fix pod-gateway service definition (#1003)

Co-authored-by: angelnu <git@angelnucom>

.github/workflows/charts-lint-test.yaml

@@ -9,9 +9,12 @@ on:
     - '!charts/**/README_CHANGELOG.md.gotmpl'
     - '!charts/**/README_CONFIG.md.gotmpl'
 
+concurrency:
+  group: ${{ github.head_ref }}-lint
+  cancel-in-progress: true
+
 jobs:
   changes-lint:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Detect changes for linting
     runs-on: ubuntu-20.04
     outputs:
@@ -47,7 +50,6 @@ jobs:
         fi
 
   changes-install:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Detect changes for install
     runs-on: ubuntu-20.04
     outputs:
@@ -85,7 +87,8 @@ jobs:
   lint:
     needs:
     - changes-lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-lint.outputs.detected == 'true'"
+    if:
+      needs.changes-lint.outputs.detected == 'true'
     name: Lint charts
     runs-on: ubuntu-20.04
     steps:
@@ -113,7 +116,6 @@ jobs:
   unittest:
     needs:
     - lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Run unit tests
     runs-on: ubuntu-20.04
     steps:
@@ -149,7 +151,8 @@ jobs:
     needs:
     - changes-install
     - lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-install.outputs.detected == 'true'"
+    if:
+      needs.changes-install.outputs.detected == 'true'
     name: Install charts
     strategy:
       matrix: ${{ fromJson(needs.changes-install.outputs.matrix) }}
@@ -196,5 +199,5 @@ jobs:
     runs-on: ubuntu-20.04
     steps:
     - name: Check install matrix status
-      if: ${{ !contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-install.outputs.detected == 'true' && needs.install.result != 'success' }}
+      if: ${{ needs.changes-install.outputs.detected == 'true' && needs.install.result != 'success' }}
       run: exit 1

.github/workflows/charts-release.yaml

@@ -9,20 +9,96 @@ on:
     - master
     paths:
     - 'charts/**'
-    - '!charts/README.md'
-    - '!charts/**/README.md'
-    - '!charts/**/README.md.gotmpl'
-    - '!charts/**/README_CHANGELOG.md.gotmpl'
-    - '!charts/**/README_CONFIG.md.gotmpl'
 
 jobs:
-  release:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
+  generate-readme:
+    name: Auto-generate chart README
     runs-on: ubuntu-20.04
     steps:
+    - name: Get k8s-at-home token
+      id: get-app-token
+      uses: getsentry/action-github-app-token@v1
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - name: Checkout
+      uses: actions/checkout@v2
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        ref: ${{ github.ref }}
+
+    - uses: dorny/paths-filter@v2
+      id: filter
+      with:
+        base: ${{ github.ref }}
+        list-files: shell
+        filters: |
+          addedOrModified:
+            - added|modified: 'charts/**'
+
+    - name: Install Helm
+      if: steps.filter.outputs.addedOrModified == 'true'
+      uses: azure/setup-helm@v1
+      with:
+        version: v3.5.3
+
+    - uses: actions/setup-python@v2
+      if: steps.filter.outputs.addedOrModified == 'true'
+      with:
+        python-version: 3.7
+
+    - name: Install helm-docs
+      if: steps.filter.outputs.addedOrModified == 'true'
+      run: |
+        wget -O /tmp/helm-docs.deb  https://github.com/norwoodj/helm-docs/releases/download/v1.5.0/helm-docs_1.5.0_linux_amd64.deb
+        sudo dpkg -i /tmp/helm-docs.deb
+
+    - name: Run against changed charts
+      if: steps.filter.outputs.addedOrModified == 'true'
+      run: |
+        CHARTS=()
+        PATHS=(${{ steps.filter.outputs.addedOrModified_files }})
+        # Get only the chart paths
+        for i in "${PATHS[@]}"
+        do
+            IFS='/' read -r -a path_parts <<< "$i"
+            CHARTS+=("${path_parts[1]}/${path_parts[2]}")
+        done
+
+        # Remove duplicates
+        CHARTS=( `for i in ${CHARTS[@]}; do echo $i; done | sort -u` )
+
+        for i in "${CHARTS[@]}"
+        do
+            echo "Rendering README for chart ${i}"
+            IFS='/' read -r -a chart_parts <<< "$i"
+            if [ -f "charts/${chart_parts[0]}"/"${chart_parts[1]}/Chart.yaml" ]; then
+              ./hack/gen-helm-docs.sh "${chart_parts[0]}" "${chart_parts[1]}"
+            fi
+            echo ""
+        done
+
+    - name: Create commit
+      if: steps.filter.outputs.addedOrModified == 'true'
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        push_options: --force
+        commit_message: Auto-generate chart README [no ci]
+        commit_user_name: k8s-at-home[bot]
+        commit_user_email: <k8s-at-home[bot]@users.noreply.github.com>
+        commit_author: k8s-at-home[bot] <k8s-at-home[bot]@users.noreply.github.com>
+        file_pattern: charts/**/
+
+  release:
+    runs-on: ubuntu-20.04
+    needs:
+    - generate-readme
+    steps:
     - name: Checkout
       uses: actions/checkout@v2
       with:
+        ref: master
         fetch-depth: 0
 
     - name: Configure Git
@@ -45,7 +121,6 @@ jobs:
         CR_SKIP_EXISTING: "true"
 
   generate-summary:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Auto-generate charts summary
     runs-on: ubuntu-20.04
     steps:
@@ -71,10 +146,11 @@ jobs:
       run: |
         ./hack/gen-chart-summary.sh
 
-    - name: Update Pull Request
+    - name: Create Commit
       uses: stefanzweifel/git-auto-commit-action@v4
       with:
-        commit_message: Auto-generate chart summary [ci skip]
+        push_options: --force
+        commit_message: Auto-generate chart summary [no ci]
         commit_user_name: k8s-at-home[bot]
         commit_user_email: <k8s-at-home[bot]@users.noreply.github.com>
         commit_author: k8s-at-home[bot] <k8s-at-home[bot]@users.noreply.github.com>

.github/workflows/pre-commit-check.yaml

@@ -4,9 +4,12 @@ on:
   workflow_dispatch:
   pull_request:
 
+concurrency:
+  group: ${{ github.head_ref }}-precommit
+  cancel-in-progress: true
+
 jobs:
   pre-commit-check:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Run pre-commit checks
     runs-on: ubuntu-20.04
     steps:

charts/stable/adguard-home/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v0.105.2
+appVersion: v0.106.3
 description: DNS proxy as ad-blocker for local network
 name: adguard-home
-version: 3.3.1
+version: 4.0.1
 kubeVersion: ">=1.16.0-0"
 keywords:
 - adguard-home
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/adguard-home/README.md

@@ -1,6 +1,6 @@
 # adguard-home
 
-![Version: 3.3.1](https://img.shields.io/badge/Version-3.3.1-informational?style=flat-square) ![AppVersion: v0.105.2](https://img.shields.io/badge/AppVersion-v0.105.2-informational?style=flat-square)
+![Version: 4.0.1](https://img.shields.io/badge/Version-4.0.1-informational?style=flat-square) ![AppVersion: v0.106.3](https://img.shields.io/badge/AppVersion-v0.106.3-informational?style=flat-square)
 
