protonmail-bridge (#534)

* [frigate] Deprecate chart

* Fix linter stuff

* More CI fixes

* [frigate] Update

.github/stale.yml

@@ -1,18 +1,32 @@
-daysUntilStale: 60
-daysUntilClose: 7
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 45
+
+# Number of days of inactivity before a stale Issue or Pull Request is closed.
+daysUntilClose: 5
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
 exemptLabels:
+  - on-hold
   - pinned
-staleLabel: lifecycle/stale
-pulls:
-  markComment: >
-    This pull request has been automatically marked as stale because it has not had
-    recent activity. It will be closed if no further activity occurs. Thank you
-    for your contributions.
+
+# Label to use when marking as stale
+staleLabel: stale
+
 issues:
+  # Comment to post when marking as stale. Set to `false` to disable
   markComment: >
-    This issue request has been automatically marked as stale because it has not had
-    recent activity. It will be closed if no further activity occurs. Thank you
-    for your contributions.
-closeComment: false
-unmarkComment: >
-  /remove-lifecycle stale
+    This Issue has been automatically marked as "stale" because it has not had recent activity (for 45 days). It will be closed if no further activity occurs. Thanks for the feedback.
+  # Comment to post when closing a stale Issue or Pull Request.
+  closeComment: >
+    Due to the lack of activity in the last 5 days since it was marked as "stale", we proceed to close this Issue. Do not hesitate to reopen it later if necessary.
+pulls:
+  # Comment to post when marking as stale. Set to `false` to disable
+  markComment: >
+    This Pull Request has been automatically marked as "stale" because it has not had recent activity (for 45 days). It will be closed if no further activity occurs. Thank you for your contribution.
+  # Comment to post when closing a stale Issue or Pull Request.
+  closeComment: >
+    Due to the lack of activity in the last 5 days since it was marked as "stale", we proceed to close this Pull Request. Do not hesitate to reopen it later if necessary.
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30

.github/workflows/charts-lint-test.yaml

@@ -1,6 +1,6 @@
 name: "Charts: Lint and test"
 
-on: 
+on:
   pull_request:
     paths:
     - 'charts/**'
@@ -68,13 +68,13 @@ jobs:
       - name: Install Ruby
         uses: ruby/setup-ruby@v1
         with:
-          ruby-version: 2.7            
-  
+          ruby-version: 2.7
+
       - name: Install dependencies
         run: |
           export RUBYJQ_USE_SYSTEM_LIBRARIES=1
           bundle install
-      
+
       - name: Run tests
         run: |
           bundle exec m -r test/charts
@@ -105,7 +105,7 @@ jobs:
         if: needs.lint.outputs.changed == 'true' || needs.lint.outputs.common == 'true'
 
       - name: Run chart-testing (install)
-        run: ct install --config .github/ct.yaml
+        run: ct install --config .github/ct.yaml --excluded-charts ""
         if: needs.lint.outputs.changed == 'true'
 
       - name: Run chart-testing (common-test)

.gitignore

@@ -1,3 +1,6 @@
+# Developer dependencies
+.bin
+
 # IDE resources
 .vscode
 .idea
@@ -9,4 +12,5 @@ charts/*/charts
 
 # Other rsources
 .env
+.envrc
 Gemfile.lock

.taskfiles/Taskfile_chart.yml

@@ -0,0 +1,48 @@
+---
+version: '3'
+
+tasks:
+
+  create:
+    desc: create new chart
+    cmds:
+    - git checkout -b add-chart-{{.CHART}}
+    - cp -r {{.GIT_ROOT}}/templates/chart {{.GIT_ROOT}}/charts/{{.CHART}}
+    - ./.bin/go-replace -s '${CHARTNAME}' -r "{{.CHART}}" --path={{.GIT_ROOT}}/charts/{{.CHART}} --path-pattern='*.*'
+    - task: dependency
+    - echo "Congratulations, charts/{{.CHART}} successfully generated, you can now edit chart informations ( Chart.yaml and values.yaml )"
+    status:
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}
+    deps:
+    - check-chart
+    silent: true
+
+
+  dependency:
+    cmds:
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}/Chart.lock && rm {{.GIT_ROOT}}/charts/{{.CHART}}/Chart.lock || exit 0
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}/tmpcharts && rm -rf {{.GIT_ROOT}}/charts/{{.CHART}}/tmpcharts || exit 0
+    - cd {{.GIT_ROOT}}/charts/{{.CHART}} && helm dependency update
+    silent: true
+
+  lint:
+    desc: lint your chart code
+    cmds:
+    - cd {{.GIT_ROOT}}/charts/{{.CHART}} && helm lint
+    deps:
+    - dependency
+    - check-chart
+
+  test:
+    desc: test your chart code
+    cmds:
+    - docker run --rm -it --user $(id -u):$(id -g) -e "HELM_CONFIG_HOME=/tmp/helm" -e "HELM_CACHE_HOME=/tmp/helm" -v {{.GIT_ROOT}}:/ci -w /ci quay.io/helmpack/chart-testing:latest ct lint --charts charts/{{.CHART}} --config /ci/.github/ct.yaml
+    deps:
+    - check-chart
+    - lint
+
+  # Checks Parameters
+  check-chart:
+    cmds:
+    - cmd: test ! -z "{{.CHART}}" || (echo "Please define CHART parameter"; exit 1)
+    silent: true

.taskfiles/Taskfile_darwin.yml

@@ -0,0 +1,41 @@
+---
+version: '3'
+
+# Todo: add all darwin requirements
+
+env:
+  URL_GOREPLACE: https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-osx
+
+tasks:
+
+  install:
+    desc: Install all developer dependencies
+    deps:
+    - distrib-requirements
+    - go-replace
+
+  distrib-requirements:
+    desc: Check needed distribution packages
+    cmds:
+    - task deps:need BIN=wget
+    - task deps:need BIN=python3
+    - task deps:need BIN=docker
+    silent: true
+
+  need:
+    desc: Check needed binary is present
+    cmds:
+    - type {{.BIN}} 2>&1 >/dev/null || (echo "Please install {{.BIN}}"; exit 1)
+    silent: true
+
+  go-replace:
+    desc: Install go-replace
+    cmds:
+    - echo "Installing go-replace"
+    - mkdir -p ".bin"
+    - wget -q "https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-osx" -O .bin/go-replace && chmod +x .bin/go-replace
+    status:
+    - test -e .bin/go-replace
+    deps:
+    - distrib-requirements
+    silent: true

