img/FreshRSS-logo.png?raw=true
+icon: https://avatars.githubusercontent.com/u/9414285?s=200&v=4
 sources:
 - https://github.com/FreshRSS/FreshRSS
 - https://hub.docker.com/r/linuxserver/freshrss
--- a/charts/stable/freshrss/README.md
+++ b/charts/stable/freshrss/README.md
@@ -1,6 +1,6 @@
 # freshrss

-![Version: 4.2.0](https://img.shields.io/badge/Version-4.2.0-informational?style=flat-square) ![AppVersion: 1.17.0](https://img.shields.io/badge/AppVersion-1.17.0-informational?style=flat-square)
+![Version: 4.3.2](https://img.shields.io/badge/Version-4.3.2-informational?style=flat-square) ![AppVersion: 1.17.0](https://img.shields.io/badge/AppVersion-1.17.0-informational?style=flat-square)

 FreshRSS is a self-hosted RSS feed aggregator

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -92,6 +92,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -106,6 +120,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -116,4 +131,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/freshrss/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/freshrss/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/haste-server/Chart.yaml
+++ b/charts/stable/haste-server/Chart.yaml
@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: Simple text sharing
 name: haste-server
-version: 1.0.1
+version: 1.0.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - haste
@@ -10,7 +10,7 @@ keywords:
 - haste-server
 - pastebin
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/haste
-icon: https://github.com/seejohnrun/haste-server/blob/master/static/logo.png
+icon: https://raw.githubusercontent.com/nicholaswilde/helm-charts/main/images/haste.png
 sources:
 - https://github.com/seejohnrun/haste-server
 - https://github.com/k8s-at-home/container-images
--- a/charts/stable/haste-server/README.md
+++ b/charts/stable/haste-server/README.md
@@ -1,6 +1,6 @@
 # haste-server

-![Version: 1.0.1](https://img.shields.io/badge/Version-1.0.1-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
+![Version: 1.0.2](https://img.shields.io/badge/Version-1.0.2-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)

 Simple text sharing

@@ -92,6 +92,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.0.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated broken icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -106,6 +120,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.0.2]: #1.0.2
 [1.0.0]: #1.0.0

 ## Support
--- a/charts/stable/haste-server/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/haste-server/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.0.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated broken icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.0.2]: #1.0.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/jellyfin/Chart.yaml
+++ b/charts/stable/jellyfin/Chart.yaml
@@ -2,14 +2,14 @@ apiVersion: v2
 appVersion: 10.7.0
 description: Jellyfin is a Free Software Media System
 name: jellyfin
-version: 7.3.1
+version: 7.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - jellyfin
 - plex
 - emby
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/Jellyfin
-icon: https://github.com/jellyfin/jellyfin-ux/blob/master/branding/SVG/icon-solid-black.svg
+icon: https://raw.githubusercontent.com/jellyfin/jellyfin-ux/master/branding/SVG/icon-solid-black.svg
 sources:
 - https://hub.docker.com/r/jellyfin/jellyfin
 - https://github.com/jellyfin/jellyfin
--- a/charts/stable/jellyfin/README.md
+++ b/charts/stable/jellyfin/README.md
@@ -1,6 +1,6 @@
 # jellyfin

-![Version: 7.2.0](https://img.shields.io/badge/Version-7.2.0-informational?style=flat-square) ![AppVersion: 10.7.0](https://img.shields.io/badge/AppVersion-10.7.0-informational?style=flat-square)
+![Version: 7.3.2](https://img.shields.io/badge/Version-7.3.2-informational?style=flat-square) ![AppVersion: 10.7.0](https://img.shields.io/badge/AppVersion-10.7.0-informational?style=flat-square)

 Jellyfin is a Free Software Media System

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -97,6 +97,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [7.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated broken icon url.
+
+#### Removed
+
+- N/A
+
 ### [6.0.0]

 #### Migration !breaking changes!
@@ -135,6 +149,9 @@ Drop browser cache and cookies for your jellyfin URL!

 - Replaced LinuxServer.io image with official

+[7.3.2]: #7.3.2
+[6.0.0]: #6.0.0
+
 ## Support

 - See the [Docs](https://docs.k8s-at-home.com/our-helm-charts/getting-started/)
@@ -143,4 +160,4 @@ Drop browser cache and cookies for your jellyfin URL!
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/jellyfin/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/jellyfin/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [7.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated broken icon url.
+
+#### Removed
+
+- N/A
+
 ### [6.0.0]

 #### Migration !breaking changes!
@@ -46,4 +60,7 @@ Drop browser cache and cookies for your jellyfin URL!
 #### Changed

 - Replaced LinuxServer.io image with official
+
+[7.3.2]: #7.3.2
+[6.0.0]: #6.0.0
 {{- end -}}
--- a/charts/stable/librespeed/Chart.yaml
+++ b/charts/stable/librespeed/Chart.yaml
@@ -2,13 +2,13 @@ apiVersion: v2
 appVersion: 5.2.4
 description: Librespeed is a HTML5 webpage to test upload and download speeds
 name: librespeed
-version: 3.1.1
+version: 3.1.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - librespeed
 - speedtest
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/librespeed
-icon: https://github.com/librespeed/speedtest/blob/master/.logo/logo3.png?raw=true
+icon: https://github.com/librespeed/speedtest/blob/master/.logo/icon_huge.png?raw=true
 sources:
 - https://github.com/librespeed/speedtest
 - https://hub.docker.com/r/linuxserver/librespeed
--- a/charts/stable/librespeed/README.md
+++ b/charts/stable/librespeed/README.md
@@ -1,6 +1,6 @@
 # librespeed

-![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 5.2.4](https://img.shields.io/badge/AppVersion-5.2.4-informational?style=flat-square)
+![Version: 3.1.2](https://img.shields.io/badge/Version-3.1.2-informational?style=flat-square) ![AppVersion: 5.2.4](https://img.shields.io/badge/AppVersion-5.2.4-informational?style=flat-square)

 Librespeed is a HTML5 webpage to test upload and download speeds

@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -93,6 +93,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [3.1.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Changed icon url.
+
+#### Removed
+
+- N/A
+
 ### [3.0.0]

 #### Changed
@@ -113,6 +127,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[3.1.2]: #3.1.2
 [3.0.0]: #3.0.0
 [1.0.0]: #1.0.0

@@ -124,4 +139,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/librespeed/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/librespeed/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [3.1.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Changed icon url.
+
+#### Removed
+
+- N/A
+
 ### [3.0.0]