 DNS proxy as ad-blocker for local network
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -75,39 +75,18 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| args[0] | string | `"--config"` |  |
-| args[1] | string | `"/opt/adguardhome/conf/AdGuardHome.yaml"` |  |
-| args[2] | string | `"--work-dir"` |  |
-| args[3] | string | `"/opt/adguardhome/work"` |  |
-| args[4] | string | `"--no-check-update"` |  |
-| config | string | `"bind_host: 0.0.0.0\nbind_port: 3000\nbeta_bind_port: 0\nusers: []\nhttp_proxy: \"\"\nlanguage: en\nrlimit_nofile: 0\ndebug_pprof: false\nweb_session_ttl: 720\ndns:\n  bind_host: 0.0.0.0\n  port: 53\n  statistics_interval: 1\n  querylog_enabled: true\n  querylog_file_enabled: true\n  querylog_interval: 90\n  querylog_size_memory: 1000\n  anonymize_client_ip: false\n  protection_enabled: true\n  blocking_mode: default\n  blocking_ipv4: \"\"\n  blocking_ipv6: \"\"\n  blocked_response_ttl: 10\n  parental_block_host: family-block.dns.adguard.com\n  safebrowsing_block_host: standard-block.dns.adguard.com\n  ratelimit: 0\n  ratelimit_whitelist: []\n  refuse_any: true\n  upstream_dns:\n  - https://dns10.quad9.net/dns-query\n  upstream_dns_file: \"\"\n  bootstrap_dns:\n  - 9.9.9.10\n  - 149.112.112.10\n  - 2620:fe::10\n  - 2620:fe::fe:10\n  all_servers: false\n  fastest_addr: false\n  allowed_clients: []\n  disallowed_clients: []\n  blocked_hosts: []\n  cache_size: 4194304\n  cache_ttl_min: 0\n  cache_ttl_max: 0\n  bogus_nxdomain: []\n  aaaa_disabled: false\n  enable_dnssec: false\n  edns_client_subnet: false\n  max_goroutines: 300\n  ipset: []\n  filtering_enabled: true\n  filters_update_interval: 24\n  parental_enabled: false\n  safesearch_enabled: false\n  safebrowsing_enabled: false\n  safebrowsing_cache_size: 1048576\n  safesearch_cache_size: 1048576\n  parental_cache_size: 1048576\n  cache_time: 30\n  rewrites: []\n  blocked_services: []\n  customresolver: null\ntls:\n  enabled: false\n  server_name: \"\"\n  force_https: false\n  port_https: 443\n  port_dns_over_tls: 853\n  port_dns_over_quic: 784\n  port_dnscrypt: 0\n  dnscrypt_config_file: \"\"\n  allow_unencrypted_doh: false\n  strict_sni_check: false\n  certificate_chain: \"\"\n  private_key: \"\"\n  certificate_path: \"\"\n  private_key_path: \"\"\nfilters:\n- enabled: true\n  url: https://adguardteam.github.io/AdGuardSDNSFilter/Filters/filter.txt\n  name: AdGuard DNS filter\n  id: 1\n- enabled: false\n  url: https://adaway.org/hosts.txt\n  name: AdAway\n  id: 2\n- enabled: false\n  url: https://www.malwaredomainlist.com/hostslist/hosts.txt\n  name: MalwareDomainList.com Hosts List\n  id: 4\nwhitelist_filters: []\nuser_rules: []\ndhcp:\n  enabled: false\n  interface_name: \"\"\n  dhcpv4:\n    gateway_ip: \"\"\n    subnet_mask: \"\"\n    range_start: \"\"\n    range_end: \"\"\n    lease_duration: 86400\n    icmp_timeout_msec: 1000\n    options: []\n  dhcpv6:\n    range_start: \"\"\n    lease_duration: 86400\n    ra_slaac_only: false\n    ra_allow_slaac: false\nclients: []\nlog_compress: false\nlog_localtime: false\nlog_max_backups: 0\nlog_max_size: 100\nlog_max_age: 3\nlog_file: \"\"\nverbose: false\nschema_version: 7\n"` |  |
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"adguard/adguardhome"` |  |
-| image.tag | string | `"v0.105.2"` |  |
-| initContainers[0].command[0] | string | `"sh"` |  |
-| initContainers[0].command[1] | string | `"-c"` |  |
-| initContainers[0].command[2] | string | `"if [ ! -f /opt/adguardhome/conf/AdGuardHome.yaml ]; then\n  mkdir -p /opt/adguardhome/conf\n  cp /tmp/AdGuardHome.yaml /opt/adguardhome/conf/AdGuardHome.yaml\nfi\n"` |  |
-| initContainers[0].image | string | `"busybox"` |  |
-| initContainers[0].name | string | `"copy-configmap"` |  |
-| initContainers[0].securityContext.runAsUser | int | `0` |  |
-| initContainers[0].volumeMounts[0].mountPath | string | `"/tmp/AdGuardHome.yaml"` |  |
-| initContainers[0].volumeMounts[0].name | string | `"adguard-home-config"` |  |
-| initContainers[0].volumeMounts[0].subPath | string | `"AdGuardHome.yaml"` |  |
-| initContainers[0].volumeMounts[1].mountPath | string | `"/opt/adguardhome/conf"` |  |
-| initContainers[0].volumeMounts[1].name | string | `"config"` |  |
-| persistence.config.emptyDir.enabled | bool | `true` |  |
-| persistence.config.enabled | bool | `true` |  |
-| persistence.config.mountPath | string | `"/opt/adguardhome/conf"` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/opt/adguardhome/work"` |  |
-| prometheus.serviceMonitor.additionalLabels | object | `{}` |  |
-| prometheus.serviceMonitor.enabled | bool | `false` |  |
-| prometheus.serviceMonitor.interval | string | `"30s"` |  |
-| replicas | int | `1` | (int) Number of pods to load balance between |
-| service.port.port | int | `3000` |  |
-| strategy.type | string | `"Recreate"` |  |
+| args | list | `["--config","/opt/adguardhome/conf/AdGuardHome.yaml","--work-dir","/opt/adguardhome/work","--no-check-update"]` | arguments passed to the adguard-home command line. |
+| config | string | See values.yaml | AdGuard Home configuration. For a full list of options see https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration. |
+| controller.replicas | int | `1` | Number of pods to load balance between |
+| env | object | See below | environment variables. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"adguard/adguardhome"` | image repository |
+| image.tag | string | `"v0.106.3"` | image tag |
+| initContainers[0] | object | See values.yaml | Configures an initContainer that copies the configmap to the AdGuardHome conf directory It does NOT overwrite when the file already exists. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| prometheus.serviceMonitor | object | See values.yaml | Enable and configure a Prometheus serviceMonitor for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -115,6 +94,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.1]
+
+#### Fixed
+
+- Fixed the default protocol for the `dns-udp` port.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.0/charts/stable/common/) for the up-to-date values.
+- Updated the image tag to v0.106.3.
+
 ### [3.3.1]
 
 #### Changed
@@ -135,6 +128,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[4.0.1]: #4.0.1
+[4.0.0]: #4.0.0
 [3.3.1]: #3.3.1
 [3.0.0]: #3.0.0
 

charts/stable/adguard-home/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.1]
+
+#### Fixed
+
+- Fixed the default protocol for the `dns-udp` port.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.0/charts/stable/common/) for the up-to-date values.
+- Updated the image tag to v0.106.3.
+
 ### [3.3.1]
 
 #### Changed
@@ -29,6 +43,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[4.0.1]: #4.0.1
+[4.0.0]: #4.0.0
 [3.3.1]: #3.3.1
 [3.0.0]: #3.0.0
 {{- end -}}

charts/stable/adguard-home/ci/ct-values.yaml

@@ -1,11 +1,9 @@
 persistence:
   config:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /opt/adguardhome/conf
   data:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /opt/adguardhome/work

charts/stable/adguard-home/templates/common.yaml

@@ -1,31 +1,17 @@
 {{/* Make sure all variables are set properly */}}
 {{- include "common.values.setup" . }}
 
-{{/* Append the configMap to the additionalVolumes */}}
-{{- define "adguard-home.configmap.volume" -}}
-name: adguard-home-config
-configMap:
-  name: {{ template "common.names.fullname" . }}-config
-{{- end -}}
-
-{{- $volume := include "adguard-home.configmap.volume" . | fromYaml -}}
-{{- if $volume -}}
-    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
-    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
-{{- end -}}
-
-{{/* Append the configMap volume to the additionalVolumeMounts */}}
-{{- define "adguard-home.configmap.volumeMount" -}}
-name: adguard-home-config
-mountPath: /tmp/AdGuardHome.yaml
-subPath: AdGuardHome.yaml
-{{- end -}}
-
-{{- $volumeMount := include "adguard-home.configmap.volumeMount" . | fromYaml -}}
-{{- if $volumeMount -}}
-    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
-    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
+{{/* Append the configMap volume to the volumes */}}
+{{- define "adguard-home.configVolume" -}}
+enabled: "true"
+mountPath: "/tmp/AdGuardHome.yaml"
+subPath: "AdGuardHome.yaml"
+type: "custom"
+volumeSpec:
+  configMap:
+    name: {{ include "common.names.fullname" . }}-config
 {{- end -}}
+{{- $_ := set .Values.persistence "adguard-home-config" (include "adguard-home.configVolume" . | fromYaml) -}}
 
 {{/* Render the templates */}}
 {{ include "common.all" . }}

charts/stable/adguard-home/values.yaml

@@ -5,9 +5,14 @@
 # https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml
 #
 
-# Copy the configmap to the AdGuardHome conf directory
-# Do NOT overwrite when the file already exists
+controller:
+  # -- Number of pods to load balance between
+  replicas: 1
+
 initContainers:
+# -- Configures an initContainer that copies the configmap to the AdGuardHome conf directory
+# It does NOT overwrite when the file already exists.
+# @default -- See values.yaml
 - name: copy-configmap
   image: busybox
   command:
@@ -28,16 +33,20 @@ initContainers:
     runAsUser: 0
 
 image:
+  # -- image repository
   repository: adguard/adguardhome
-  tag: v0.105.2
+  # -- image tag
+  tag: v0.106.3
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
+# -- environment variables.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- arguments passed to the adguard-home command line.
 args:
 - "--config"
 - "/opt/adguardhome/conf/AdGuardHome.yaml"
@@ -45,57 +54,48 @@ args:
 - "/opt/adguardhome/work"
 - "--no-check-update"
 
-# -- (int) Number of pods to load balance between
-replicas: 1
-
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 3000
-  # additionalServices:
-  # - enabled: true
-  #   nameSuffix: dns-tcp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-tcp
-  #     protocol: TCP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
-  # - enabled: true
-  #   nameSuffix: dns-udp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-udp
-  #     protocol: UDP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
+  main:
+    primary: true
+    ports:
+      http:
+        port: 3000
+  dns-tcp:
+    enabled: true
+    type: NodePort
+    ports:
+      dns-tcp:
+        enabled: true
+        port: 53
+        protocol: TCP
+        targetPort: 53
+    externalTrafficPolicy: Local
+  dns-udp:
+    enabled: true
+    type: NodePort
+    ports:
+      dns-udp:
+        enabled: true
+        port: 53
+        protocol: UDP
+        targetPort: 53
+    externalTrafficPolicy: Local
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: true
-    emptyDir:
-      enabled: true
     mountPath: /opt/adguardhome/conf
   data:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /opt/adguardhome/work
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
 prometheus:
+  # -- Enable and configure a Prometheus serviceMonitor for the chart under this key.
+  # @default -- See values.yaml
   serviceMonitor:
     enabled: false
     interval: 30s
@@ -105,20 +105,23 @@ prometheus:
 #   prometheus.io/scrape: "true"
 #   prometheus.io/port: "api"
 