.taskfiles/Taskfile_linux.yml

@@ -0,0 +1,64 @@
+---
+version: '3'
+
+env:
+  URL_GOREPLACE: https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-linux
+  URL_HELM: https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3
+
+tasks:
+
+  install:
+    desc: Install all developer dependencies
+    deps:
+    - distrib-requirements
+    - helm
+    - pre-commit
+    - go-replace
+
+  distrib-requirements:
+    desc: Check needed distribution packages
+    cmds:
+    - task deps:need BIN=wget
+    - task deps:need BIN=python3
+    - task deps:need BIN=docker
+    silent: true
+
+  need:
+    desc: Check needed binary is present
+    cmds:
+    - type {{.BIN}} 2>&1 >/dev/null || (echo "Please install {{.BIN}}"; exit 1)
+    silent: true
+
+  helm:
+    desc: Install helm client
+    cmds:
+    - echo "Installing helm"
+    - wget -q -O - "$URL_HELM" | USE_SUDO=false HELM_INSTALL_DIR=.bin bash
+    status:
+    - test -e .bin/helm
+    deps:
+    - distrib-requirements
+    silent: true
+
+  pre-commit:
+    desc: Install a precommit pip package
+    cmds:
+    - echo "Installing pre-commit"
+    - python3 -m pip install --user pre-commit
+    status:
+    - type pre-commit
+    deps:
+    - distrib-requirements
+    silent: true
+
+  go-replace:
+    desc: Install go-replace
+    cmds:
+    - echo "Installing go-replace"
+    - mkdir -p ".bin"
+    - wget -q "$URL_GOREPLACE" -O .bin/go-replace && chmod +x .bin/go-replace
+    status:
+    - test -e .bin/go-replace
+    deps:
+    - distrib-requirements
+    silent: true

.taskfiles/Taskfile_windows.yml

@@ -0,0 +1,10 @@
+---
+version: '3'
+
+# Todo: add windows requirements
+
+tasks:
+  default:
+    cmds:
+    - task -l
+    silent: true

CONTRIBUTING.md

@@ -39,6 +39,23 @@ See `git help commit`:
 
 Once changes have been merged, the release job will automatically run to package and release changed charts.
 
+### Create new chart
+```
+# Clone
+git clone
+cd charts
+sh -c "$(curl --location https://taskfile.dev/install.sh)" -- -d -b .bin
+
+# Create chart
+PATH=$PATH:$PWD/.bin
+task chart:create CHART=chart_name
+# Don't forgot edit some chart informations in charts/char_name/Chart.yaml and charts/char_name/values.yaml
+
+# Lint & Test
+task chart:lint CHART=chart_name
+task chart:test CHART=chart_name
+```
+
 ### Immutability
 
 Chart releases must be immutable. Any change to a chart warrants a chart version bump even if it is only changed to the documentation.

Taskfile.yml

@@ -0,0 +1,16 @@
+---
+version: '3'
+
+vars:
+  GIT_ROOT:
+    sh: git rev-parse --show-toplevel
+
+includes:
+  deps: .taskfiles/Taskfile_{{OS}}.yml
+  chart: .taskfiles/Taskfile_chart.yml
+
+tasks:
+  default:
+    cmds:
+    - task -l
+    silent: true

charts/README.templates.md.gotmpl

@@ -14,7 +14,7 @@
     {{ template "repository.organization" . }}/{{ template "chart.name" . }}
 {{- end -}}
 {{- define "badge.artifactHub" -}}
-  [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/{{ template "chart.name" . }})](https://artifacthub.io/packages/helm/{{ template "chart.name" . }})
+  [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/{{ template "chart.name" . }})](https://artifacthub.io/packages/helm/k8s-at-home/{{ template "chart.name" . }})
 {{- end -}}
 {{- define "description.multiarch" -}}
 The default values and container images used in this chart will allow for running in a multi-arch cluster (amd64, arm, arm64)
@@ -69,4 +69,4 @@ For example,
 ```console
 helm install {{ template "chart.name" . }} {{ template "helm.path" . }} --values values.yaml
 ```
-{{- end -}}
+{{- end -}}

charts/frigate/Chart.yaml

@@ -1,18 +0,0 @@
-apiVersion: v2
-appVersion: "0.6.0"
-description: Realtime object detection on RTSP cameras with the Google Coral
-name: frigate
-version: 4.0.1
-keywords:
-  - tensorflow
-  - coral
-  - ml
-home: https://github.com/k8s-at-home/charts/tree/master/charts/frigate
-icon: https://upload.wikimedia.org/wikipedia/commons/a/a4/Lutine1.jpg
-sources:
-  - https://github.com/blakeblackshear/frigate
-maintainers:
-  - name: billimek
-    email: jeff@billimek.com
-  - name: blakeblackshear
-    email: blakeb@blakeshome.com