 #### Changed
@@ -29,6 +43,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[3.1.2]: #3.1.2
 [3.0.0]: #3.0.0
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/lychee/Chart.yaml
+++ b/charts/stable/lychee/Chart.yaml
@@ -2,14 +2,14 @@ apiVersion: v2
 appVersion: 4.0.8
 description: Lychee is a free photo-management tool, which runs on your server or web-space
 name: lychee
-version: 4.3.1
+version: 4.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - lychee
 - photo
 - pictures
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/lychee
-icon: https://github.com/LycheeOrg/Lychee/blob/master/Banner.png?raw=true
+icon: https://avatars.githubusercontent.com/u/37916028?s=200&v=4
 sources:
 - https://github.com/LycheeOrg/Lychee
 - https://hub.docker.com/r/lycheeorg/lychee
--- a/charts/stable/lychee/README.md
+++ b/charts/stable/lychee/README.md
@@ -1,6 +1,6 @@
 # lychee

-![Version: 4.2.0](https://img.shields.io/badge/Version-4.2.0-informational?style=flat-square) ![AppVersion: 4.0.8](https://img.shields.io/badge/AppVersion-4.0.8-informational?style=flat-square)
+![Version: 4.3.2](https://img.shields.io/badge/Version-4.3.2-informational?style=flat-square) ![AppVersion: 4.0.8](https://img.shields.io/badge/AppVersion-4.0.8-informational?style=flat-square)

 Lychee is a free photo-management tool, which runs on your server or web-space

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -99,6 +99,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -113,6 +127,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -123,4 +138,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/lychee/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/lychee/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/mosquitto/Chart.yaml
+++ b/charts/stable/mosquitto/Chart.yaml
@@ -2,14 +2,14 @@ apiVersion: v2
 appVersion: 2.0.7
 description: Eclipse Mosquitto - An open source MQTT broker
 name: mosquitto
-version: 2.3.1
+version: 2.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - mosquitto
 - MQTT
 - eclipse-iot
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/mosquitto
-icon: https://mosquitto.org/images/mosquitto-text-side-28.png
+icon: https://raw.githubusercontent.com/eclipse/mosquitto/master/logo/mosquitto-logo-min.svg
 sources:
 - https://github.com/eclipse/mosquitto
 maintainers:
--- a/charts/stable/mosquitto/README.md
+++ b/charts/stable/mosquitto/README.md
@@ -1,6 +1,6 @@
 # mosquitto

-![Version: 2.2.0](https://img.shields.io/badge/Version-2.2.0-informational?style=flat-square) ![AppVersion: 2.0.7](https://img.shields.io/badge/AppVersion-2.0.7-informational?style=flat-square)
+![Version: 2.3.2](https://img.shields.io/badge/Version-2.3.2-informational?style=flat-square) ![AppVersion: 2.0.7](https://img.shields.io/badge/AppVersion-2.0.7-informational?style=flat-square)

 Eclipse Mosquitto - An open source MQTT broker

@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -101,6 +101,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.1.1]

 #### Added
@@ -115,6 +129,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.3.2]: #2.3.2
 [1.1.1]: #1.1.1

 ## Support
@@ -125,4 +140,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/mosquitto/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/mosquitto/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.1.1]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.3.2]: #2.3.2
 [1.1.1]: #1.1.1
 {{- end -}}
--- a/charts/stable/oauth2-proxy/Chart.yaml
+++ b/charts/stable/oauth2-proxy/Chart.yaml
@@ -1,9 +1,10 @@
 name: oauth2-proxy
-version: 5.0.3
+version: 5.0.4
 apiVersion: v1
 appVersion: 7.0.1
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/oauth2-proxy
 description: A reverse proxy that provides authentication with Google, Github or other providers
+icon: https://avatars.githubusercontent.com/u/62798169?s=200&v=4
 keywords:
 - kubernetes
 - oauth
--- a/charts/stable/oauth2-proxy/README.md
+++ b/charts/stable/oauth2-proxy/README.md
@@ -1,6 +1,6 @@
 # oauth2-proxy

-![Version: 5.0.3](https://img.shields.io/badge/Version-5.0.3-informational?style=flat-square) ![AppVersion: 7.0.1](https://img.shields.io/badge/AppVersion-7.0.1-informational?style=flat-square)
+![Version: 5.0.4](https://img.shields.io/badge/Version-5.0.4-informational?style=flat-square) ![AppVersion: 7.0.1](https://img.shields.io/badge/AppVersion-7.0.1-informational?style=flat-square)

 A reverse proxy that provides authentication with Google, Github or other providers

@@ -208,6 +208,21 @@ Due to [this issue](https://github.com/helm/helm/issues/6583) there may be error

 - N/A

+### [5.0.4]
+
+#### Added
+
+- Added icon url.
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
+[5.0.4]: #5.0.4
 [5.0.1]: #5.0.1

 ## Support
--- a/charts/stable/oauth2-proxy/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/oauth2-proxy/README_CHANGELOG.md.gotmpl
@@ -55,5 +55,20 @@ Due to [this issue](https://github.com/helm/helm/issues/6583) there may be error

 - N/A

+### [5.0.4]
+
+#### Added
+
+- Added icon url.
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
+[5.0.4]: #5.0.4
 [5.0.1]: #5.0.1
 {{- end -}}
--- a/charts/stable/paperless/Chart.yaml
+++ b/charts/stable/paperless/Chart.yaml
@@ -2,12 +2,12 @@ apiVersion: v2
 appVersion: 1.0.0
 description: Paperless - Index and archive all of your scanned paper documents
 name: paperless
-version: 5.3.1
+version: 5.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - paperless
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/paperless
-icon: https://raw.githubusercontent.com/the-paperless-project/paperless/master/src/paperless/static/paperless/img/logo-dark.png
+icon: https://avatars.githubusercontent.com/u/47271576?s=200&v=4
 sources:
 - https://github.com/jonaswinkler/paperless-ng
 maintainers:
--- a/charts/stable/paperless/README.md
+++ b/charts/stable/paperless/README.md
@@ -1,6 +1,6 @@
 # paperless

-![Version: 5.2.0](https://img.shields.io/badge/Version-5.2.0-informational?style=flat-square) ![AppVersion: 1.0.0](https://img.shields.io/badge/AppVersion-1.0.0-informational?style=flat-square)
+![Version: 5.3.2](https://img.shields.io/badge/Version-5.3.2-informational?style=flat-square) ![AppVersion: 1.0.0](https://img.shields.io/badge/AppVersion-1.0.0-informational?style=flat-square)

 Paperless - Index and archive all of your scanned paper documents

@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -106,6 +106,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [5.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -120,6 +134,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[5.3.2]: #5.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -130,4 +145,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/paperless/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/paperless/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [5.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[5.3.2]: #5.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/pyload/Chart.yaml
+++ b/charts/stable/pyload/Chart.yaml
@@ -2,13 +2,13 @@ apiVersion: v2
 appVersion: 0.4.20
 description: pyLoad is a Free and Open Source download manager written in Python and designed to be extremely lightweight, easily extensible and fully manageable via web.
 name: pyload
-version: 4.3.1
+version: 4.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - pyload
 - download
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/pyload
-icon: https://github.com/pyload/pyload/blob/main/media/logo.png?raw=true
+icon: https://raw.githubusercontent.com/pyload/pyload/main/media/logo.png
 sources:
 - https://github.com/pyload/pyload
 - https://hub.docker.com/r/linuxserver/pyload
--- a/charts/stable/pyload/README.md
+++ b/charts/stable/pyload/README.md
@@ -1,6 +1,6 @@
 # pyload

-![Version: 4.2.0](https://img.shields.io/badge/Version-4.2.0-informational?style=flat-square) ![AppVersion: 0.4.20](https://img.shields.io/badge/AppVersion-0.4.20-informational?style=flat-square)
+![Version: 4.3.2](https://img.shields.io/badge/Version-4.3.2-informational?style=flat-square) ![AppVersion: 0.4.20](https://img.shields.io/badge/AppVersion-0.4.20-informational?style=flat-square)

 pyLoad is a Free and Open Source download manager written in Python and designed to be extremely lightweight, easily extensible and fully manageable via web.