-# -- Full list of options https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration
-# @default -- string
+# config -- AdGuard Home configuration. For a full list of options see https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration.
+# @default -- See values.yaml
 config: |
   bind_host: 0.0.0.0
   bind_port: 3000
   beta_bind_port: 0
   users: []
+  auth_attempts: 5
+  block_auth_min: 15
   http_proxy: ""
   language: en
   rlimit_nofile: 0
   debug_pprof: false
   web_session_ttl: 720
   dns:
-    bind_host: 0.0.0.0
+    bind_hosts:
+    - 0.0.0.0
     port: 53
     statistics_interval: 1
     querylog_enabled: true
@@ -169,7 +172,9 @@ config: |
     cache_time: 30
     rewrites: []
     blocked_services: []
-    customresolver: null
+    local_domain_name: lan
+    resolve_clients: true
+    local_ptr_upstreams: []
   tls:
     enabled: false
     server_name: ""
@@ -224,4 +229,4 @@ config: |
   log_max_age: 3
   log_file: ""
   verbose: false
-  schema_version: 7
+  schema_version: 10

charts/stable/airsonic/README.md

@@ -1,6 +1,6 @@
 # airsonic
 
-![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 10.6.2](https://img.shields.io/badge/AppVersion-10.6.2-informational?style=flat-square)
+![Version: 3.0.2](https://img.shields.io/badge/Version-3.0.2-informational?style=flat-square) ![AppVersion: 10.6.2](https://img.shields.io/badge/AppVersion-10.6.2-informational?style=flat-square)
 
 Airsonic is a Free and Open Source community driven media server
 
@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/alertmanager-bot/README.md

@@ -1,6 +1,6 @@
 # alertmanager-bot
 
-![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 0.4.3](https://img.shields.io/badge/AppVersion-0.4.3-informational?style=flat-square)
+![Version: 5.0.1](https://img.shields.io/badge/Version-5.0.1-informational?style=flat-square) ![AppVersion: 0.4.3](https://img.shields.io/badge/AppVersion-0.4.3-informational?style=flat-square)
 
 Bot for Prometheus Alertmanager
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/booksonic-air/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2009.1.0
 description: Booksonic is a platform for accessing the audibooks you own wherever you are
 name: booksonic-air
-version: 4.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - booksonic
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/booksonic-air/README.md

@@ -1,6 +1,6 @@
 # booksonic-air
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: v2009.1.0](https://img.shields.io/badge/AppVersion-v2009.1.0-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v2009.1.0](https://img.shields.io/badge/AppVersion-v2009.1.0-informational?style=flat-square)
 
 Booksonic is a platform for accessing the audibooks you own wherever you are
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -78,24 +78,15 @@ by not constantly monitoring media folders.
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/booksonic-air"` |  |
-| image.tag | string | `"v2009.1.0-ls2"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.audiobooks.emptyDir.enabled | bool | `false` |  |
-| persistence.audiobooks.enabled | bool | `false` |  |
-| persistence.audiobooks.mountPath | string | `"/audiobooks"` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.othermedia.emptyDir.enabled | bool | `false` |  |
-| persistence.othermedia.enabled | bool | `false` |  |
-| persistence.othermedia.mountPath | string | `"/othermedia"` |  |
-| persistence.podcasts.emptyDir.enabled | bool | `false` |  |
-| persistence.podcasts.enabled | bool | `false` |  |
-| persistence.podcasts.mountPath | string | `"/podcasts"` |  |
-| service.port.port | int | `4040` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/linuxserver/booksonic-air"` | image repository |
+| image.tag | string | `"version-v2009.1.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -103,21 +94,16 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v2009.1.0`
+- Changed image repository to `ghcr.io/linuxserver/booksonic-air`
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 
 ## Support
 

charts/stable/booksonic-air/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v2009.1.0`
+- Changed image repository to `ghcr.io/linuxserver/booksonic-air`
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 {{- end -}}

charts/stable/booksonic-air/values.yaml

@@ -6,56 +6,47 @@
 #
 
 image:
-  repository: linuxserver/booksonic-air
+  # -- image repository
+  repository: ghcr.io/linuxserver/booksonic-air
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v2009.1.0-ls2
+  # -- image tag
+  tag: version-v2009.1.0
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
-  # PUID: "1001"
-  # PGID: "1001"
-  # CONTEXT_PATH=url-base # Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+# See more environment variables in the [booksonic-air documentation](https://github.com/linuxserver/docker-booksonic-air#parameters)
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1001"
+  # -- Specify the group ID the application will run as
+  PGID: "1001"
+  # -- Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+  # CONTEXT_PATH=url-base
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 4040
+  main:
+    ports:
+      http:
+        port: 4040
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-
   audiobooks:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /audiobooks
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
   podcasts:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /podcasts
   othermedia:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /othermedia

charts/stable/bookstack/README.md

@@ -1,6 +1,6 @@
 # bookstack
 
-![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: v21.05.1](https://img.shields.io/badge/AppVersion-v21.05.1-informational?style=flat-square)
+![Version: 2.0.1](https://img.shields.io/badge/Version-2.0.1-informational?style=flat-square) ![AppVersion: v21.05.1](https://img.shields.io/badge/AppVersion-v21.05.1-informational?style=flat-square)
 
 A simple, self-hosted, easy-to-use platform for organising and storing information.
 
@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`
 | Repository | Name | Version |
 |------------|------|---------|
 | https://charts.bitnami.com/bitnami | mariadb | 9.3.13 |
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/calibre-web/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 0.6.9
+appVersion: 0.6.12
 description: Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database.
 name: calibre-web
-version: 6.4.0
+version: 7.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - calibre
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/calibre-web/README.md

@@ -1,6 +1,6 @@
 # calibre-web
 
-![Version: 6.4.0](https://img.shields.io/badge/Version-6.4.0-informational?style=flat-square) ![AppVersion: 0.6.9](https://img.shields.io/badge/AppVersion-0.6.9-informational?style=flat-square)
+![Version: 7.0.0](https://img.shields.io/badge/Version-7.0.0-informational?style=flat-square) ![AppVersion: 0.6.12](https://img.shields.io/badge/AppVersion-0.6.12-informational?style=flat-square)
 
 Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,17 +76,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/calibre-web"` |  |
-| image.tag | string | `"version-0.6.9"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.books.emptyDir.enabled | bool | `false` |  |
-| persistence.books.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.port.port | int | `8083` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [calibre-web documentation](https://github.com/linuxserver/docker-calibre-web#parameters). |
+| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/calibre-web"` | image repository |
+| image.tag | string | `"version-0.6.12"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -94,21 +93,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-0.6.12`.
 
-- N/A
-
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 
 ## Support
 

charts/stable/calibre-web/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-0.6.12`.
 
-- N/A
-
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 {{- end -}}

charts/stable/calibre-web/values.yaml

@@ -6,46 +6,43 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/calibre-web
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: version-0.6.9
+  # -- image tag
+  tag: version-0.6.12
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
-  # PUID:
-  # PGID:
-  # UMASK:
-  # DOCKER_MODS:
+# -- environment variables. See more environment variables in the [calibre-web documentation](https://github.com/linuxserver/docker-calibre-web#parameters).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1001"
+  # -- Specify the group ID the application will run as
+  PGID: "1001"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8083
+  main:
+    ports:
+      http:
+        port: 8083
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-
+    mountPath: /config
   books:
     enabled: false
-    emptyDir:
-      enabled: false
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Set to true to retain the PVC upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
+    mountPath: /books

charts/stable/deluge/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2.0.3-2201906121747
 description: Deluge is a torrent download client
 name: deluge
-version: 3.4.0
+version: 4.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - deluge
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/deluge/README.md

@@ -1,6 +1,6 @@
 # deluge
 
-![Version: 3.4.0](https://img.shields.io/badge/Version-3.4.0-informational?style=flat-square) ![AppVersion: v2.0.3-2201906121747](https://img.shields.io/badge/AppVersion-v2.0.3--2201906121747-informational?style=flat-square)
+![Version: 4.0.0](https://img.shields.io/badge/Version-4.0.0-informational?style=flat-square) ![AppVersion: v2.0.3-2201906121747](https://img.shields.io/badge/AppVersion-v2.0.3--2201906121747-informational?style=flat-square)
 
 Deluge is a torrent download client
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -78,19 +78,17 @@ The default login details (change ASAP) are:
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/deluge"` |  |
-| image.tag | string | `"version-2.0.3-2201906121747ubuntu18.04.1"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/config"` |  |
-| persistence.downloads.emptyDir.enabled | bool | `false` |  |
-| persistence.downloads.enabled | bool | `false` |  |
-| persistence.downloads.mountPath | string | `"/downloads"` |  |
-| service.port.port | int | `8112` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [deluge documentation](https://github.com/linuxserver/docker-deluge#parameters). |
+| env.DELUGE_LOGLEVEL | string | `"error"` | Set the loglevel output when running Deluge |
+| env.PGID | string | `"1000"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1000"` | Specify the user ID the application will run as |
+| env.TZ | string | `"Europe/London"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/deluge"` | image repository |
+| image.tag | string | `"version-2.0.3-2201906121747ubuntu18.04.1"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -98,21 +96,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [4.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[4.0.0]: #400
 
 ## Support
 

charts/stable/deluge/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [4.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[4.0.0]: #400
 {{- end -}}

charts/stable/deluge/values.yaml

@@ -6,50 +6,45 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/deluge
+  # -- image pull policy
   pullPolicy: IfNotPresent
+  # -- image tag
   tag: version-2.0.3-2201906121747ubuntu18.04.1
 