charts/frigate/OWNERS

@@ -1,4 +0,0 @@
-approvers:
-- billimek
-reviewers:
-- billimek

charts/frigate/README.md

@@ -1,99 +0,0 @@
-# frigate: Realtime object detection on RTSP cameras with the Google Coral
-
-This is a helm chart for [frigate](https://github.com/blakeblackshear/frigate)
-
-## TL;DR;
-
-```shell
-$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
-$ helm install k8s-at-home/frigate
-```
-
-## Installing the Chart
-
-To install the chart with the release name `my-release`:
-
-```console
-helm install --name my-release k8s-at-home/frigate
-```
-
-~~**IMPORTANT NOTE:** the [Google Coral USB Accelerator](https://coral.withgoogle.com/products/accelerator/) must be accessible on the node where this pod runs, in order for this chart to function properly.~~
-
-The Coral USB device is now optional
-
-A way to achieve this can be with nodeAffinity rules, for example:
-
-```yaml
-affinity:
-  nodeAffinity:
-    requiredDuringSchedulingIgnoredDuringExecution:
-      nodeSelectorTerms:
-      - matchExpressions:
-        - key: tpu
-          operator: In
-          values:
-          - google-coral
-```
-
-... where a node with an attached Coral USB device is labeled with `tpu: google-coral`
-
-## Uninstalling the Chart
-
-To uninstall/delete the `my-release` deployment:
-
-```console
-helm delete my-release --purge
-```
-
-The command removes all the Kubernetes components associated with the chart and deletes the release.
-
-## Configuration
-
-The following tables lists the configurable parameters of the Frigate chart and their default values.
-
-| Parameter                  | Description                         | Default                                                 |
-|----------------------------|-------------------------------------|---------------------------------------------------------|
-| `image.repository`         | Image repository | `blakeblackshear/frigate` |
-| `image.tag`                | Image tag. Possible values listed [here](https://hub.docker.com/r/blakeblackshear/frigate/tags/).| `0.5.1`|
-| `image.pullPolicy`         | Image pull policy | `IfNotPresent` |
-| `strategyType`             | Specifies the strategy used to replace old Pods by new ones | `Recreate` |
-| `timezone`                 | Timezone the frigate instance should run as, e.g. 'America/New_York' | `UTC` |
-| `rtspPassword`             | Password to use for RTSP cameras | `password` |
-| `extraSecretForEnvFrom`    | Secrets containing env variables for  | `[]` |
-| `coral.enabled`            | Use the Coral USB device | `false` |
-| `coral.hostPath`           | Host Path to reference USB device location (on the host) | `/dev/bus/usb` |
-| `masksConfigMap`           | Reference to existing ConfigMap that contains camera masks - [more info](https://github.com/blakeblackshear/frigate#masks-and-limiting-detection-to-a-certain-area) | `{}` |
-| `shmSize`                  | Shared memory size for processing | `1Gi` |
-| `config`                   | frigate configuration - see [config.yaml](https://github.com/blakeblackshear/frigate/blob/master/config/config.yml) for example  | `{}` |
-| `Service.type`          | Kubernetes service type for the frigate GUI | `ClusterIP` |
-| `Service.port`          | Kubernetes port where the frigate GUI is exposed| `5000` |
-| `Service.annotations`   | Service annotations for the frigate GUI | `{}` |
-| `Service.labels`        | Custom labels | `{}` |
-| `Service.loadBalancerIP` | Loadbalance IP for the frigate GUI | `{}` |
-| `Service.loadBalancerSourceRanges` | List of IP CIDRs allowed access to load balancer (if supported)      | None
-| `ingress.enabled`              | Enables Ingress | `false` |
-| `ingress.annotations`          | Ingress annotations | `{}` |
-| `ingress.labels`               | Custom labels                       | `{}`
-| `ingress.path`                 | Ingress path | `/` |
-| `ingress.hosts`                | Ingress accepted hostnames | `chart-example.local` |
-| `ingress.tls`                  | Ingress TLS configuration | `[]` |
-| `resources`                | CPU/Memory resource requests/limits | `{}` |
-| `nodeSelector`             | Node labels for pod assignment | `{}` |
-| `tolerations`              | Toleration labels for pod assignment | `[]` |
-| `affinity`                 | Affinity settings for pod assignment | `{}` |
-
-Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
-
-```console
-helm install --name my-release \
-  --set rtspPassword="nosecrets" \
-    k8s-at-home/frigate
-```
-
-Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
-
-```console
-helm install --name my-release -f values.yaml stable/frigate
-```
-
-Read through the [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/frigate/values.yaml) file. It has several commented out suggested values.

charts/frigate/ci/ci-values.yaml

@@ -1,8 +0,0 @@
-# Probes configuration
-probes:
-  liveness:
-    enabled: false
-  readiness:
-    enabled: false
-  startup:
-    enabled: false

charts/frigate/templates/NOTES.txt

@@ -1,19 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ . }}{{ $.Values.ingress.path }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "frigate.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "frigate.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "frigate.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "frigate.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:5000 to use your application"
-  kubectl port-forward $POD_NAME 5000:5000
-{{- end }}

charts/frigate/templates/_helpers.tpl

@@ -1,45 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "frigate.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "frigate.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "frigate.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "frigate.labels" -}}
-app.kubernetes.io/name: {{ include "frigate.name" . }}
-helm.sh/chart: {{ include "frigate.chart" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}

charts/frigate/templates/configmap.yaml

@@ -1,13 +0,0 @@
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ template "frigate.fullname" . }}
-  namespace: {{ .Release.Namespace }}
-  labels:
-    app.kubernetes.io/name: {{ include "frigate.name" . }}
-    helm.sh/chart: {{ include "frigate.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-data:
-  config.yml: |
-{{ .Values.config | indent 4 }}

charts/frigate/templates/deployment.yaml

@@ -1,149 +0,0 @@
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "frigate.fullname" . }}
-  labels:
-{{ include "frigate.labels" . | indent 4 }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  revisionHistoryLimit: 3
-  strategy:
-    type: {{ .Values.strategyType }}
-  selector:
-    matchLabels:
-      app.kubernetes.io/name: {{ include "frigate.name" . }}
-      app.kubernetes.io/instance: {{ .Release.Name }}
-  template:
-    metadata:
-      labels:
-        app.kubernetes.io/name: {{ include "frigate.name" . }}
-        app.kubernetes.io/instance: {{ .Release.Name }}
-      {{- if .Values.podAnnotations }}
-      annotations:
-        {{- range $key, $value := .Values.podAnnotations }}
-        {{ $key }}: {{ $value | quote }}
-        {{- end }}
-      {{- end }}
-    spec:
-    {{- with .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      initContainers:
-        - name: config
-          securityContext:
-            readOnlyRootFilesystem: true
-          image: "{{ .Values.initContainer.image.repository }}:{{ .Values.initContainer.image.tag }}"
-          imagePullPolicy: {{ .Values.initContainer.image.pullPolicy }}
-          volumeMounts:
-            - mountPath: /frigate-config
-              name: configmap
-            - mountPath: /masks
-              name: masks
-            - mountPath: /config
-              name: config
-              readOnly: false
-          command: ['sh', '-c']
-          args:
-            - cp /frigate-config/* /config;
-              {{- if .Values.masksConfigMap }}
-              cp /masks/* /config;
-              {{- end }}
-
-      containers:
-        - name: {{ .Chart.Name }}
-          image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
-          imagePullPolicy: {{ .Values.image.pullPolicy }}
-          securityContext:
-            privileged: true
-          ports:
-            - name: http
-              containerPort: 5000
-              protocol: TCP
-          {{- if .Values.probes.liveness.enabled }}
-          livenessProbe:
-            httpGet:
-              path: /
-              port: http
-              scheme: HTTP
-            initialDelaySeconds: {{ .Values.probes.liveness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.liveness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.liveness.timeoutSeconds }}
-          {{- end }}
-          {{- if .Values.probes.readiness.enabled }}
-          readinessProbe:
-            httpGet:
-              path: /
-              port: http
-              scheme: HTTP
-            initialDelaySeconds: {{ .Values.probes.readiness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.readiness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.readiness.timeoutSeconds }}
-          {{- end }}
-          {{- if .Values.probes.startup.enabled }}
-          startupProbe:
-            httpGet:
-              path: /
-              port: http
-              scheme: HTTP
-            failureThreshold: {{ .Values.probes.startup.failureThreshold }}
-            periodSeconds: {{ .Values.probes.startup.periodSeconds }}
-          {{- end }}
-          env:
-            {{- if .Values.timezone }}
-            - name: TZ
-              value: "{{ .Values.timezone }}"
-            {{- end }}
-            - name: FRIGATE_RTSP_PASSWORD
-              value: "{{ .Values.rtspPassword }}"
-          envFrom:
-          {{- range .Values.extraSecretForEnvFrom }}
-            - secretRef:
-                name: {{ . }}
-          {{- end }}
-          volumeMounts:
-            {{- if .Values.coral.enabled }}
-            - mountPath: /dev/bus/usb
-              name: usb
-            {{- end }}
-            - mountPath: /config
-              name: config
-            - name: dshm
-              mountPath: /dev/shm
-          resources:
-            {{- toYaml .Values.resources | nindent 12 }}
-      volumes:
-        - name: config
-          emptyDir: {}
-        - name: configmap
-          configMap:
-            name: {{ template "frigate.fullname" . }}
-        - name: masks
-          {{- if .Values.masksConfigMap }}
-          configMap:
-            name: {{ .Values.masksConfigMap }}
-          {{- else }}
-          emptyDir:
-            {}
-          {{- end }}
-        {{- if .Values.coral.enabled }}
-        - name: usb
-          hostPath:
-            path: {{ .Values.coral.hostPath }}
-        {{- end }}
-        - name: dshm
-          emptyDir:
-            medium: Memory
-            sizeLimit: {{ .Values.shmSize }}
-      {{- with .Values.nodeSelector }}
-      nodeSelector:
-        {{- toYaml . | nindent 8 }}
-      {{- end }}
-    {{- with .Values.affinity }}
-      affinity:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-    {{- with .Values.tolerations }}
-      tolerations:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}