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -95,6 +95,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -109,6 +123,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -119,4 +134,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/pyload/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/pyload/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/sharry/Chart.yaml
+++ b/charts/stable/sharry/Chart.yaml
@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.6.0
 description: Sharry allows to share files with others in a simple way. It is a self-hosted web application. The basic concept is to upload files and get a url back that can then be shared.
 name: sharry
-version: 2.3.1
+version: 3.0.0
 keywords:
  - file sharing
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/sharry
--- a/charts/stable/sharry/README.md
+++ b/charts/stable/sharry/README.md
@@ -1,6 +1,6 @@
 # sharry

-![Version: 2.2.0](https://img.shields.io/badge/Version-2.2.0-informational?style=flat-square) ![AppVersion: 1.6.0](https://img.shields.io/badge/AppVersion-1.6.0-informational?style=flat-square)
+![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 1.6.0](https://img.shields.io/badge/AppVersion-1.6.0-informational?style=flat-square)

 Sharry allows to share files with others in a simple way. It is a self-hosted web application. The basic concept is to upload files and get a url back that can then be shared.

@@ -17,7 +17,7 @@ Sharry allows to share files with others in a simple way. It is a self-hosted we

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -74,33 +74,16 @@ N/A

 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| additionalVolumeMounts[0].mountPath | string | `"/opt/sharry.conf"` |  |
-| additionalVolumeMounts[0].name | string | `"sharry-config"` |  |
-| additionalVolumeMounts[0].subPath | string | `"sharry.conf"` |  |
-| additionalVolumes[0].configMap.name | string | `"sharry-config"` |  |
-| additionalVolumes[0].name | string | `"sharry-config"` |  |
-| affinity | object | `{}` | Affinity settings for pod assignment of the GUI |
 | args[0] | string | `"/opt/sharry.conf"` |  |
+| config | object | see URL to default config | Full list of options https://eikek.github.io/sharry/doc/configure |
 | image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"eikek0/sharry"` | sharry image |
-| image.tag | string | `"1.6.0"` | sharry image tag |
-| ingress.annotations."nginx.ingress.kubernetes.io/client-body-buffer-size" | string | `"2048m"` | Nginx client Body Buffer Size |
-| ingress.annotations."nginx.ingress.kubernetes.io/proxy-body-size" | string | `"2048m"` | Nginx Proxy Body Size |
+| image.repository | string | `"eikek0/sharry"` |  |
+| image.tag | string | `"1.6.0"` |  |
+| ingress.annotations."nginx.ingress.kubernetes.io/client-body-buffer-size" | string | `"2048m"` |  |
+| ingress.annotations."nginx.ingress.kubernetes.io/proxy-body-size" | string | `"2048m"` |  |
 | ingress.annotations."nginx.ingress.kubernetes.io/proxy-buffering" | string | `"off"` |  |
 | ingress.enabled | bool | `false` |  |
-| nodeSelector | object | `{}` | Node labels for pod assignment of the GUI |
-| podAnnotations | object | `{}` | Pod annotations |
-| resources | object | `{}` |  |
-| service.port.port | int | `9090` | Kubernetes port where the GUI is exposed |
-| sharry.baseUrl | string | `"http://localhost:9090"` | This is the base URL this application is deployed to. |
-| sharry.chunkSize | string | `"512K"` | When storing binary data use chunks of this size. |
-| sharry.jdbcPassword | string | `""` | jdbc Password |
-| sharry.jdbcUrl | string | `"jdbc:h2://\"${java.io.tmpdir}\"/sharry-demo.db;MODE=PostgreSQL;DATABASE_TO_LOWER=TRUE"` | By default a H2 file-based database is configured. You can provide a postgresql or mariadb connection here. |
-| sharry.jdbcUser | string | `"sa"` | jdbc Username |
-| sharry.maxSize | string | `"1.5G"` | Maximum size of a share. |
-| sharry.maxValidity | string | `"365 days"` | Maximum validity for uploads. |
-| sharry.signup | string | `"open"` | The mode defines if new users can signup or not. It can have three values : open, invite, closed |
-| tolerations | list | `[]` | Toleration labels for pod assignment of the GUI |
+| service.port.port | int | `9090` |  |