-strategy:
-  type: Recreate
+# -- environment variables. See more environment variables in the [deluge documentation](https://github.com/linuxserver/docker-deluge#parameters).
+# @default -- See below
+env:
+  # -- Specify the user ID the application will run as
+  PUID: "1000"
+  # -- Specify the group ID the application will run as
+  PGID: "1000"
+  # -- Set the container timezone
+  TZ: "Europe/London"
+  # -- Set the loglevel output when running Deluge
+  DELUGE_LOGLEVEL: "error"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8112
+  main:
+    ports:
+      http:
+        port: 8112
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /config
-
   downloads:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /downloads
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
-
-env: {}
-  ## Optional ENV Vars that can be set.
-  ## All values below are the current default values.
-  # PUID: "1000"
-  # PGID: "1000"
-  # TZ: "Europe/London"
-  # UMASK_SET: "022"
-  # DELUGE_LOGLEVEL: "error"

charts/stable/dizquetv/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 1.3.0
+appVersion: 1.4.3
 description: Create live TV channel streams from media on your Plex servers.
 name: dizquetv
-version: 2.4.0
+version: 3.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - dizqueTV
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/dizquetv/README.md

@@ -1,6 +1,6 @@
 # dizquetv
 
-![Version: 2.4.0](https://img.shields.io/badge/Version-2.4.0-informational?style=flat-square) ![AppVersion: 1.3.0](https://img.shields.io/badge/AppVersion-1.3.0-informational?style=flat-square)
+![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 1.4.3](https://img.shields.io/badge/AppVersion-1.4.3-informational?style=flat-square)
 
 Create live TV channel streams from media on your Plex servers.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,16 +76,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"vexorian/dizquetv"` |  |
-| image.tag | string | `"1.3.0"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/home/node/app/.dizquetv"` |  |
-| service.port.port | int | `8000` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [dizquetv documentation](https://hub.docker.com/r/vexorian/dizquetv). |
+| env.PGID | int | `1001` | Specify the group ID the application will run as |
+| env.PUID | int | `1001` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"vexorian/dizquetv"` | image repository |
+| image.tag | string | `"1.4.3"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -93,21 +93,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [3.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `1.4.3`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[3.0.0]: #300
 
 ## Support
 

charts/stable/dizquetv/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [3.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `1.4.3`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[3.0.0]: #300
 {{- end -}}

charts/stable/dizquetv/values.yaml

@@ -6,28 +6,40 @@
 #
 
 image:
+  # -- image repository
   repository: vexorian/dizquetv
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: 1.3.0
+  # -- image tag
+  tag: 1.4.3
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
-  # PUID: 1001
-  # PGID: 1001
+# -- environment variables. See more environment variables in the [dizquetv documentation](https://hub.docker.com/r/vexorian/dizquetv).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+   # -- Specify the user ID the application will run as
+  PUID: 1001
+  # -- Specify the group ID the application will run as
+  PGID: 1001
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8000
+  main:
+    ports:
+      http:
+        port: 8000
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /home/node/app/.dizquetv

charts/stable/duplicati/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: Store securely encrypted backups on cloud storage services!
 name: duplicati
-version: 3.1.0
+version: 4.0.0
 keywords:
   - duplicati
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/duplicati
@@ -16,4 +16,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://library-charts.k8s-at-home.com
-    version: 2.5.0
+    version: 3.0.2

charts/stable/duplicati/README.md

@@ -1,6 +1,6 @@
 # duplicati
 
-![Version: 3.1.0](https://img.shields.io/badge/Version-3.1.0-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
+![Version: 4.0.0](https://img.shields.io/badge/Version-4.0.0-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
 
 Store securely encrypted backups on cloud storage services!
 
@@ -17,7 +17,7 @@ Store securely encrypted backups on cloud storage services!
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -79,22 +79,15 @@ If you get `Error: rendered manifests contain a resource that already exists. Un
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/duplicati"` |  |
-| image.tag | string | `"latest"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.backups.emptyDir.enabled | bool | `false` |  |
-| persistence.backups.enabled | bool | `false` |  |
-| persistence.backups.mountPath | string | `"/backups"` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/config"` |  |
-| persistence.source.emptyDir.enabled | bool | `false` |  |
-| persistence.source.enabled | bool | `false` |  |
-| persistence.source.mountPath | string | `"/source"` |  |
-| service.port.port | int | `8200` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env.PGID | string | `"1000"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1000"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/linuxserver/duplicati"` | image repository |
+| image.tag | string | `"latest"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -102,6 +95,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+
 ### [3.0.0]
 
 #### Added
@@ -113,6 +113,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - **BREAKING** Migrate to the common library, a lot of configuration has changed.
 - Updated icon.
 - Changed image tag to latest
+- Changed repository to `ghcr.io/linuxserver/duplicati`
 
 #### Removed
 
@@ -132,8 +133,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.0.0]: #3.0.0
-[2.1.1]: #2.1.1
+[4.0.0]: #400
+[3.0.0]: #300
+[2.1.1]: #211
 
 ## Support
 

charts/stable/duplicati/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+
 ### [3.0.0]
 
 #### Added
@@ -20,6 +27,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - **BREAKING** Migrate to the common library, a lot of configuration has changed.
 - Updated icon.
 - Changed image tag to latest
+- Changed repository to `ghcr.io/linuxserver/duplicati`
 
 #### Removed
 
@@ -39,6 +47,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.0.0]: #3.0.0
-[2.1.1]: #2.1.1
+[4.0.0]: #400
+[3.0.0]: #300
+[2.1.1]: #211
 {{- end -}}

charts/stable/duplicati/values.yaml

@@ -6,38 +6,43 @@
 #
 
 image:
-  repository: linuxserver/duplicati
+  # -- image repository
+  repository: ghcr.io/linuxserver/duplicati
+  # -- image tag
   tag: latest
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-# See more environment variables in the duplicati documentation
-# https://hub.docker.com/r/linuxserver/duplicati
-env: {}
-  # TZ:
+# See more environment variables in the [duplicati documentation](https://github.com/linuxserver/docker-duplicati#parameters)
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1000"
+  # -- Specify the group ID the application will run as
+  PGID: "1000"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8200
+  main:
+    ports:
+      http:
+        port: 8200
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /config
   source:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /source
   backups:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /backups

charts/stable/emby/README.md

@@ -76,7 +76,8 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{"TZ":"UTC"}` | environment variables. See more environment variables in the [emby documentation](https://emby.org/docs) |
+| env | object | See below | environment variables. See more environment variables in the [emby documentation](https://emby.org/docs) |
+| env.TZ | string | `"UTC"` | Set the container timezone |
 | image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
 | image.repository | string | `"ghcr.io/k8s-at-home/emby"` | image repository |
 | image.tag | string | `"v4.6.1.0"` | image tag |

charts/stable/esphome/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 1.16.2
+appVersion: 1.18.0
 description: ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
 name: esphome
-version: 6.5.0
+version: 7.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - esphome
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/esphome/README.md

@@ -1,6 +1,6 @@
 # esphome
 
-![Version: 6.5.0](https://img.shields.io/badge/Version-6.5.0-informational?style=flat-square) ![AppVersion: 1.16.2](https://img.shields.io/badge/AppVersion-1.16.2-informational?style=flat-square)
+![Version: 7.0.0](https://img.shields.io/badge/Version-7.0.0-informational?style=flat-square) ![AppVersion: 1.18.0](https://img.shields.io/badge/AppVersion-1.18.0-informational?style=flat-square)
 
 ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -75,15 +75,13 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"esphome/esphome"` |  |
-| image.tag | string | `"1.16.2"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.port.port | int | `6052` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"esphome/esphome"` | image repository |
+| image.tag | string | `"1.18.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -91,6 +89,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [7.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `1.18.0`.
+
 ### [6.4.2]
 
 #### Added
@@ -119,6 +125,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[7.0.0]: #700
 [6.4.2]: #642
 [1.0.0]: #100
 

charts/stable/esphome/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [7.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `1.18.0`.
+
 ### [6.4.2]
 
 #### Added
@@ -37,6 +45,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[7.0.0]: #700
 [6.4.2]: #642
 [1.0.0]: #100
 {{- end -}}

charts/stable/esphome/values.yaml

@@ -6,13 +6,15 @@
 #
 
 image:
+  # -- image repository
   repository: esphome/esphome
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: 1.16.2
-
-strategy:
-  type: Recreate
+  # -- image tag
+  tag: 1.18.0
 
+# -- environment variables.
+# @default -- See below
 env: {}
   # ESPHOME_DASHBOARD_USE_PING: true
   # ESPHOME_DASHBOARD_RELATIVE_URL: "/"
@@ -22,27 +24,22 @@ env: {}
   # USERNAME:
   # PASSWORD:
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 6052
+  main:
+    ports:
+      http:
+        port: 6052
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""

charts/stable/flaresolverr/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v1.2.3
+appVersion: v1.2.8
 description: FlareSolverr is a proxy server to bypass Cloudflare protection
 name: flaresolverr
-version: 3.4.0
+version: 4.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - flaresolverr
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/flaresolverr/README.md

@@ -1,6 +1,6 @@
 # flaresolverr
 
-![Version: 3.4.0](https://img.shields.io/badge/Version-3.4.0-informational?style=flat-square) ![AppVersion: v1.2.3](https://img.shields.io/badge/AppVersion-v1.2.3-informational?style=flat-square)
+![Version: 4.0.0](https://img.shields.io/badge/Version-4.0.0-informational?style=flat-square) ![AppVersion: v1.2.8](https://img.shields.io/badge/AppVersion-v1.2.8-informational?style=flat-square)
 
 FlareSolverr is a proxy server to bypass Cloudflare protection
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,13 +76,13 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"flaresolverr/flaresolverr"` |  |
-| image.tag | string | `"v1.2.3"` |  |
-| ingress.enabled | bool | `false` |  |
-| service.port.port | int | `8191` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [flaresolverr documentation](https://github.com/FlareSolverr/FlareSolverr#environment-variables). |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/flaresolverr/flaresolverr"` | image repository |
+| image.tag | string | `"v1.2.8"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -90,6 +90,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v1.2.8`.
+- Changed image repository to `ghcr.io/flaresolverr/flaresolverr`.
+
 ### [3.3.2]
 