charts/frigate/templates/ingress.yaml

@@ -1,35 +0,0 @@
-{{- if .Values.ingress.enabled -}}
-{{- $fullName := include "frigate.fullname" . -}}
-{{- $ingressPath := .Values.ingress.path -}}
-apiVersion: extensions/v1beta1
-kind: Ingress
-metadata:
-  name: {{ $fullName }}
-  labels:
-{{ include "frigate.labels" . | indent 4 }}
-  {{- with .Values.ingress.annotations }}
-  annotations:
-    {{- toYaml . | nindent 4 }}
-  {{- end }}
-spec:
-{{- if .Values.ingress.tls }}
-  tls:
-  {{- range .Values.ingress.tls }}
-    - hosts:
-      {{- range .hosts }}
-        - {{ . | quote }}
-      {{- end }}
-      secretName: {{ .secretName }}
-  {{- end }}
-{{- end }}
-  rules:
-  {{- range .Values.ingress.hosts }}
-    - host: {{ . | quote }}
-      http:
-        paths:
-          - path: {{ $ingressPath }}
-            backend:
-              serviceName: {{ $fullName }}
-              servicePort: http
-  {{- end }}
-{{- end }}

charts/frigate/templates/service.yaml

@@ -1,49 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ template "frigate.fullname" . }}
-  labels:
-{{ include "frigate.labels" . | indent 4 }}
-{{- if .Values.service.labels }}
-{{ toYaml .Values.service.labels | indent 4 }}
-{{- end }}
-{{- with .Values.service.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if (or (eq .Values.service.type "ClusterIP") (empty .Values.service.type)) }}
-  type: ClusterIP
-  {{- if .Values.service.clusterIP }}
-  clusterIP: {{ .Values.service.clusterIP }}
-  {{end}}
-{{- else if eq .Values.service.type "LoadBalancer" }}
-  type: {{ .Values.service.type }}
-  {{- if .Values.service.loadBalancerIP }}
-  loadBalancerIP: {{ .Values.service.loadBalancerIP }}
-  {{- end }}
-  {{- if .Values.service.loadBalancerSourceRanges }}
-  loadBalancerSourceRanges:
-{{ toYaml .Values.service.loadBalancerSourceRanges | indent 4 }}
-  {{- end -}}
-{{- else }}
-  type: {{ .Values.service.type }}
-{{- end }}
-{{- if .Values.service.externalIPs }}
-  externalIPs:
-{{ toYaml .Values.service.externalIPs | indent 4 }}
-{{- end }}
-  {{- if .Values.service.externalTrafficPolicy }}
-  externalTrafficPolicy: {{ .Values.service.externalTrafficPolicy }}
-  {{- end }}
-  ports:
-    - name: http
-      port: {{ .Values.service.port }}
-      protocol: TCP
-      targetPort: http
-{{ if (and (eq .Values.service.type "NodePort") (not (empty .Values.service.nodePort))) }}
-      nodePort: {{.Values.service.nodePort}}
-{{ end }}
-  selector:
-    app.kubernetes.io/name: {{ include "frigate.name" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}