 ## Changelog

--- a/charts/stable/sharry/templates/common.yaml
+++ b/charts/stable/sharry/templates/common.yaml
@@ -1 +1,31 @@
+{{/* Make sure all variables are set properly */}}
+{{- include "common.values.setup" . }}
+
+{{/* Append the configMap to the additionalVolumes */}}
+{{- define "sharry.configmap.volume" -}}
+name: sharry-config
+configMap:
+  name: {{ template "common.names.fullname" . }}-config
+{{- end -}}
+
+{{- $volume := include "sharry.configmap.volume" . | fromYaml -}}
+{{- if $volume -}}
+    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
+    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
+{{- end -}}
+
+{{/* Append the configMap volume to the additionalVolumeMounts */}}
+{{- define "sharry.configmap.volumeMount" -}}
+name: sharry-config
+mountPath: /opt/sharry.conf
+subPath: sharry.conf
+{{- end -}}
+
+{{- $volumeMount := include "sharry.configmap.volumeMount" . | fromYaml -}}
+{{- if $volumeMount -}}
+    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
+    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
+{{- end -}}
+
+{{/* Render the templates */}}
 {{ include "common.all" . }}
--- a/charts/stable/sharry/templates/configmap.yaml
+++ b/charts/stable/sharry/templates/configmap.yaml
@@ -1,91 +1,9 @@
-
-{{/*
-Sharry Configuration files.
-*/}}
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: "sharry-config"
+  name: {{ template "common.names.fullname" . }}-config
  labels:
    {{- include "common.labels" . | nindent 4 }}
 data:
  sharry.conf: |
-    sharry.restserver {
-      
-      {{- if .Values.sharry.baseUrl }}
-      base-url = "{{ .Values.sharry.baseUrl }}"
-      {{ end }}
-      bind {
-        address = "0.0.0.0"
-        port = {{- if .Values.service.port.port }}{{ .Values.service.port.port }}{{ end }}
-      }
-
-      backend {
-        auth {
-          fixed.enabled = true ## enabled admin:admin access
-        }
-
-        jdbc {
-          url = "{{- if .Values.sharry.jdbcUrl }}{{ .Values.sharry.jdbcUrl }}{{ end }}"
-          user = "{{- if .Values.sharry.jdbcUser }}{{ .Values.sharry.jdbcUser }}{{ end }}"
-          password = "{{- if .Values.sharry.jdbcPassword }}{{ .Values.sharry.jdbcPassword }}{{ end }}"
-        }
-
-      webapp {
-        # This is shown in the top right corner of the web application
-        app-name = "Sharry"
-
-        # The icon next to the app-name. Needs to be an URL to a image.
-        app-icon = ""
-
-        # The login and register page displays a logo image, by default
-        # the Sharry logo. This can be changed here. It needs to be an URL
-        # to an image.
-        app-logo = ""
-
-        # This is markdown that is inserted as the footer on each page in
-        # the ui. If left empty, a link to the project is rendered.
-        app-footer = ""
-
-        # Whether to display the footer on each page in the ui. Set it to
-        # false to hide it.
-        app-footer-visible = true
-
-        # Chunk size used for one request. The server will re-chunk the
-        # stream into smaller chunks. But the client can transfer more in
-        # one requests, resulting in faster uploads.
-        #
-        # You might need to adjust this value depending on your setup. A
-        # higher value usually means faster uploads.
-        chunk-size = "100M"
-
-        # Number of milliseconds the client should wait before doing a new
-        # upload attempt after something failed. The length of the array
-        # denotes the number of retries.
-        retry-delays = [0, 3000, 6000, 12000, 24000, 48000]
-
-        # The login page can display a welcome message that is readable by
-        # everyone. The text is processed as markdown.
-        welcome-message = ""
-
-      }
-
-      share {
-            # When storing binary data use chunks of this size.
-            chunk-size = "{{- if .Values.sharry.chunkSize }}{{ .Values.sharry.chunkSize }}{{ end }}"
-      
-            # Maximum size of a share.
-            max-size = "{{- if .Values.sharry.maxSize }}{{ .Values.sharry.maxSize }}{{ end }}"
-      
-            # Maximum validity for uploads
-            max-validity = {{- if .Values.sharry.maxValidity }}{{ .Values.sharry.maxValidity }}{{ end }}
-          }
-      
-              signup {
-                mode = "{{- if .Values.sharry.signup }}{{ .Values.sharry.signup }}{{ end }}"
-                invite-time = "3 days"
-                invite-password = "generate-invite"
-              }
-            }
-      
-          }
+{{ .Values.config | indent 4 }}
--- a/charts/stable/sharry/values.yaml
+++ b/charts/stable/sharry/values.yaml
@@ -1,77 +1,46 @@
-# Default values for sharry.
-
+#
+## IMPORTANT NOTE
+##
+## This chart inherits from our common library chart. You can check the default values/options here:
+## https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml
+##
 image:
-  # -- sharry image
  repository: eikek0/sharry
-  # -- sharry image tag
  tag: 1.6.0
-  # sharry image pull policy
  pullPolicy: IfNotPresent

-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #  cpu: 100m
-  #  memory: 128Mi
-  # requests:
-  #  cpu: 100m
-  #  memory: 128Mi
-
 service:
  port:
-    # -- Kubernetes port where the GUI is exposed
    port: 9090

 args:
 - "/opt/sharry.conf"

-sharry:
-  # -- This is the base URL this application is deployed to.
-  baseUrl: "http://localhost:9090"
-  # -- By default a H2 file-based database is configured. You can provide a postgresql or mariadb connection here.
-  jdbcUrl: "jdbc:h2://\"${java.io.tmpdir}\"/sharry-demo.db;MODE=PostgreSQL;DATABASE_TO_LOWER=TRUE"
-  # -- jdbc Username
-  jdbcUser: sa
-  # -- jdbc Password
-  jdbcPassword: ""
-  # -- When storing binary data use chunks of this size.
-  chunkSize: "512K"
-  # -- Maximum size of a share.
-  maxSize: "1.5G"
-  # -- Maximum validity for uploads.
-  maxValidity: "365 days"
-  # -- The mode defines if new users can signup or not. It can have three values : open, invite, closed
-  signup: "open"
-
-# -- Node labels for pod assignment of the GUI
-nodeSelector: {}
-
-# -- Toleration labels for pod assignment of the GUI
-tolerations: []
-
-# -- Affinity settings for pod assignment of the GUI
-affinity: {}
-
-# -- Pod annotations
-podAnnotations: {}
-
-additionalVolumes:
- name: sharry-config
-  configMap:
-    name: sharry-config
-additionalVolumeMounts:
- name: sharry-config
-  mountPath: /opt/sharry.conf
-  subPath: sharry.conf
-
 ingress:
  enabled: false
-  annotations:
-    # -- Nginx client Body Buffer Size
-    nginx.ingress.kubernetes.io/client-body-buffer-size: "2048m"
-    # -- Nginx Proxy Body Size
-    nginx.ingress.kubernetes.io/proxy-body-size: "2048m"
-    nginx.ingress.kubernetes.io/proxy-buffering: "off"
+  # -- Enable large file support with those annotations for nginx
+  # annotations:
+  #   nginx.ingress.kubernetes.io/client-body-buffer-size: "2048m"
+  #   nginx.ingress.kubernetes.io/proxy-body-size: "2048m"
+  #   nginx.ingress.kubernetes.io/proxy-buffering: "off"
+
+    # -- Full list of options https://eikek.github.io/sharry/doc/configure
+# @default -- see URL to default config
+config: |
+  sharry.restserver {
+    # base-url = "https://sharry.${DOMAIN}"
+    bind {
+      address = "0.0.0.0"
+      port = 9090
+    }
+    backend {
+      auth {
+        fixed {
+          enabled = false  # set to true to enable this auth provider
+          user = "admin"
+          password = "admin"
+          order = 10
+        }
+      }
+    }
+  }
--- a/charts/stable/stash/Chart.yaml
+++ b/charts/stable/stash/Chart.yaml
@@ -2,11 +2,12 @@ apiVersion: v2
 appVersion: latest
 description: An organizer for your porn, written in Go
 name: stash
-version: 1.2.1
+version: 1.2.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - porn
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/stash
+icon: https://raw.githubusercontent.com/stashapp/website/master/images/stash.svg
 sources:
 - https://github.com/stashapp/stash
 - https://hub.docker.com/r/stashapp/stash
--- a/charts/stable/stash/README.md
+++ b/charts/stable/stash/README.md
@@ -1,6 +1,6 @@
 # stash

-![Version: 1.1.0](https://img.shields.io/badge/Version-1.1.0-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
+![Version: 1.2.2](https://img.shields.io/badge/Version-1.2.2-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)

 An organizer for your porn, written in Go

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -96,6 +96,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.2.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -110,6 +124,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.2.2]: #1.2.2
 [1.0.0]: #1.0.0