 #### Added
@@ -118,8 +127,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.3.2]: #3.3.2
-[1.0.0]: #1.0.0
+[4.0.0]: #400
+[3.3.2]: #332
+[1.0.0]: #100
 
 ## Support
 

charts/stable/flaresolverr/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v1.2.8`.
+- Changed image repository to `ghcr.io/flaresolverr/flaresolverr`.
+
 ### [3.3.2]
 
 #### Added
@@ -37,6 +46,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.3.2]: #3.3.2
-[1.0.0]: #1.0.0
+[4.0.0]: #400
+[3.3.2]: #332
+[1.0.0]: #100
 {{- end -}}

charts/stable/flaresolverr/values.yaml

@@ -6,19 +6,29 @@
 #
 
 image:
-  repository: flaresolverr/flaresolverr
+  # -- image repository
+  repository: ghcr.io/flaresolverr/flaresolverr
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v1.2.3
+  # -- image tag
+  tag: v1.2.8
 
-strategy:
-  type: Recreate
-
-env: {}
-  # LOG_LEVEL: UTC
+# -- environment variables. See more environment variables in the [flaresolverr documentation](https://github.com/FlareSolverr/FlareSolverr#environment-variables).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8191
+  main:
+    ports:
+      http:
+        port: 8191
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false

charts/stable/flood/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 4.1.1
+appVersion: 4.6.0
 description: Flood is a monitoring service for various torrent clients
 name: flood
-version: 4.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - flood
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/flood/README.md

@@ -1,6 +1,6 @@
 # flood
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: 4.1.1](https://img.shields.io/badge/AppVersion-4.1.1-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 4.6.0](https://img.shields.io/badge/AppVersion-4.6.0-informational?style=flat-square)
 
 Flood is a monitoring service for various torrent clients
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,16 +76,14 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env.FLOOD_OPTION_RUNDIR | string | `"/data"` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"jesec/flood"` |  |
-| image.tag | string | `"4.1.1"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/data"` |  |
-| service.port.port | int | `3000` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [flood documentation] (https://github.com/jesec/flood/blob/v4.6.0/config.ts) Note: The environmental variables are not case sensitive (e.g. FLOOD_OPTION_port=FLOOD_OPTION_PORT). |
+| env.FLOOD_OPTION_RUNDIR | string | `"/data"` | Where to store Flood's runtime files (eg. database) |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"jesec/flood"` | image repository |
+| image.tag | string | `"4.6.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -93,21 +91,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `4.6.0`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 
 ## Support
 

charts/stable/flood/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `4.6.0`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 {{- end -}}

charts/stable/flood/ci/ct-values.yaml

@@ -1,6 +1,5 @@
 persistence:
   data:
     enabled: true
-    emptyDir:
-      enabled: true
-    mountPath: /data
+    accessMode: ReadWriteOnce
+    size: 1Gi

charts/stable/flood/values.yaml

@@ -6,40 +6,36 @@
 #
 
 image:
+  # -- image repository
   repository: jesec/flood
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: 4.1.1
+  # -- image tag
+  tag: 4.6.0
 
-strategy:
-  type: Recreate
-
-# Other environment variables that can be configure can be seen at
-# https://github.com/jesec/flood/blob/master/config.cli.js
+# -- environment variables. See more environment variables in the [flood documentation] (https://github.com/jesec/flood/blob/v4.6.0/config.ts)
+# Note: The environmental variables are not case sensitive (e.g. FLOOD_OPTION_port=FLOOD_OPTION_PORT).
+# @default -- See below
 env:
+  # -- Where to store Flood's runtime files (eg. database)
   FLOOD_OPTION_RUNDIR: /data
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 3000
+  main:
+    ports:
+      http:
+        port: 3000
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   data:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /data
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""

charts/stable/focalboard/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 0.6.5
+appVersion: 0.6.7
 description: Focalboard is an open source, self-hosted alternative to Trello, Notion, and Asana.
 name: focalboard
-version: 1.1.0
+version: 2.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - focalboard
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/focalboard/README.md

@@ -1,6 +1,6 @@
 # focalboard
 
-![Version: 1.1.0](https://img.shields.io/badge/Version-1.1.0-informational?style=flat-square) ![AppVersion: 0.6.5](https://img.shields.io/badge/AppVersion-0.6.5-informational?style=flat-square)
+![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: 0.6.7](https://img.shields.io/badge/AppVersion-0.6.7-informational?style=flat-square)
 
 Focalboard is an open source, self-hosted alternative to Trello, Notion, and Asana.
 
@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -77,16 +77,13 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"flipenergy/focalboard"` |  |
-| image.tag | string | `"0.6.5"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/data"` |  |
-| service.port.port | int | `8000` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [image entrypoint script](https://github.com/FlipEnergy/container-images/blob/main/focalboard/entrypoint.sh) |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"flipenergy/focalboard"` | image repository |
+| image.tag | string | `"0.6.7"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -94,6 +91,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [2.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `0.6.7`.
+
 ### [1.0.2]
 
 #### Added
@@ -136,9 +141,10 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[1.0.2]: #1.0.2
-[1.0.1]: #1.0.1
-[1.0.0]: #1.0.0
+[2.0.0]: #200
+[1.0.2]: #102
+[1.0.1]: #101
+[1.0.0]: #100
 
 ## Support
 

charts/stable/focalboard/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [2.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `0.6.7`.
+
 ### [1.0.2]
 
 #### Added
@@ -51,7 +59,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[1.0.2]: #1.0.2
-[1.0.1]: #1.0.1
-[1.0.0]: #1.0.0
+[2.0.0]: #200
+[1.0.2]: #102
+[1.0.1]: #101
+[1.0.0]: #100
 {{- end -}}

charts/stable/focalboard/values.yaml

@@ -6,30 +6,36 @@
 #
 
 image:
+  # -- image repository
   repository: flipenergy/focalboard
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: 0.6.5
+  # -- image tag
+  tag: 0.6.7
 
-# See more environment variables in the image entrypoint script
-# https://github.com/FlipEnergy/container-images/blob/main/focalboard/entrypoint.sh
+# -- environment variables. See more environment variables in the [image entrypoint script](https://github.com/FlipEnergy/container-images/blob/main/focalboard/entrypoint.sh)
+# @default -- See below
 env: {}
   # SERVER_ROOT:
   # DBTYPE:
   # DBCONFIG:
 
-strategy:
-  type: Recreate
-
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8000
+  main:
+    ports:
+      http:
+        port: 8000
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   data:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /data

charts/stable/freshrss/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 1.17.0
+appVersion: 1.18.1
 description: FreshRSS is a self-hosted RSS feed aggregator
 name: freshrss
-version: 4.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - freshrss
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/freshrss/README.md

@@ -1,6 +1,6 @@
 # freshrss
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: 1.17.0](https://img.shields.io/badge/AppVersion-1.17.0-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 1.18.1](https://img.shields.io/badge/AppVersion-1.18.1-informational?style=flat-square)
 
 FreshRSS is a self-hosted RSS feed aggregator
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,15 +76,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/freshrss"` |  |
-| image.tag | string | `"version-1.17.0"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [freshrss documentation](https://github.com/linuxserver/docker-freshrss#parameters). |
+| env.PGID | string | `"1001"` | Set the container group id |
+| env.PUID | string | `"1001"` | Set the container user id |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/freshrss"` | image repository |
+| image.tag | string | `"version-1.18.1"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -92,6 +93,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-1.18.1`.
+
 ### [4.3.2]
 
 #### Added
@@ -120,8 +129,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[4.3.2]: #4.3.2
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.3.2]: #432
+[1.0.0]: #100
 
 ## Support
 

charts/stable/freshrss/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-1.18.1`.
+
 ### [4.3.2]
 
 #### Added
@@ -37,6 +45,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[4.3.2]: #4.3.2
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.3.2]: #432
+[1.0.0]: #100
 {{- end -}}

charts/stable/freshrss/values.yaml

@@ -6,27 +6,39 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/freshrss
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: version-1.17.0
+  # -- image tag
+  tag: version-1.18.1
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
-  # PUID: 1001
-  # PGID: 1001
+# -- environment variables. See more environment variables in the [freshrss documentation](https://github.com/linuxserver/docker-freshrss#parameters).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Set the container user id
+  PUID: "1001"
+  # -- Set the container group id
+  PGID: "1001"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
+  main:
+    ports:
+      http:
+        port: 80
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false

charts/stable/gaps/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: Gaps searches through your Plex Server or local folders for all movies, then queries for known movies in the same collection.
 name: gaps
-version: 3.4.0
+version: 4.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - plex
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/gaps/README.md

@@ -1,6 +1,6 @@
 # gaps
 
-![Version: 3.4.0](https://img.shields.io/badge/Version-3.4.0-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
+![Version: 4.0.0](https://img.shields.io/badge/Version-4.0.0-informational?style=flat-square) ![AppVersion: latest](https://img.shields.io/badge/AppVersion-latest-informational?style=flat-square)
 
 Gaps searches through your Plex Server or local folders for all movies, then queries for known movies in the same collection.
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -75,16 +75,14 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"housewrecker/gaps"` |  |
-| image.tag | string | `"latest"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/usr/data"` |  |
-| service.port.port | int | `8484` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"housewrecker/gaps"` | image repository |
+| image.tag | string | `"latest"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -92,21 +90,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [4.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[4.0.0]: #400
 