charts/frigate/values.yaml

@@ -1,251 +0,0 @@
-# Default values for frigate.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-# upgrade strategy type (e.g. Recreate or RollingUpdate)
-strategyType: Recreate
-
-image:
-  repository: blakeblackshear/frigate
-  tag: 0.6.0
-  pullPolicy: IfNotPresent
-
-rtspPassword: password
-
-# secret name containing environment variables for frigate
-extraSecretForEnvFrom: []
-
-coral:
-  enabled: false
-  hostPath: /dev/bus/usb
-
-# Specify image that generates the config folder containing the Frigate config file, masks (if specified), etc.
-initContainer:
-  image:
-    repository: busybox
-    tag: latest
-    pullPolicy: Always
-
-# reference to configMap that contains the binary data of the masks to be copied into the container
-# this requires that generateConfigFolder.enabled = true
-# see https://github.com/blakeblackshear/frigate#masks-and-limiting-detection-to-a-certain-area for more info
-masksConfigMap: {}
-
-shmSize: 1Gi
-
-imagePullSecrets: []
-nameOverride: ""
-fullnameOverride: ""
-
-# frigate configuration - see https://github.com/blakeblackshear/frigate/blob/master/config/config.yml for example
-config: |
-  web_port: 5000
-
-  mqtt:
-    host: test.mosquitto.org
-    topic_prefix: frigate
-    # client_id: frigate # Optional -- set to override default client id of 'frigate' if running multiple instances
-    # user: username # Optional
-    #################
-    ## Environment variables that begin with 'FRIGATE_' may be referenced in {}.
-    ##   password: '{FRIGATE_MQTT_PASSWORD}'
-    #################
-    # password: password # Optional
-
-  #################
-  # Default ffmpeg args. Optional and can be overwritten per camera.
-  # Should work with most RTSP cameras that send h264 video
-  # Built from the properties below with:
-  # "ffmpeg" + global_args + input_args + "-i" + input + output_args
-  #################
-  # ffmpeg:
-  #   global_args:
-  #     - -hide_banner
-  #     - -loglevel
-  #     - panic
-  #   hwaccel_args: []
-  #   input_args:
-  #     - -avoid_negative_ts
-  #     - make_zero
-  #     - -fflags
-  #     - nobuffer
-  #     - -flags
-  #     - low_delay
-  #     - -strict
-  #     - experimental
-  #     - -fflags
-  #     - +genpts+discardcorrupt
-  #     - -vsync
-  #     - drop
-  #     - -rtsp_transport
-  #     - tcp
-  #     - -stimeout
-  #     - '5000000'
-  #     - -use_wallclock_as_timestamps
-  #     - '1'
-  #   output_args:
-  #     - -f
-  #     - rawvideo
-  #     - -pix_fmt
-  #     - rgb24
-
-  ####################
-  # Global object configuration. Applies to all cameras
-  # unless overridden at the camera levels.
-  # Keys must be valid labels. By default, the model uses coco (https://dl.google.com/coral/canned_models/coco_labels.txt).
-  # All labels from the model are reported over MQTT. These values are used to filter out false positives.
-  # min_area (optional): minimum width*height of the bounding box for the detected person
-  # max_area (optional): maximum width*height of the bounding box for the detected person
-  # threshold (optional): The minimum decimal percentage (50% hit = 0.5) for the confidence from tensorflow
-  ####################
-  objects:
-    track:
-      - person
-      - car
-      - truck
-    filters:
-      person:
-        min_area: 5000
-        max_area: 100000
-        threshold: 0.5
-
-  cameras:
-    back:
-      ffmpeg:
-        ################
-        # Source passed to ffmpeg after the -i parameter. Supports anything compatible with OpenCV and FFmpeg.
-        # Environment variables that begin with 'FRIGATE_' may be referenced in {}
-        ################
-        input: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
-        #################
-        # These values will override default values for just this camera
-        #################
-        # global_args: []
-        # hwaccel_args: []
-        # input_args: []
-        # output_args: []
-
-      ################
-      ## Optionally specify the resolution of the video feed. Frigate will try to auto detect if not specified
-      ################
-      # height: 1280
-      # width: 720
-
-      ################
-      ## Optional mask. Must be the same aspect ratio as your video feed.
-      ##
-      ## The mask works by looking at the bottom center of the bounding box for the detected
-      ## person in the image. If that pixel in the mask is a black pixel, it ignores it as a
-      ## false positive. In my mask, the grass and driveway visible from my backdoor camera
-      ## are white. The garage doors, sky, and trees (anywhere it would be impossible for a
-      ## person to stand) are black.
-      ##
-      ## Masked areas are also ignored for motion detection.
-      ################
-      # mask: back-mask.bmp
-
-      ################
-      # Allows you to limit the framerate within frigate for cameras that do not support
-      # custom framerates. A value of 1 tells frigate to look at every frame, 2 every 2nd frame,
-      # 3 every 3rd frame, etc.
-      ################
-      take_frame: 1
-
-      ################
-      # The expected framerate for the camera. Frigate will try and ensure it maintains this framerate
-      # by dropping frames as necessary. Setting this lower than the actual framerate will allow frigate
-      # to process every frame at the expense of realtime processing.
-      ################
-      fps: 5
-
-      ################
-      # Configuration for the snapshots in the debug view and mqtt
-      ################
-      snapshots:
-        show_timestamp: True
-
-      ################
-      # Camera level object config. This config is merged with the global config above.
-      ################
-      objects:
-        track:
-          - person
-        filters:
-          person:
-            min_area: 5000
-            max_area: 100000
-            threshold: 0.5
-
-
-# Probes configuration
-probes:
-  liveness:
-    enabled: true
-    initialDelaySeconds: 30
-    failureThreshold: 5
-    timeoutSeconds: 10
-  readiness:
-    enabled: true
-    initialDelaySeconds: 30
-    failureThreshold: 5
-    timeoutSeconds: 10
-  startup:
-    enabled: false
-    failureThreshold: 30
-    periodSeconds: 10
-
-service:
-  type: ClusterIP
-  port: 5000
-  ## Specify the nodePort value for the LoadBalancer and NodePort service types.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
-  ##
-  # nodePort:
-  ## Provide any additional annotations which may be required. This can be used to
-  ## set the LoadBalancer service type to internal only.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
-  ##
-  annotations: {}
-  labels: {}
-  ## Use loadBalancerIP to request a specific static IP,
-  ## otherwise leave blank
-  ##
-  loadBalancerIP:
-  # loadBalancerSourceRanges: []
-  ## Set the externalTrafficPolicy in the Service to either Cluster or Local
-  # externalTrafficPolicy: Cluster
-
-ingress:
-  enabled: false
-  annotations: {}
-    # kubernetes.io/ingress.class: nginx
-    # kubernetes.io/tls-acme: "true"
-  path: /
-  hosts:
-    - chart-example.local
-  tls: []
-  #  - secretName: chart-example-tls
-  #    hosts:
-  #      - chart-example.local
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}
-
-podAnnotations: {}

charts/gonic/Chart.yaml

@@ -0,0 +1,20 @@
+apiVersion: v2
+appVersion: latest
+description: Music streaming server / subsonic server API implementation
+name: gonic
+version: 1.0.0
+keywords:
+  - music
+  - subsonic
+home: https://github.com/k8s-at-home/charts/tree/master/charts/gonic
+icon: https://raw.githubusercontent.com/sentriz/gonic/master/.github/logo.png
+sources:
+  - https://github.com/sentriz/gonic
+  - https://hub.docker.com/r/sentriz/gonic
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/gonic/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/gonic/README.md

@@ -0,0 +1,67 @@
+# Gonic
+
+This is a helm chart for [Gonic](https://github.com/sentriz/gonic).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/gonic
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/gonic
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/gonic/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install gonic \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/gonic
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install gonic k8s-at-home/gonic --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/gonic/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/gonic/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/gonic/values.yaml