 ## Support
@@ -120,4 +135,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/stash/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/stash/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.2.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.2.2]: #1.2.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/statping/Chart.yaml
+++ b/charts/stable/statping/Chart.yaml
@@ -2,14 +2,14 @@ apiVersion: v2
 appVersion: v0.90.74
 description: Status page for monitoring your websites and applications
 name: statping
-version: 3.3.1
+version: 3.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - statping
 - status
 - status-page
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/statping
-icon: https://github.com/statping/statping/blob/dev/frontend/src/assets/logo.png?raw=true
+icon: https://avatars.githubusercontent.com/u/61949049?s=200&v=4
 sources:
 - https://github.com/statping/statping
 maintainers:
--- a/charts/stable/statping/README.md
+++ b/charts/stable/statping/README.md
@@ -1,6 +1,6 @@
 # statping

-![Version: 3.2.1](https://img.shields.io/badge/Version-3.2.1-informational?style=flat-square) ![AppVersion: v0.90.74](https://img.shields.io/badge/AppVersion-v0.90.74-informational?style=flat-square)
+![Version: 3.3.2](https://img.shields.io/badge/Version-3.3.2-informational?style=flat-square) ![AppVersion: v0.90.74](https://img.shields.io/badge/AppVersion-v0.90.74-informational?style=flat-square)

 Status page for monitoring your websites and applications

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 | Repository | Name | Version |
 |------------|------|---------|
 | https://charts.bitnami.com/bitnami | postgresql | 10.3.15 |
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -89,7 +89,7 @@ N/A
 | env.VIRTUAL_HOST | string | `""` | External URL you use to connect to the statping (the one you enter in your browser) |
 | image.pullPolicy | string | `"IfNotPresent"` |  |
 | image.repository | string | `"statping/statping"` |  |
-| image.tag | string | `v0.90.74` |  |
+| image.tag | string | `"v0.90.65"` |  |
 | ingress.enabled | bool | `false` |  |
 | persistence | object | see bellow | Generated application config.yaml and logs are written here. Usually does not need to be persisted. |
 | postgresql | object | see bellow | Bitnami postgres chart. For more options see https://github.com/bitnami/charts/tree/master/bitnami/postgresql |
@@ -107,6 +107,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [3.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [2.0.0]

 #### Added
@@ -122,6 +136,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[3.3.2]: #3.3.2
 [2.0.0]: #2.0.0

 ## Support
@@ -131,3 +146,5 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Ask a [question](https://github.com/k8s-at-home/organization/discussions)
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

+----------------------------------------------
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/statping/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/statping/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [3.3.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [2.0.0]

 #### Added
@@ -24,5 +38,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[3.3.2]: #3.3.2
 [2.0.0]: #2.0.0
 {{- end -}}
--- a/charts/stable/syncthing/Chart.yaml
+++ b/charts/stable/syncthing/Chart.yaml
@@ -2,13 +2,13 @@ apiVersion: v2
 appVersion: 1.15.1
 description: Open Source Continuous File Synchronization
 name: syncthing
-version: 1.1.1
+version: 1.1.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - syncthing
 - file sync
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/syncthing
-icon: https://syncthing.net/img/logo-horizontal.svg
+icon: https://github.com/syncthing/syncthing/raw/main/assets/logo-128.png
 sources:
 - https://syncthing.net/
 - https://github.com/syncthing/syncthing
--- a/charts/stable/syncthing/README.md
+++ b/charts/stable/syncthing/README.md
@@ -1,6 +1,6 @@
 # syncthing

-![Version: 1.0.0](https://img.shields.io/badge/Version-1.0.0-informational?style=flat-square) ![AppVersion: 1.15.1](https://img.shields.io/badge/AppVersion-1.15.1-informational?style=flat-square)
+![Version: 1.1.2](https://img.shields.io/badge/Version-1.1.2-informational?style=flat-square) ![AppVersion: 1.15.1](https://img.shields.io/badge/AppVersion-1.15.1-informational?style=flat-square)

 Open Source Continuous File Synchronization

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -108,6 +108,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.1.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -122,6 +136,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.1.2]: #1.1.2
 [1.0.0]: #1.0.0

 ## Support
@@ -132,4 +147,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/syncthing/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/syncthing/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [1.1.2]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url.
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[1.1.2]: #1.1.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/traccar/Chart.yaml
+++ b/charts/stable/traccar/Chart.yaml
@@ -2,12 +2,13 @@ apiVersion: v2
 appVersion: v4.11
 description: Traccar is an open source GPS tracking system.
 name: traccar
-version: 4.3.1
+version: 4.3.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - traccar
 - gps
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/traccar
+icon: "https://github.com/traccar/traccar-web/raw/master/web/icon.png"
 sources:
 - https://github.com/traccar/traccar
 - https://hub.docker.com/r/traccar/traccar
--- a/charts/stable/traccar/README.md
+++ b/charts/stable/traccar/README.md
@@ -1,6 +1,6 @@
 # traccar

-![Version: 4.2.0](https://img.shields.io/badge/Version-4.2.0-informational?style=flat-square) ![AppVersion: v4.11](https://img.shields.io/badge/AppVersion-v4.11-informational?style=flat-square)
+![Version: 4.3.2](https://img.shields.io/badge/Version-4.3.2-informational?style=flat-square) ![AppVersion: v4.11](https://img.shields.io/badge/AppVersion-v4.11-informational?style=flat-square)

 Traccar is an open source GPS tracking system.

@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`
 | Repository | Name | Version |
 |------------|------|---------|
 | https://charts.bitnami.com/bitnami | mariadb | 9.3.6 |
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -102,6 +102,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -116,6 +130,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0

 ## Support
@@ -126,4 +141,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/traccar/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/traccar/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [4.3.2]
+
+#### Added
+
+- Added icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[4.3.2]: #4.3.2
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/transmission/Chart.yaml
+++ b/charts/stable/transmission/Chart.yaml
@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v3.00
 description: Transmission is a cross-platform BitTorrent client
 name: transmission
-version: 5.0.0
+version: 6.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - transmission
--- a/charts/stable/transmission/README.md
+++ b/charts/stable/transmission/README.md
@@ -1,6 +1,6 @@
 # transmission

-![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v3.00](https://img.shields.io/badge/AppVersion-v3.00-informational?style=flat-square)
+![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: v3.00](https://img.shields.io/badge/AppVersion-v3.00-informational?style=flat-square)

 Transmission is a cross-platform BitTorrent client

@@ -68,7 +68,7 @@ helm install transmission k8s-at-home/transmission -f values.yaml

 ## Custom configuration

-N/A
+To view more environment variables [see here](https://github.com/k8s-at-home/container-images/tree/main/apps/transmission/settings.json.tmpl)