 ## Support
 

charts/stable/gaps/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [4.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[4.0.0]: #400
 {{- end -}}

charts/stable/gaps/values.yaml

@@ -6,26 +6,36 @@
 #
 
 image:
+  # -- image repository
   repository: housewrecker/gaps
+  # -- image pull policy
   pullPolicy: IfNotPresent
+  # -- image tag
   tag: latest
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
+# -- environment variables.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8484
+  main:
+    ports:
+      http:
+        port: 8484
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   data:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /usr/data

charts/stable/gonic/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v0.12.0
+appVersion: v0.13.1
 description: Music streaming server / subsonic server API implementation
 name: gonic
-version: 4.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - music
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/gonic/README.md

@@ -1,6 +1,6 @@
 # gonic
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: v0.12.0](https://img.shields.io/badge/AppVersion-v0.12.0-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v0.13.1](https://img.shields.io/badge/AppVersion-v0.13.1-informational?style=flat-square)
 
 Music streaming server / subsonic server API implementation
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,22 +76,14 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"sentriz/gonic"` |  |
-| image.tag | string | `"v0.12.0"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.cache.emptyDir.enabled | bool | `false` |  |
-| persistence.cache.enabled | bool | `false` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.music.emptyDir.enabled | bool | `false` |  |
-| persistence.music.enabled | bool | `false` |  |
-| persistence.music.mountPath | string | `"/music"` |  |
-| persistence.podcasts.emptyDir.enabled | bool | `false` |  |
-| persistence.podcasts.enabled | bool | `false` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [gonic documentation](https://github.com/sentriz/gonic#configuration-options) |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"sentriz/gonic"` | image repository |
+| image.tag | string | `"v0.13.1"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -99,21 +91,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v0.13.1`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 
 ## Support
 

charts/stable/gonic/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v0.13.1`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[5.0.0]: #500
 {{- end -}}

charts/stable/gonic/ci/ct-values.yaml

@@ -5,21 +5,17 @@ env:
 persistence:
   data:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /data
   podcasts:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /podcasts
   cache:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /cache
   music:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /music

charts/stable/gonic/values.yaml

@@ -6,58 +6,44 @@
 #
 
 image:
+  # -- image repository
   repository: sentriz/gonic
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v0.12.0
+  # -- image tag
+  tag: v0.13.1
 
-strategy:
-  type: Recreate
-
-# # See more environment variables in the gonic documentation
-# https://github.com/sentriz/gonic#configuration-options
-env: {}
-  # TZ:
+# -- environment variables. See more environment variables in the [gonic documentation](https://github.com/sentriz/gonic#configuration-options)
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
   # GONIC_MUSIC_PATH:
   # GONIC_PODCAST_PATH:
   # GONIC_CACHE_PATH:
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
+  main:
+    ports:
+      http:
+        port: 80
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   data:
     enabled: false
-    emptyDir:
-      enabled: false
-
   podcasts:
     enabled: false
-    emptyDir:
-      enabled: false
-
   cache:
     enabled: false
-    emptyDir:
-      enabled: false
-
   music:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /music
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""

charts/stable/grocy/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v2.7.1
+appVersion: v3.0.1
 description: ERP beyond your fridge - grocy is a web-based self-hosted groceries & household management solution for your home
 name: grocy
-version: 6.4.0
+version: 7.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - grocy
@@ -16,4 +16,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/grocy/README.md

@@ -1,6 +1,6 @@
 # grocy
 
-![Version: 6.4.0](https://img.shields.io/badge/Version-6.4.0-informational?style=flat-square) ![AppVersion: v2.7.1](https://img.shields.io/badge/AppVersion-v2.7.1-informational?style=flat-square)
+![Version: 7.0.0](https://img.shields.io/badge/Version-7.0.0-informational?style=flat-square) ![AppVersion: v3.0.1](https://img.shields.io/badge/AppVersion-v3.0.1-informational?style=flat-square)
 
 ERP beyond your fridge - grocy is a web-based self-hosted groceries & household management solution for your home
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -75,15 +75,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/grocy"` |  |
-| image.tag | string | `"version-v2.7.1"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [grocy documentation](https://github.com/linuxserver/docker-grocy#parameters). |
+| env.PGID | string | `"1000"` | Set the container group id |
+| env.PUID | string | `"1000"` | Set the container user id |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/grocy"` | image repository |
+| image.tag | string | `"version-v3.0.1"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -91,21 +92,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v3.0.1`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 
 ## Support
 

charts/stable/grocy/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,13 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v3.0.1`.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 {{- end -}}

charts/stable/grocy/values.yaml

@@ -6,27 +6,39 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/grocy
-  tag: version-v2.7.1
+  # -- image tag
+  tag: version-v3.0.1
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
-  # PUID:
-  # PGID:
+# -- environment variables. See more environment variables in the [grocy documentation](https://github.com/linuxserver/docker-grocy#parameters).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Set the container user id
+  PUID: "1000"
+  # -- Set the container group id
+  PGID: "1000"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
+  main:
+    ports:
+      http:
+        port: 80
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false

charts/stable/heimdall/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 2.2.2
 description: An Application dashboard and launcher
 name: heimdall
-version: 6.4.0
+version: 7.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - heimdall
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/heimdall/README.md

@@ -1,6 +1,6 @@
 # heimdall
 
-![Version: 6.4.0](https://img.shields.io/badge/Version-6.4.0-informational?style=flat-square) ![AppVersion: 2.2.2](https://img.shields.io/badge/AppVersion-2.2.2-informational?style=flat-square)
+![Version: 7.0.0](https://img.shields.io/badge/Version-7.0.0-informational?style=flat-square) ![AppVersion: 2.2.2](https://img.shields.io/badge/AppVersion-2.2.2-informational?style=flat-square)
 
 An Application dashboard and launcher
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,16 +76,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/heimdall"` |  |
-| image.tag | string | `"version-2.2.2"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| probes.startup.enabled | bool | `true` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [heimdall documentation](https://github.com/linuxserver/docker-heimdall#parameters). |
+| env.PGID | string | `"1000"` | Set the container group id |
+| env.PUID | string | `"1000"` | Set the container user id |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/heimdall"` | image repository |
+| image.tag | string | `"version-2.2.2"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -93,21 +93,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 
 ## Support
 

charts/stable/heimdall/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [7.0.0]
 
 #### Changed
 
-- N/A
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
 
-#### Removed
-
-- N/A
-
-[1.0.0]: #1.0.0
+[7.0.0]: #700
 {{- end -}}

charts/stable/heimdall/values.yaml

@@ -6,31 +6,39 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/heimdall
+  # -- image tag
   tag: version-2.2.2
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
-  # PUID:
-  # PGID:
+# -- environment variables. See more environment variables in the [heimdall documentation](https://github.com/linuxserver/docker-heimdall#parameters).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Set the container user id
+  PUID: "1000"
+  # -- Set the container group id
+  PGID: "1000"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
+  main:
+    ports:
+      http:
+        port: 80
 
 ingress:
-  enabled: false
-
-probes:
-  startup:
-    enabled: true
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false

charts/stable/home-assistant/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 2021.6.3
 description: Home Assistant
 name: home-assistant
-version: 9.0.1
+version: 9.0.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - home-assistant

charts/stable/home-assistant/README.md

@@ -1,6 +1,6 @@
 # home-assistant
 
-![Version: 9.0.1](https://img.shields.io/badge/Version-9.0.1-informational?style=flat-square) ![AppVersion: 2021.6.3](https://img.shields.io/badge/AppVersion-2021.6.3-informational?style=flat-square)
+![Version: 9.0.2](https://img.shields.io/badge/Version-9.0.2-informational?style=flat-square) ![AppVersion: 2021.6.3](https://img.shields.io/badge/AppVersion-2021.6.3-informational?style=flat-square)
 
 Home Assistant
 

charts/stable/home-assistant/templates/servicemonitor.yaml

@@ -13,7 +13,7 @@ spec:
     matchLabels:
       {{- include "common.labels.selectorLabels" . | nindent 6 }}
   endpoints:
-  - port: {{ default "http" .Values.service.port.name }}
+  - port: {{ .Values.prometheus.serviceMonitor.portName }}
     {{- with .Values.prometheus.serviceMonitor.interval }}
     interval: {{ . }}
     {{- end }}

charts/stable/home-assistant/values.yaml

@@ -48,6 +48,7 @@ prometheus:
   # @default -- See values.yaml
   serviceMonitor:
     enabled: false
+    portName: http
     ## See https://www.home-assistant.io/docs/authentication/ for where to find
     ## long lived access token creation under your account profile, which is
     ## needed to monitor Home Assistant

charts/stable/jellyfin/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 10.7.0
+appVersion: 10.7.5
 description: Jellyfin is a Free Software Media System
 name: jellyfin
-version: 7.4.0
+version: 8.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - jellyfin
@@ -19,4 +19,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/jellyfin/README.md

@@ -1,6 +1,6 @@
 # jellyfin
 
-![Version: 7.4.0](https://img.shields.io/badge/Version-7.4.0-informational?style=flat-square) ![AppVersion: 10.7.0](https://img.shields.io/badge/AppVersion-10.7.0-informational?style=flat-square)
+![Version: 8.0.0](https://img.shields.io/badge/Version-8.0.0-informational?style=flat-square) ![AppVersion: 10.7.5](https://img.shields.io/badge/AppVersion-10.7.5-informational?style=flat-square)
 
 Jellyfin is a Free Software Media System
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,20 +76,15 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"jellyfin/jellyfin"` |  |
-| image.tag | string | `"10.7.0"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.cache.emptyDir.enabled | bool | `false` |  |
-| persistence.cache.enabled | bool | `false` |  |
-| persistence.cache.mountPath | string | `"/cache"` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.media.emptyDir.enabled | bool | `false` |  |
-| persistence.media.enabled | bool | `false` |  |
-| persistence.media.mountPath | string | `"/media"` |  |
-| service.port.port | int | `8096` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See [image docs](https://jellyfin.org/docs/general/administration/configuration.html) for more details. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"jellyfin/jellyfin"` | image repository |
+| image.tag | string | `"10.7.5"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| podSecurityContext | object | `{}` | Configure the Security Context for the Pod |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -97,6 +92,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [8.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `10.7.5`.
+
 ### [7.3.2]
 