@@ -0,0 +1,40 @@
+# Default values for Gonic.
+
+image:
+  repository: sentriz/gonic
+  pullPolicy: IfNotPresent
+  tag: latest
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+# # See more environment variables in the gonic documentation
+# https://github.com/sentriz/gonic#configuration-options
+env: {}
+  # TZ: UTC
+
+persistence:
+  data:
+    enabled: false
+    emptyDir: false
+
+  music:
+    enabled: false
+    emptyDir: false
+    mountPath: /music
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""

charts/home-assistant/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 2020.12.1
+appVersion: 2021.1.5
 description: Home Assistant
 name: home-assistant
-version: 5.4.1
+version: 5.4.4
 keywords:
 - home-assistant
 - hass

charts/home-assistant/values.yaml

@@ -1,9 +1,9 @@
-# Default values for zwave2mqtt.
+# Default values for home-assistant.
 
 image:
   repository: homeassistant/home-assistant
   pullPolicy: IfNotPresent
-  tag: 2020.12.1
+  tag: 2021.1.5
 
 strategy:
   type: Recreate

charts/ombi/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.0.681
 description: Want a Movie or TV Show on Plex or Emby? Use Ombi!
 name: ombi
-version: 6.4.1
+version: 7.0.0
 keywords:
   - ombi
   - plex
@@ -22,7 +22,3 @@ dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
     version: 2.2.1
-  - name: mariadb
-    version: 9.2.0
-    repository: https://charts.bitnami.com/bitnami
-    condition: mariadb.enabled

charts/ombi/values.yaml

@@ -21,16 +21,3 @@ persistence:
   config:
     enabled: false
     emptyDir: false
-
-# Enabled mariadb
-# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/mariadb
-mariadb:
-  enabled: false
-  architecture: standalone
-  auth:
-    database: ombi
-    username: ombi
-    password: ombi
-  primary:
-    persistence:
-      enabled: false

charts/paperless/Chart.yaml

@@ -1,14 +1,14 @@
 apiVersion: v2
-appVersion: 2.7.0
+appVersion: 1.0.0
 description: Paperless - Index and archive all of your scanned paper documents
 name: paperless
-version: 2.3.1
+version: 3.0.0
 keywords:
   - paperless
 home: https://github.com/k8s-at-home/charts/tree/master/charts/paperless
 icon: https://raw.githubusercontent.com/the-paperless-project/paperless/master/src/paperless/static/paperless/img/logo-dark.png
 sources:
-  - https://github.com/the-paperless-project/paperless
+  - https://github.com/jonaswinkler/paperless-ng
 maintainers:
   - name: mr-onion-2
 dependencies:

charts/paperless/README.md

@@ -1,6 +1,6 @@
 # Paperless
 
-This is a helm chart for [Paperless](https://github.com/the-paperless-project/paperless). The documentation can be found [here](https://paperless.readthedocs.io/en/latest/index.html).
+This is a helm chart for [Paperless-ng](https://github.com/jonaswinkler/paperless-ng). The documentation can be found [here](https://paperless-ng.readthedocs.io/en/latest/).
 