 ## Values

@@ -76,8 +76,14 @@ N/A

 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| config | string | string | Transmission's settings.json configuration |
-| env | object | `{}` |  |
+| env.TRANSMISSION_DOWNLOAD_DIR | string | `"/downloads/complete"` | Torrent download directory |
+| env.TRANSMISSION_INCOMPLETE_DIR | string | `"/downloads/incomplete"` | Incomplete download directory |
+| env.TRANSMISSION_INCOMPLETE_DIR_ENABLED | bool | `false` | Enable incomplete download directory |
+| env.TRANSMISSION_RPC_PASSWORD | string | `"CHANGEME"` | Password to access the Web UI |
+| env.TRANSMISSION_WATCH_DIR | string | `"/watch"` | Watch directory |
+| env.TRANSMISSION_WATCH_DIR_ENABLED | bool | `false` | Enable watch directory |
+| env.TRANSMISSION_WEB_HOME | string | `"/web"` | Path in container where the Web UI is located |
+| env.TZ | string | `"UTC"` | Container timezone |
 | image.pullPolicy | string | `"IfNotPresent"` |  |
 | image.repository | string | `"ghcr.io/k8s-at-home/transmission"` |  |
 | image.tag | string | `"v3.00"` |  |
@@ -103,6 +109,12 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [6.0.0]
+
+#### Changed
+
+- **Breaking**: `.Values.config` is deprecated in favor of using environment variables for configuration. See [here](https://github.com/k8s-at-home/container-images/tree/main/apps/transmission/settings.json.tmpl) for more options.
+
 ### [5.0.0]

 #### Added
@@ -111,7 +123,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 #### Changed

- **Breaking**: `transmissionConfig` became `config` and is now a string not a object
+- **Breaking**: `transmissionConfig` became `config` and is now a string not an object

 ### [4.0.0]

@@ -131,6 +143,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - Initial commit

+[6.0.0]: #6.0.0
 [5.0.0]: #5.0.0
 [4.0.0]: #4.0.0
 [1.0.0]: #1.0.0
--- a/charts/stable/transmission/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/transmission/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [6.0.0]
+
+#### Changed
+
+- **Breaking**: `.Values.config` is deprecated in favor of using environment variables for configuration. See [here](https://github.com/k8s-at-home/container-images/tree/main/apps/transmission/settings.json.tmpl) for more options.
+
 ### [5.0.0]

 #### Added
@@ -37,6 +43,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - Initial commit

+[6.0.0]: #6.0.0
 [5.0.0]: #5.0.0
 [4.0.0]: #4.0.0
 [1.0.0]: #1.0.0
--- a/charts/stable/transmission/README_CONFIG.md.gotmpl
+++ b/charts/stable/transmission/README_CONFIG.md.gotmpl
@@ -5,5 +5,5 @@
 {{- define "custom.custom.configuration" -}}
 {{ template "custom.custom.configuration.header" . }}

-N/A
+To view more environment variables [see here](https://github.com/k8s-at-home/container-images/tree/main/apps/transmission/settings.json.tmpl)
 {{- end -}}
--- a/charts/stable/transmission/templates/common.yaml
+++ b/charts/stable/transmission/templates/common.yaml
@@ -1,31 +1 @@
-{{/* Make sure all variables are set properly */}}
-{{- include "common.values.setup" . }}
-
-{{/* Append the configMap to the additionalVolumes */}}
-{{- define "transmission.configmap.volume" -}}
-name: transmission-settings
-configMap:
-  name: {{ template "common.names.fullname" . }}-config
-{{- end -}}
-
-{{- $volume := include "transmission.configmap.volume" . | fromYaml -}}
-{{- if $volume -}}
-    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
-    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
-{{- end -}}
-
-{{/* Append the configMap volume to the additionalVolumeMounts */}}
-{{- define "transmission.configmap.volumeMount" -}}
-name: transmission-settings
-mountPath: /config/settings.json
-subPath: settings.json
-{{- end -}}
-
-{{- $volumeMount := include "transmission.configmap.volumeMount" . | fromYaml -}}
-{{- if $volumeMount -}}
-    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
-    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
-{{- end -}}
-
-{{/* Render the templates */}}
 {{ include "common.all" . }}
--- a/charts/stable/transmission/templates/configmap.yaml
+++ b/charts/stable/transmission/templates/configmap.yaml
@@ -1,9 +0,0 @@
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ template "common.names.fullname" . }}-config
-  labels:
-    {{- include "common.labels" . | nindent 4 }}
-data:
-  settings.json: |
-    {{- .Values.config | nindent 4 }}
--- a/charts/stable/transmission/values.yaml
+++ b/charts/stable/transmission/values.yaml
@@ -27,9 +27,26 @@ image:
 strategy:
  type: Recreate

-env: {}
-  # TZ: UTC
-  # TRANSMISSION_WEB_HOME: /config/flood
+# To view more enviornment variables see here:
+# https://github.com/k8s-at-home/container-images/tree/main/apps/transmission/settings.json.tmpl
+env:
+  # -- Container timezone
+  TZ: UTC
+  # -- Path in container where the Web UI is located
+  TRANSMISSION_WEB_HOME: /web
+  # -- Password to access the Web UI
+  TRANSMISSION_RPC_PASSWORD: CHANGEME
+  # -- Torrent download directory
+  TRANSMISSION_DOWNLOAD_DIR: /downloads/complete
+  # -- Enable incomplete download directory
+  TRANSMISSION_INCOMPLETE_DIR_ENABLED: false
+  # -- Incomplete download directory
+  TRANSMISSION_INCOMPLETE_DIR: /downloads/incomplete
+  # -- Enable watch directory
+  TRANSMISSION_WATCH_DIR_ENABLED: false
+  # -- Watch directory
+  TRANSMISSION_WATCH_DIR: /watch
+

 service:
  port:
@@ -65,19 +82,8 @@ probes:
    spec:
      timeoutSeconds: 30

-
 ingress:
  enabled: false
-  # annotations: {}
-  # hosts:
-  # - host: example.com
-  #   paths:
-  #   - path: /
-  #     pathType: Prefix
-  # tls:
-  # - secretName: example.com
-  #   hosts:
-  #    - example.com