 #### Added
@@ -149,6 +152,7 @@ Drop browser cache and cookies for your jellyfin URL!
 
 - Replaced LinuxServer.io image with official
 
+[8.0.0]: #8.0.0
 [7.3.2]: #7.3.2
 [6.0.0]: #6.0.0
 

charts/stable/jellyfin/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [8.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `10.7.5`.
+
 ### [7.3.2]
 
 #### Added
@@ -61,6 +69,7 @@ Drop browser cache and cookies for your jellyfin URL!
 
 - Replaced LinuxServer.io image with official
 
+[8.0.0]: #8.0.0
 [7.3.2]: #7.3.2
 [6.0.0]: #6.0.0
 {{- end -}}

charts/stable/jellyfin/values.yaml

@@ -6,64 +6,50 @@
 #
 
 image:
+  # -- image repository
   repository: jellyfin/jellyfin
+  # -- image tag
+  tag: 10.7.5
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: 10.7.0
 
-strategy:
-  type: Recreate
+# -- environment variables. See [image docs](https://jellyfin.org/docs/general/administration/configuration.html) for more details.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8096
+  main:
+    ports:
+      http:
+        port: 8096
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
 
   # Cache does NOT contain temporary transcoding data.
   cache:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /cache
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
   media:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /media
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
-# podSecurityContext:
+# -- Configure the Security Context for the Pod
+podSecurityContext: {}
 #   runAsUser: 568
 #   runAsGroup: 568
 #   fsGroup: 568

charts/stable/leaf2mqtt/README.md

@@ -1,6 +1,6 @@
 # leaf2mqtt
 
-![Version: 1.3.0](https://img.shields.io/badge/Version-1.3.0-informational?style=flat-square) ![AppVersion: 0.1](https://img.shields.io/badge/AppVersion-0.1-informational?style=flat-square)
+![Version: 1.0.0](https://img.shields.io/badge/Version-1.0.0-informational?style=flat-square) ![AppVersion: 0.1](https://img.shields.io/badge/AppVersion-0.1-informational?style=flat-square)
 
 Nissan Leaf connected services to MQTT adapter
 
@@ -79,7 +79,10 @@ N/A
 | env | object | `{}` |  |
 | image.pullPolicy | string | `"IfNotPresent"` | Image pull policy |
 | image.repository | string | `"ghcr.io/k8s-at-home/leaf2mqtt"` | Image repository |
-| image.tag | float | `0.1` | Image tag |
+| image.tag | string | `"v0.1"` | Image tag |
+| probes.liveness.enabled | bool | `false` |  |
+| probes.readiness.enabled | bool | `false` |  |
+| probes.startup.enabled | bool | `false` |  |
 | service.enabled | bool | `false` |  |
 | strategy.type | string | `"Recreate"` | Deployment recreation strategy |
 

charts/stable/mosquitto/README.md

@@ -1,6 +1,6 @@
 # mosquitto
 
-![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 2.0.11](https://img.shields.io/badge/AppVersion-2.0.11-informational?style=flat-square)
+![Version: 3.0.1](https://img.shields.io/badge/Version-3.0.1-informational?style=flat-square) ![AppVersion: 2.0.11](https://img.shields.io/badge/AppVersion-2.0.11-informational?style=flat-square)
 
 Eclipse Mosquitto - An open source MQTT broker
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/nzbget/README.md

@@ -1,6 +1,6 @@
 # nzbget
 
-![Version: 11.0.0](https://img.shields.io/badge/Version-11.0.0-informational?style=flat-square) ![AppVersion: v21.0](https://img.shields.io/badge/AppVersion-v21.0-informational?style=flat-square)
+![Version: 11.0.0](https://img.shields.io/badge/Version-11.0.0-informational?style=flat-square) ![AppVersion: v21.1](https://img.shields.io/badge/AppVersion-v21.1-informational?style=flat-square)
 
 NZBGet is a Usenet downloader client
 

charts/stable/openemr/README.md

@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 | Repository | Name | Version |
 |------------|------|---------|
 | https://charts.bitnami.com/bitnami | mariadb | 9.3.13 |
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/photoprism/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: "20201122"
+appVersion: "20210523"
 description: PhotoPrism® is a server-based application for browsing, organizing and sharing your personal photo collection
 name: photoprism
-version: 4.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - photos
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/photoprism/README.md

@@ -1,6 +1,6 @@
 # photoprism
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: 20201122](https://img.shields.io/badge/AppVersion-20201122-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 20210523](https://img.shields.io/badge/AppVersion-20210523-informational?style=flat-square)
 
 PhotoPrism® is a server-based application for browsing, organizing and sharing your personal photo collection
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,20 +76,21 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env.PHOTOPRISM_ORIGINALS_PATH | string | `"/photoprism/originals"` |  |
-| env.PHOTOPRISM_STORAGE_PATH | string | `"/photoprism/storage"` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"photoprism/photoprism"` |  |
-| image.tag | string | `"20201122"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/photoprism/storage"` |  |
-| persistence.originals.emptyDir.enabled | bool | `false` |  |
-| persistence.originals.enabled | bool | `false` |  |
-| persistence.originals.mountPath | string | `"/photoprism/originals"` |  |
-| service.port.port | int | `2342` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See [image docs](https://docs.photoprism.org/getting-started/config-options/) for more details. |
+| env.GID | string | `nil` | Sets GID Photoprism runs under. |
+| env.PHOTOPRISM_ADMIN_PASSWORD | string | `"please-change"` | Initial admin password. **BE SURE TO CHANGE THIS!** |
+| env.PHOTOPRISM_ORIGINALS_PATH | string | `"/photoprism/originals"` | Photoprism originals path |
+| env.PHOTOPRISM_PUBLIC | string | `"false"` | Disable authentication / password protection |
+| env.PHOTOPRISM_STORAGE_PATH | string | `"/photoprism/storage"` | Photoprism storage path |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| env.UID | string | `nil` | Sets UID Photoprism runs under. |
+| env.UMASK | string | `nil` | Sets UMASK. |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"photoprism/photoprism"` | image repository |
+| image.tag | string | `"20210523"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -97,6 +98,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `20210523`.
+
 ### [1.0.0]
 
 #### Added

charts/stable/photoprism/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,14 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `20210523`.
+
 ### [1.0.0]
 
 #### Added

charts/stable/photoprism/values.yaml

@@ -6,58 +6,54 @@
 #
 
 image:
+  # -- image repository
   repository: photoprism/photoprism
+  # -- image tag
+  tag: "20210523"
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: "20201122"
-
-strategy:
-  type: Recreate
 
+# -- environment variables. See [image docs](https://docs.photoprism.org/getting-started/config-options/) for more details.
+# @default -- See below
 env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Photoprism storage path
   PHOTOPRISM_STORAGE_PATH: /photoprism/storage
+  # -- Photoprism originals path
   PHOTOPRISM_ORIGINALS_PATH: /photoprism/originals
-  ## See other config options from PhotoPrism documentation: https://docs.photoprism.org/getting-started/config-options/
-  # PHOTOPRISM_ADMIN_PASSWORD: "please-change"     # Initial admin password: PLEASE CHANGE!
-  # PHOTOPRISM_DEBUG: "false"                      # Run in debug mode (shows additional log messages)
-  # PHOTOPRISM_PUBLIC: "false"                     # No authentication required (disables password protection)
-  # PHOTOPRISM_READONLY: "false"                   # Don't modify originals directory (reduced functionality)
-  # PHOTOPRISM_EXPERIMENTAL: "false"               # Enable experimental features
-  # PHOTOPRISM_SITE_URL: "http://localhost:2342/"  # Canonical / public site URL
-  # PHOTOPRISM_SITE_TITLE: "PhotoPrism"
-  # PHOTOPRISM_SITE_CAPTION: "Browse Your Life"
-  # PHOTOPRISM_SITE_DESCRIPTION: ""
-  # PHOTOPRISM_SITE_AUTHOR: ""
-  # # You may optionally set user, group and/or file permissions using environment variables:
-  # UID: 1000
-  # GID: 1000
-  # UMASK: 0000
+  # -- Initial admin password. **BE SURE TO CHANGE THIS!**
+  PHOTOPRISM_ADMIN_PASSWORD: "please-change"
+  # -- Disable authentication / password protection
+  PHOTOPRISM_PUBLIC: "false"
+  # -- Sets UID Photoprism runs under.
+  UID:  # 1000
+  # -- Sets GID Photoprism runs under.
+  GID:  # 1000
+  # -- Sets UMASK.
+  UMASK:  # 0000
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 2342
+  main:
+    ports:
+      http:
+        port: 2342
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /photoprism/storage
 
   originals:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: "/photoprism/originals"
-    # readOnly: true
-
-  # additionalVolumeMounts:
-  # - name: originals
-  #   mountPath: "/photoprism/originals"
-  #   readOnly: true
-  # additionalVolumes:
-  # - name: originals
-  #   persistentVolumeClaim:
-  #     claimName: nfs-pictures-pvc

charts/stable/plex/README.md

@@ -1,6 +1,6 @@
 # plex
 
-![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v1.23.2.4656-85f0adf5b](https://img.shields.io/badge/AppVersion-v1.23.2.4656--85f0adf5b-informational?style=flat-square)
+![Version: 5.0.1](https://img.shields.io/badge/Version-5.0.1-informational?style=flat-square) ![AppVersion: v1.23.2.4656-85f0adf5b](https://img.shields.io/badge/AppVersion-v1.23.2.4656--85f0adf5b-informational?style=flat-square)
 