 **This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose).**
 
@@ -35,16 +35,23 @@ The chart's [values.yaml](https://github.com/k8s-at-home/charts/blob/master/char
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 ```console
 helm install paperless \
-  --set env.TZ="America/New_York" \
+  --set env.PAPERLESS_TIME_ZONE="America/New_York" \
     k8s-at-home/paperless
 ```
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
 ```console
 helm install paperless k8s-at-home/paperless --values values.yaml
 ```
+---
 
-## Backup & Restore
-Documents can be exported and re-imported by running the following commands directly on the pod. [More info](https://paperless.readthedocs.io/en/latest/migrating.html).
+## Upgrading an existing Release to a new major version
 
-Backup: `/usr/src/paperless/src/manage.py document_exporter /path/to/somewhere/`
-Restore: `/usr/src/paperless/src/manage.py document_importer /path/to/somewhere/`
+A major chart version change (like 1.0.1 -> 2.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+### Upgrading from 2.x.x to 3.x.x
+
+Version 3.0.0 of this chart has been adapted for [Paperless-ng](https://github.com/jonaswinkler/paperless-ng) (currently a fork of the main project). The default `values.yaml` has been updated accordingly. Changes include:
+
+* A new set of [environment variables](https://github.com/jonaswinkler/paperless-ng/blob/master/paperless.conf.example)
+* New mouthPath defaults for the consume and export volumes
+* Seperate consumer pod no longer required.

charts/paperless/ci/ct-values.yaml

@@ -2,16 +2,12 @@ persistence:
   data:
     enabled: true
     emptyDir: true
-    mountPath: /usr/src/paperless/data
   media:
     enabled: true
     emptyDir: true
-    mountPath: /usr/src/paperless/media
   consume:
     enabled: true
     emptyDir: true
-    mountPath: /consume
   export:
     enabled: true
     emptyDir: true
-    mountPath: /export

charts/paperless/templates/NOTES.txt

@@ -1 +1,4 @@
-{{- include "common.notes.defaultNotes" . -}}
+{{- include "common.notes.defaultNotes" . }}
+2. Create a super user by running the command:
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "common.names.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  kubectl exec -it --namespace {{ .Release.Namespace }} $POD_NAME -- bash -c "python manage.py createsuperuser"

charts/paperless/values.yaml

@@ -1,26 +1,23 @@
 # Default values for Paperless.
 
 image:
-  repository: thepaperlessproject/paperless
+  repository: jonaswinkler/paperless-ng
   pullPolicy: IfNotPresent
   tag: latest
 
-args: "['gunicorn', '-b', '0.0.0.0:8000']"
-
 strategy:
   type: Recreate
 
-# See the following files for supported environment variables
-# https://github.com/the-paperless-project/paperless/blob/master/docker-compose.env.example
-# https://github.com/the-paperless-project/paperless/blob/master/paperless.conf.example
+# See the following files for additional environment variables
+# https://github.com/jonaswinkler/paperless-ng/tree/master/docker/compose/
+# https://github.com/jonaswinkler/paperless-ng/blob/master/paperless.conf.example
 env:
-  # TZ: Europe/London
-  PAPERLESS_OCR_LANGUAGES: eng
-  # PAPERLESS_FORGIVING_OCR: true
-  # PAPERLESS_DISABLE_LOGIN: true
-  # PAPERLESS_INLINE_DOC: true
-  # PAPERLESS_OCR_THREADS:
-  # PAPERLESS_CONVERT_DENSITY:
+  COMPOSE_PROJECT_NAME: paperless
+  PAPERLESS_REDIS: redis://localhost:6379
+  PAPERLESS_OCR_LANGUAGE: eng
+  # USERMAP_UID: 1000
+  # USERMAP_GID: 1000
+  # PAPERLESS_TIME_ZONE: Europe/London
 
 service:
   port:
@@ -30,27 +27,21 @@ persistence:
   data:
     enabled: false
     mountPath: /usr/src/paperless/data
+    emptyDir: false
   media:
     enabled: false
     mountPath: /usr/src/paperless/media
+    emptyDir: false
   consume:
     enabled: false
-    mountPath: /consume
+    mountPath: /usr/src/paperless/consume
+    emptyDir: false
   export:
     enabled: false
-    mountPath: /export
+    mountPath: /usr/src/paperless/export
+    emptyDir: false
 
 additionalContainers:
-  - name: consumer
-    image: thepaperlessproject/paperless:latest
+  - name: broker
+    image: redis:6.0
     imagePullPolicy: IfNotPresent
-    args: ['document_consumer']
-    volumeMounts:
-    - mountPath: /usr/src/paperless/data
-      name: data
-    - mountPath: /usr/src/paperless/media
-      name: media
-    - mountPath: /consume
-      name: consume
-    - mountPath: /export
-      name: export

charts/protonmail-bridge/Chart.yaml

@@ -0,0 +1,18 @@
+apiVersion: v2
+appVersion: 1.5.7-1
+description: Container for protonmail bridge to work on the network.
+name: protonmail-bridge
+version: 1.0.0
+keywords:
+  - protonmail
+  - protonmail-bridge
+sources:
+  - https://github.com/shenxn/protonmail-bridge-docker
+  - https://hub.docker.com/r/shenxn/protonmail-bridge
+maintainers:
+  - name: Eagleman7
+    email: my@email.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/protonmail-bridge/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/protonmail-bridge/README.md

@@ -0,0 +1,86 @@
+# Protonmail-bridge
+
+This is a helm chart for [Protonmail-bridge](https://github.com/shenxn/protonmail-bridge-docker).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/protonmail-bridge
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/protonmail-bridge
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/protonmail-bridge/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install protonmail-bridge \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/protonmail-bridge
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install protonmail-bridge k8s-at-home/protonmail-bridge --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+Get the name of your deployed pod kubectl get pods
+Run interactively on the pod (setup only) kubectl exec --stdin --tty protonmail-bridge-deployment-6c79fd7f84-ftwcw -- /bin/bash
+Once logged in, execute the init command bash /protonmail/entrypoint.sh init
+You should now see the CLI for protonmail-bridge, authenticate with login
+(optional) if you're like me and use split address mode, change mode and info are good for printing the details.
+Copy your SMTP server info (or IMAP, your choice)
+delete the active pod so a new one gets created (which will properly fire up with your persisted settings)
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+### Upgrading from 3.x.x to 4.x.x
+
+Due to migrating to a centralized common library some values in `values.yaml` have changed.
+
+Examples:
+
+* `service.port` has been moved to `service.port.port`.
+* `persistence.type` has been moved to `controllerType`.
+
+Refer to the library values.yaml for more configuration options.

charts/protonmail-bridge/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/protonmail-bridge/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/protonmail-bridge/values.yaml

@@ -0,0 +1,19 @@
+# Default values for Protonmail-bridge.
+
+image:
+  repository: shenxn/protonmail-bridge
+  tag: 1.5.7-1
+  pullPolicy: IfNotPresent
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 25
+    name: smtp-service
+
+persistence:
+  config:
+    enabled: true
+    mountPath: /root

charts/rtorrent-flood/README.md

@@ -1,3 +1,27 @@
 # rTorrent/flood BitTorrent client
 
-TBD
+## Setup
+
+NB: This chart will start 2 containers in a single pod, when both containers are started, you will be able to configure flood.
+
+1. Install the chart `helm install rtorrent k8s-at-home/rtorrent-flood`
+
+2. Port-forward to the container `kubectl port-forward $(kubectl get pods -A -o json | jq '.items[] | select(.metadata.labels."app.kubernetes.io/name"=="rtorrent-flood")' | jq .metadata.name -r) 3000:3000`
+
+3. To connect flood to rtorrent, provide the socket path : `/tmp/rtorrent.sock`
+
+4. When connected with flood to rtorrent, go to the settings and change the download path to `/data` which is set by default by the chart
+
+5. You should be able to start downloading torrents now :)
+
+
+## Custom parameters
+
+Like any other chart, you can provide a file with your own values (check `./values.yaml` for reference) :
+
+`helm install rtorrent k8s-at-home/rtorrent-flood -f my-values.yaml`
+
+
+## Pitfalls
+
+You may need to change the StorageClass depending on your kubernetes setup or the containers won't start, use a custom `values.yaml` file to do so.

charts/speedtest-prometheus/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 name: speedtest-prometheus