 persistence:
  ## Directory for storing active torrent files, resume list,
@@ -111,77 +117,3 @@ persistence:
    emptyDir:
      enabled: false
    mountPath: /watch
-
-# -- Transmission's settings.json configuration
-# @default -- string
-config: |
-  {
-    "alt-speed-down": 50,
-    "alt-speed-enabled": false,
-    "alt-speed-time-begin": 540,
-    "alt-speed-time-day": 127,
-    "alt-speed-time-enabled": false,
-    "alt-speed-time-end": 1020,
-    "alt-speed-up": 50,
-    "bind-address-ipv4": "0.0.0.0",
-    "bind-address-ipv6": "::",
-    "blocklist-enabled": true,
-    "blocklist-url": "http://john.bitsurge.net/public/biglist.p2p.gz",
-    "cache-size-mb": 4,
-    "dht-enabled": true,
-    "download-dir": "/downloads/complete",
-    "download-queue-enabled": true,
-    "download-queue-size": 5,
-    "encryption": 1,
-    "idle-seeding-limit": 30,
-    "idle-seeding-limit-enabled": false,
-    "incomplete-dir": "/downloads/incomplete",
-    "incomplete-dir-enabled": true,
-    "lpd-enabled": false,
-    "message-level": 2,
-    "peer-congestion-algorithm": "",
-    "peer-id-ttl-hours": 6,
-    "peer-limit-global": 200,
-    "peer-limit-per-torrent": 50,
-    "peer-port": 51413,
-    "peer-port-random-high": 65535,
-    "peer-port-random-low": 49152,
-    "peer-port-random-on-start": false,
-    "peer-socket-tos": "default",
-    "pex-enabled": true,
-    "port-forwarding-enabled": false,
-    "preallocation": 1,
-    "prefetch-enabled": true,
-    "queue-stalled-enabled": true,
-    "queue-stalled-minutes": 30,
-    "ratio-limit": 2,
-    "ratio-limit-enabled": false,
-    "rename-partial-files": true,
-    "rpc-authentication-required": false,
-    "rpc-bind-address": "0.0.0.0",
-    "rpc-enabled": true,
-    "rpc-host-whitelist": "",
-    "rpc-host-whitelist-enabled": false,
-    "rpc-password": "CHANGEME",
-    "rpc-port": 9091,
-    "rpc-url": "/transmission/",
-    "rpc-username": "",
-    "rpc-whitelist": "",
-    "rpc-whitelist-enabled": false,
-    "scrape-paused-torrents-enabled": true,
-    "script-torrent-done-enabled": false,
-    "script-torrent-done-filename": "",
-    "seed-queue-enabled": false,
-    "seed-queue-size": 10,
-    "speed-limit-down": 100,
-    "speed-limit-down-enabled": false,
-    "speed-limit-up": 100,
-    "speed-limit-up-enabled": false,
-    "start-added-torrents": true,
-    "trash-original-torrent-files": false,
-    "umask": 2,
-    "upload-slots-per-torrent": 14,
-    "utp-enabled": true,
-    "watch-dir": "/watch",
-    "watch-dir-enabled": false
-  }
--- a/charts/stable/unifi/Chart.yaml
+++ b/charts/stable/unifi/Chart.yaml
@@ -2,13 +2,13 @@ apiVersion: v2
 appVersion: 6.0.45
 description: Ubiquiti Network's Unifi Controller
 name: unifi
-version: 2.0.0
+version: 2.0.1
 keywords:
  - ubiquiti
  - unifi
  - mongodb
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/unifi
-icon: https://blog.ubnt.com/wp-content/uploads/2016/10/unifi-app-logo.png
+icon: https://prd-www-cdn.ubnt.com/static/favicon-152.png
 sources:
  - https://github.com/jacobalberty/unifi-docker
 maintainers:
--- a/charts/stable/unifi/README.md
+++ b/charts/stable/unifi/README.md
@@ -1,6 +1,6 @@
 # unifi

-![Version: 1.5.6](https://img.shields.io/badge/Version-1.5.6-informational?style=flat-square) ![AppVersion: 6.0.45](https://img.shields.io/badge/AppVersion-6.0.45-informational?style=flat-square)
+![Version: 2.0.1](https://img.shields.io/badge/Version-2.0.1-informational?style=flat-square) ![AppVersion: 6.0.45](https://img.shields.io/badge/AppVersion-6.0.45-informational?style=flat-square)

 Ubiquiti Network's Unifi Controller

@@ -216,6 +216,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.0.1]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.5.3]

 #### Added
@@ -230,6 +244,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.0.1]: #2.0.1
 [1.5.3]: #1.5.3

 ## Support
--- a/charts/stable/unifi/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/unifi/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.0.1]
+
+#### Added
+
+- N/A
+
+#### Changed
+
+- Updated icon url
+
+#### Removed
+
+- N/A
+
 ### [1.5.3]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.0.1]: #2.0.1
 [1.5.3]: #1.5.3
 {{- end -}}
--- a/charts/stable/wallabag/Chart.yaml
+++ b/charts/stable/wallabag/Chart.yaml
@@ -2,11 +2,12 @@ apiVersion: v2
 appVersion: 2.4.1
 description: A self hostable application for saving web pages, freely.
 name: wallabag
-version: 2.3.1
+version: 2.4.1
 kubeVersion: ">=1.16.0-0"
 keywords:
 - wallabag
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/wallabag
+icon: "https://raw.githubusercontent.com/wallabag/logo/master/app-android/logo-app-android-icon-bg-white-512.png"
 sources:
 - https://github.com/wallabag/docker
 - https://hub.docker.com/wallabag/wallabag
@@ -17,3 +18,15 @@ dependencies:
 - name: common
  repository: https://library-charts.k8s-at-home.com
  version: 2.3.1
+- name: redis
+  version: 14.1.0
+  repository: https://charts.bitnami.com/bitnami
+  condition: redis.enabled
+- name: postgresql
+  version: 10.3.15
+  repository: https://charts.bitnami.com/bitnami
+  condition: postgresql.enabled
+- name: mariadb
+  version: 9.3.6
+  repository: https://charts.bitnami.com/bitnami
+  condition: mariadb.enabled
--- a/charts/stable/wallabag/README.md
+++ b/charts/stable/wallabag/README.md
@@ -1,6 +1,6 @@
 # wallabag

-![Version: 2.2.0](https://img.shields.io/badge/Version-2.2.0-informational?style=flat-square) ![AppVersion: 2.4.1](https://img.shields.io/badge/AppVersion-2.4.1-informational?style=flat-square)
+![Version: 2.4.1](https://img.shields.io/badge/Version-2.4.1-informational?style=flat-square) ![AppVersion: 2.4.1](https://img.shields.io/badge/AppVersion-2.4.1-informational?style=flat-square)

 A self hostable application for saving web pages, freely.

@@ -19,7 +19,10 @@ Kubernetes: `>=1.16.0-0`

 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.2.0 |
+| https://charts.bitnami.com/bitnami | mariadb | 9.3.6 |
+| https://charts.bitnami.com/bitnami | postgresql | 10.3.15 |
+| https://charts.bitnami.com/bitnami | redis | 14.1.0 |
+| https://library-charts.k8s-at-home.com | common | 2.3.1 |