 Plex Media Server
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/pod-gateway/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.2.6
 description: Admision controller to change the default gateway and DNS server of PODs
 name: pod-gateway
-version: 3.0.1
+version: 3.0.2
 kubeVersion: ">=1.16.0-0"
 keywords:
 - pod-gateway

charts/stable/pod-gateway/README.md

@@ -1,6 +1,6 @@
 # pod-gateway
 
-![Version: 3.0.1](https://img.shields.io/badge/Version-3.0.1-informational?style=flat-square) ![AppVersion: 1.2.6](https://img.shields.io/badge/AppVersion-1.2.6-informational?style=flat-square)
+![Version: 3.0.2](https://img.shields.io/badge/Version-3.0.2-informational?style=flat-square) ![AppVersion: 1.2.6](https://img.shields.io/badge/AppVersion-1.2.6-informational?style=flat-square)
 
 Admision controller to change the default gateway and DNS server of PODs
 
@@ -143,6 +143,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.2]
+
+#### Fixed
+
+- ClusterIP must be none - fixed service definition
+
 ### [3.0.1]
 
 #### Fixed

charts/stable/pod-gateway/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.2]
+
+#### Fixed
+
+- ClusterIP must be none - fixed service definition
+
 ### [3.0.1]
 
 #### Fixed

charts/stable/pod-gateway/templates/common.yaml

@@ -55,10 +55,10 @@ probes:
 
 service:
   main:
+    type: ClusterIP
+    clusterIP: None
     ports:
       http:
-        type: ClusterIP
-        clusterIP: None
         port: 4789
         protocol: UDP
 

charts/stable/qbittorrent/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v4.3.4.1
+appVersion: v4.3.5
 description: qBittorrent is a cross-platform free and open-source BitTorrent client
 name: qbittorrent
-version: 10.1.0
+version: 11.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - qbittorrent
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 3.0.2

charts/stable/qbittorrent/README.md

@@ -1,6 +1,6 @@
 # qbittorrent
 
-![Version: 10.1.0](https://img.shields.io/badge/Version-10.1.0-informational?style=flat-square) ![AppVersion: v4.3.4.1](https://img.shields.io/badge/AppVersion-v4.3.4.1-informational?style=flat-square)
+![Version: 11.0.0](https://img.shields.io/badge/Version-11.0.0-informational?style=flat-square) ![AppVersion: v4.3.5](https://img.shields.io/badge/AppVersion-v4.3.5-informational?style=flat-square)
 
 qBittorrent is a cross-platform free and open-source BitTorrent client
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 
@@ -76,32 +76,15 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| additionalVolumeMounts[0].mountPath | string | `"/config/custom-cont-init.d"` |  |
-| additionalVolumeMounts[0].name | string | `"qbittorrent-scripts"` |  |
-| additionalVolumes[0].emptyDir | object | `{}` |  |
-| additionalVolumes[0].name | string | `"qbittorrent-scripts"` |  |
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"ghcr.io/k8s-at-home/qbittorrent"` |  |
-| image.tag | string | `"v4.3.4.1"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.downloads.emptyDir.enabled | bool | `false` |  |
-| persistence.downloads.enabled | bool | `false` |  |
-| persistence.downloads.mountPath | string | `"/downloads"` |  |
-| persistence.media.emptyDir.enabled | bool | `false` |  |
-| persistence.media.enabled | bool | `false` |  |
-| persistence.media.mountPath | string | `"/media"` |  |
-| service.additionalServices[0].enabled | bool | `true` |  |
-| service.additionalServices[0].nameSuffix | string | `"bittorrent"` |  |
-| service.additionalServices[0].port.name | string | `"bittorrent"` |  |
-| service.additionalServices[0].port.port | int | `6881` |  |
-| service.additionalServices[0].port.protocol | string | `"TCP"` |  |
-| service.additionalServices[0].port.targetPort | int | `6881` |  |
-| service.additionalServices[0].type | string | `"ClusterIP"` |  |
-| service.port.port | int | `8080` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See [image docs](https://docs.k8s-at-home.com/our-container-images/configuration/) for more details. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/k8s-at-home/qbittorrent"` | image repository |
+| image.tag | string | `"v4.3.5"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
+| settings.automaticPortSetup | bool | `false` | Enables automatic port configuration at startup This sets the qbittorrent port to the value of `service.bittorrent.ports.bittorrent.port`. |
 
 ## Changelog
 
@@ -109,6 +92,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [11.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v4.3.5`.
+- Move automatic port management at startup to `settings.automaticPortSetup`.
+
 ### [10.0.0]
 
 #### Changed

charts/stable/qbittorrent/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,15 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [11.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v4.3.5`.
+- Move automatic port management at startup to `settings.automaticPortSetup`.
+
 ### [10.0.0]
 
 #### Changed

charts/stable/qbittorrent/templates/common.yaml

@@ -1 +1,19 @@
+{{/* Make sure all variables are set properly */}}
+{{- include "common.values.setup" . }}
+
+{{/* Append the configMap volume to the volumes */}}
+{{- define "qbittorrent.configmapVolume" -}}
+enabled: "true"
+mountPath: "/config/custom-cont-init.d"
+type: "custom"
+volumeSpec:
+  configMap:
+    name: {{ include "common.names.fullname" . }}-scripts
+    defaultMode: 511
+{{- end -}}
+{{- if and .Values.settings.automaticPortSetup -}}
+  {{- $_ := set .Values.persistence "qbittorrent-scripts" (include "qbittorrent.configmapVolume" . | fromYaml) -}}
+{{- end -}}
+
+{{/* Render the templates */}}
 {{ include "common.all" . }}

charts/stable/qbittorrent/templates/configmap.yaml

@@ -5,14 +5,9 @@ metadata:
   labels:
     {{- include "common.labels" . | nindent 4 }}
 data:
-  {{- /* Determine if the bittorrent port is set somewhere */ -}}
-  {{- $bittorrentPort := "" -}}
-  {{- range $extraServices := .Values.service.additionalServices }}
-    {{- if and .enabled (eq "bittorrent" .nameSuffix) -}}
-      {{- $bittorrentPort = .port.port -}}
-    {{- end }}
-  {{- end }}
-  {{- if $bittorrentPort }}
+  {{- /* Determine if the bittorrent port is enabled */ -}}
+  {{- $bittorrentPort := .Values.service.bittorrent.ports.bittorrent.port -}}
+  {{- if and .Values.settings.automaticPortSetup $bittorrentPort }}
   31-update-port: |-
     #!/bin/bash
     QBITTORRENT_CONFIGFILE="/config/qBittorrent/qBittorrent.conf"

charts/stable/qbittorrent/values.yaml

@@ -6,82 +6,57 @@
 #
 
 image:
+  # -- image repository
   repository: ghcr.io/k8s-at-home/qbittorrent
+  # -- image tag
+  tag: v4.3.5
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v4.3.4.1
 
-strategy:
-  type: Recreate
+settings:
+  # -- Enables automatic port configuration at startup
+  # This sets the qbittorrent port to the value of `service.bittorrent.ports.bittorrent.port`.
+  automaticPortSetup: false
 
-env: {}
-  # TZ: UTC
+# -- environment variables. See [image docs](https://docs.k8s-at-home.com/our-container-images/configuration/) for more details.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8080
-  additionalServices:
-  - enabled: true
-    nameSuffix: bittorrent
+  main:
+    ports:
+      http:
+        port: 8080
+  bittorrent:
+    enabled: false
     type: ClusterIP
-    port:
-      port: 6881
-      name: bittorrent
-      protocol: TCP
-      targetPort: 6881
+    ports:
+      bittorrent:
+        enabled: true
+        port: 6881
+        protocol: TCP
+        targetPort: 6881
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
 
   media:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /media
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
   downloads:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /downloads
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
-
-additionalVolumes:
-  - name: qbittorrent-scripts
-    emptyDir: {}
-    ## When you want to enable automatic port configuration at startup, adjust this to:
-    # configMap:
-    #   name: <RELEASENAME>-scripts
-    #   defaultMode: 511
-
-additionalVolumeMounts:
-  - mountPath: /config/custom-cont-init.d
-    name: qbittorrent-scripts

charts/stable/reg/README.md

@@ -1,6 +1,6 @@
 # reg
 
-![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: 0.16.1](https://img.shields.io/badge/AppVersion-0.16.1-informational?style=flat-square)
+![Version: 2.0.1](https://img.shields.io/badge/Version-2.0.1-informational?style=flat-square) ![AppVersion: 0.16.1](https://img.shields.io/badge/AppVersion-0.16.1-informational?style=flat-square)
 
 Docker registry v2 command line client and repo listing generator with security checks.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR
 

charts/stable/shlink/README.md

@@ -1,6 +1,6 @@
 # shlink
 
-![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: 2.7.1](https://img.shields.io/badge/AppVersion-2.7.1-informational?style=flat-square)
+![Version: 2.0.1](https://img.shields.io/badge/Version-2.0.1-informational?style=flat-square) ![AppVersion: 2.7.1](https://img.shields.io/badge/AppVersion-2.7.1-informational?style=flat-square)
 
 A self-hosted and PHP-based URL shortener application with CLI and REST interfaces
 
@@ -20,7 +20,7 @@ Kubernetes: `>=1.16.0-0`
 |------------|------|---------|
 | https://charts.bitnami.com/bitnami | mariadb | 9.3.13 |
 | https://charts.bitnami.com/bitnami | postgresql | 10.4.8 |
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 3.0.2 |
 
 ## TL;DR