 ## TL;DR

@@ -82,12 +85,26 @@ Default login is `wallabag:wallabag`.
 | image.repository | string | `"wallabag/wallabag"` |  |
 | image.tag | string | `"2.4.1"` |  |
 | ingress.enabled | bool | `false` |  |
+| mariadb.architecture | string | `"standalone"` |  |
+| mariadb.auth.database | string | `"wallabag"` |  |
+| mariadb.auth.password | string | `"wallabag-pass"` |  |
+| mariadb.auth.rootPassword | string | `"wallabag-rootpass"` |  |
+| mariadb.auth.username | string | `"wallabag"` |  |
+| mariadb.enabled | bool | `false` |  |
+| mariadb.primary.persistence.enabled | bool | `false` |  |
 | persistence.cache.emptyDir.enabled | bool | `false` |  |
 | persistence.cache.enabled | bool | `false` |  |
 | persistence.cache.mountPath | string | `"/var/www/wallabag/var/cache"` |  |
 | persistence.images.emptyDir.enabled | bool | `false` |  |
 | persistence.images.enabled | bool | `false` |  |
 | persistence.images.mountPath | string | `"/var/www/wallabag/web/assets/images"` |  |
+| postgresql.enabled | bool | `false` |  |
+| postgresql.persistence.enabled | bool | `false` |  |
+| postgresql.postgresqlDatabase | string | `"wallabag"` |  |
+| postgresql.postgresqlPassword | string | `"wallabag-pass"` |  |
+| postgresql.postgresqlUsername | string | `"wallabag"` |  |
+| redis.auth.enabled | bool | `false` |  |
+| redis.enabled | bool | `false` |  |
 | service.port.port | int | `80` |  |
 | strategy.type | string | `"RollingUpdate"` |  |

@@ -97,6 +114,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.4.1]
+
+#### Added
+
+- Icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -111,6 +142,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.4.1]: #[2.4.1]
 [1.0.0]: #1.0.0

 ## Support
@@ -121,4 +153,4 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Join our [Discord](https://discord.gg/sTMX7Vh) community

 ----------------------------------------------
-Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)
--- a/charts/stable/wallabag/README_CHANGELOG.md.gotmpl
+++ b/charts/stable/wallabag/README_CHANGELOG.md.gotmpl
@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi

 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+### [2.4.1]
+
+#### Added
+
+- Icon url
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
 ### [1.0.0]

 #### Added
@@ -23,5 +37,6 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),

 - N/A

+[2.4.1]: #[2.4.1]
 [1.0.0]: #1.0.0
 {{- end -}}
--- a/charts/stable/wallabag/values.yaml
+++ b/charts/stable/wallabag/values.yaml
@@ -84,3 +84,34 @@ persistence:
    emptyDir:
      enabled: false
    mountPath: /var/www/wallabag/var/cache
+
+# Enabled mariadb
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/mariadb
+mariadb:
+  enabled: false
+  architecture: standalone
+  auth:
+    database: wallabag
+    username: wallabag
+    password: wallabag-pass
+    rootPassword: wallabag-rootpass
+  primary:
+    persistence:
+      enabled: false
+
+# Enabled postgres
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/postgresql
+postgresql:
+  enabled: false
+  postgresqlUsername: wallabag
+  postgresqlPassword: wallabag-pass
+  postgresqlDatabase: wallabag
+  persistence:
+    enabled: false
+
+# Enabled redis
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/redis
+redis:
+  enabled: false
+  auth:
+    enabled: false
Author	SHA1	Message	Date
nιcнolaѕ wιlde	0258032687	Updated icon url (#855 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:48:33 +02:00
nιcнolaѕ wιlde	2c91a14ee7	Updated icon url (#856 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:47:31 +02:00
nιcнolaѕ wιlde	9e4786989d	Updated icon url (#869 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:46:46 +02:00
nιcнolaѕ wιlde	9d4d0aac04	Added icon url (#871 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:46:08 +02:00
nιcнolaѕ wιlde	7ea17d2597	Updated broken icon url (#870 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:45:15 +02:00
nιcнolaѕ wιlde	71b339bad2	Updated icon url (#873 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:44:19 +02:00
nιcнolaѕ wιlde	534de68571	Updated icon url (#872 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:43:30 +02:00
nιcнolaѕ wιlde	29ae29acf9	Added icon url (#854 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:42:37 +02:00
nιcнolaѕ wιlde	fedf396ed3	Added icon url (#865 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 16:41:13 +02:00
nιcнolaѕ wιlde	60819426c1	Updated broken icon url (#864 )	2021-05-02 16:39:35 +02:00
nιcнolaѕ wιlde	84ab22ed6b	Added icon url (#853 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 09:05:01 -04:00
nιcнolaѕ wιlde	6ee5e4054c	Added icon url (#852 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-02 08:52:38 -04:00
Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs	a16132ba7d	[CI] Fix CI Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev>	2021-05-02 10:22:09 +02:00
nιcнolaѕ wιlde	4bde90909a	Updated icon url (#851 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-01 22:03:38 -04:00
nιcнolaѕ wιlde	590bb3f597	[lychee] Updated icon url (#850 ) * Updated icon url Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> * Bumped chart version Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-01 21:59:41 -04:00
nιcнolaѕ wιlde	110a4d4d82	Changed icon url (#849 ) Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> Co-authored-by: ᗪєνιη ᗷυнʟ <onedr0p@users.noreply.github.com>	2021-05-01 21:54:18 -04:00
nιcнolaѕ wιlde	a9898bb895	[focalboard] Updated icon (#848 ) * ingress hosts syntax error * Updaed icon url Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> * Fixing pre-commit issues Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> * Removing wikijs values commit Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> Co-authored-by: fanlix <fanlix@gmail.com>	2021-05-01 20:11:13 -04:00
nιcнolaѕ wιlde	e6718e2234	[syncthing] Updated icon url (#847 ) * Updated icon url Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com> * Fixing pre-commit issues Signed-off-by: Nicholas Wilde <ncwilde43@gmail.com>	2021-05-01 19:10:32 -04:00
renovate[bot]	a98f42b657	chore(deps): update pre-commit/action action to v2.0.3 (#846 ) Co-authored-by: Renovate Bot <bot@renovateapp.com>	2021-05-01 07:52:30 -04:00
Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs	8394533292	[CI] Add pre-commit check (#845 ) * [CI] Add pre-commit check Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Add other folder for testing Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Simplify CI Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Update pre-commit Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Update job name Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Linter issues Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Fix conditionals Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Separate chart linting and pre-commit Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Change workflow name Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev> * Allow running against all files Signed-off-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev>	2021-05-01 07:27:23 -04:00
renovate[bot]	f5e0e308b9	chore(deps): update dependency pry to v0.14.1 (#843 ) Co-authored-by: Renovate Bot <bot@renovateapp.com>	2021-04-30 20:56:16 -04:00
Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs	9a6dd78778	[CI] Remove check-version, turnstyle (#836 )	2021-04-29 19:37:14 +02:00
Antoine Bertin	66a7ab60e2	[wallabag] add dependency charts (#833 ) * [wallabag] add dependency charts * [wallabag] fix redis chart version * [wallabag] add mariadb enabled example * [wallabag] update helm-docs	2021-04-26 11:05:38 -04:00
Antoine Bertin	e145839479	[sharry] use a config blockk (#832 ) * [sharry] use a config blockk * [sharry] update docs * [sharry] use default config as example * [sharry] comment out nginx annotations * [sharry] fix config indentation and add base-url example * [sharry] add bind configuration	2021-04-25 18:09:08 -04:00
ᗪєνιη ᗷυнʟ	c89748678f	[transmission] use env config (#830 ) * feat: use env config * fix: update common yaml to remove configmap	2021-04-25 15:14:18 -04:00