 description: Prometheus Exporter for the official Speedtest CLI
 type: application
-version: 2.0.0
+version: 2.1.0
 appVersion: 1.1.0
 keywords:
 - speedtest

charts/speedtest-prometheus/templates/deployment.yaml

@@ -11,6 +11,10 @@ spec:
       {{- include "speedtest-prometheus.selectorLabels" . | nindent 6 }}
   template:
     metadata:
+      {{- with .Values.podAnnotations }}
+      annotations:
+      {{- toYaml . | nindent 8 }}
+      {{- end }}
       labels:
         {{- include "speedtest-prometheus.selectorLabels" . | nindent 8 }}
     spec:

charts/speedtest-prometheus/values.yaml

@@ -46,6 +46,8 @@ tolerations: []
 
 affinity: {}
 
+podAnnotations: {}
+
 serviceMonitor:
   enabled: false
   interval: "60m"

charts/teedy/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/teedy/Chart.yaml

@@ -0,0 +1,25 @@
+apiVersion: v2
+appVersion: v1.9
+description: Teedy is an open source, lightweight document management system for individuals and businesses.
+name: teedy
+version: 1.0.1
+keywords:
+  - teedy
+  - documents
+  - management
+home: https://github.com/k8s-at-home/charts/tree/master/charts/teedy
+icon: https://camo.githubusercontent.com/529d95bcf95198a51c7176ed59068238a6099ee6828aa47a3aac697d6c5ee5f4/68747470733a2f2f74656564792e696f2f696d672f6769746875622d7469746c652e706e67
+sources:
+  - https://github.com/sismics/docs
+  - https://github.com/k8s-at-home/charts/tree/master/charts/teedy
+maintainers:
+  - name: carpenike
+    email: ryan@ryanholt.net
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1
+  - name: postgresql
+    version: 10.2.5
+    repository: https://charts.bitnami.com/bitnami
+    condition: postgresql.enabled

charts/teedy/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/teedy/README.md

@@ -0,0 +1,68 @@
+# teedy
+
+This is a helm chart for [teedy](https://github.com/sismics/docs).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/teedy
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/teedy
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/teedy/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install teedy \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/teedy
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install teedy k8s-at-home/teedy --values values.yaml
+```
+
+These values will be nested as it is a dependency, for example
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/teedy/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/teedy/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/teedy/values.yaml

@@ -0,0 +1,46 @@
+# Default values for teedy.
+
+image:
+  repository: sismics/docs
+  pullPolicy: IfNotPresent
+  tag: v1.9
+
+strategy:
+  type: Recreate
+
+# See more environment varaibles in the teedy documentation
+# https://github.com/sismics/docs
+env: {}
+  # DOCS_DEFAULT_LANGUAGE: eng
+  # DOCS_BASE_URL:
+  # DOCS_ADMIN_EMAIL_INIT:
+  # DOCS_ADMIN_PASSWORD_INIT:
+  # DATABASE_URL: 'jdbc:postgresql://teedy-postgresql:5432/teedydb"
+  # DATABASE_USER: teedyuser
+  # DATABASE_PASSWORD: "$2y$12$/MehlbYmXDq8sz1xdqOupOOHNUdsVrBLakdev6y5qqTUeHZqicYA6" # teedypassword
+  # DOCS_SMTP_HOSTNAME:
+  # DOCS_SMTP_PORT:
+  # DOCS_SMTP_USERNAME:
+  # DOCS_SMTP_PASSWORD:
+  # TZ:
+
+service:
+  port:
+    port: 8080
+
+persistence:
+  data:
+    enabled: false
+    emptyDir: false
+    mountPath: /data
+
+# Enables postgres
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/postgresql
+postgresql:
+  enabled: false
+  postgresqlUsername: teedyuser
+  postgresqlPassword: teedypassword
+  postgresqlDatabase: teedydb
+  persistence:
+    enabled: false
+    # storageClass: ""

charts/traefik-forward-auth/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 name: traefik-forward-auth
 description: A minimal forward authentication service that provides OAuth/SSO login and authentication for the traefik reverse proxy/load balancer
 type: application
-version: 1.0.4
+version: 1.0.5
 appVersion: 2.2.0
 keywords:
   - traefik

charts/traefik-forward-auth/README.md

@@ -1,6 +1,6 @@
 # traefik-forward-auth
 
-![Type: application](https://img.shields.io/badge/Type-application-informational?style=flat-square) ![Version: 1.0.1](https://img.shields.io/badge/Version-1.0.1-informational?style=flat-square) ![AppVersion: 2.2.0](https://img.shields.io/badge/AppVersion-2.2.0-informational?style=flat-square) [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/traefik-forward-auth)](https://artifacthub.io/packages/helm/traefik-forward-auth)
+![Type: application](https://img.shields.io/badge/Type-application-informational?style=flat-square) ![Version: 1.0.5](https://img.shields.io/badge/Version-1.0.5-informational?style=flat-square) ![AppVersion: 2.2.0](https://img.shields.io/badge/AppVersion-2.2.0-informational?style=flat-square) [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/traefik-forward-auth)](https://artifacthub.io/packages/helm/k8s-at-home/traefik-forward-auth)
 
 A minimal forward authentication service that provides OAuth/SSO login and authentication for the traefik reverse proxy/load balancer
 
@@ -61,11 +61,11 @@ helm install traefik-forward-auth k8s-at-home/traefik-forward-auth --values valu
 | cookie.domain | string | `""` | Domain(s) to set auth cookie on. (Comma delimited) |
 | cookie.insecure | string | `""` | Use insecure cookies |
 | cookie.name | string | `""` | Cookie Name (default: _forward_auth) |
-| cookie.secret | string| `""` | Cookie Secret - useful when running multiple instances |
+| cookie.secret | string | `""` | Cookie Secret used for authentication across multiple instances / clusters (default: randomly generated) |
 | default.action | string | `""` | [auth|allow] Default action (default: auth) |
 | default.provider | string | `""` | [google|oidc|generic-oauth] Default provider (default: google) |
 | env | list | `[]` |  |
-| envFrom | list | `[]` | Load environment variables from secrets or configmaps |
+| envFrom | string | `nil` |  |
 | fullnameOverride | string | `""` |  |
 | image.pullPolicy | string | `"IfNotPresent"` |  |
 | image.repository | string | `"thomseddon/traefik-forward-auth"` |  |

charts/unpackerr/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/unpackerr/Chart.yaml

@@ -0,0 +1,23 @@
+apiVersion: v2
+appVersion: 0.7.2
+description: This application runs as a daemon on your download host. It checks for completed downloads and extracts them so Radarr, Lidarr, Sonarr, and Readarr may import them.
+name: unpackerr
+version: 1.0.0
+keywords:
+  - unpackerr
+  - sonarr
+  - radarr
+  - lidarr
+  - readarr
+home: https://github.com/k8s-at-home/charts/tree/master/charts/unpackerr
+icon: https://raw.githubusercontent.com/wiki/davidnewhall/unpackerr/images/unpackerr-logo-text.png
+sources:
+  - https://github.com/davidnewhall/unpackerr
+  - https://hub.docker.com/r/golift/unpackerr
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/unpackerr/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/unpackerr/README.md

@@ -0,0 +1,67 @@
+# Unpackerr
+
+This is a helm chart for [Unpackerr](https://github.com/davidnewhall/unpackerr).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/unpackerr
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/unpackerr
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/unpackerr/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install unpackerr \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/unpackerr
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install unpackerr k8s-at-home/unpackerr --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/unpackerr/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/unpackerr/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/unpackerr/values.yaml

@@ -0,0 +1,43 @@
+# Default values for Unpackerr.
+
+image:
+  repository: golift/unpackerr
+  pullPolicy: IfNotPresent
+  tag: 0.7.2
+
+strategy:
+  type: Recreate
+
+service:
+  enabled: false
+
+probes:
+  liveness:
+    enabled: false
+  readiness:
+    enabled: false
+  startup:
+    enabled: false
+
+# # See more environment variables in the unpackerr documentation
+# https://github.com/davidnewhall/unpackerr#docker-env-variables
+env: {}
+  # TZ: UTC
+
+persistence:
+  downloads:
+    enabled: false
+    emptyDir: false
+    mountPath: /downloads
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""

charts/xbackbone/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/xbackbone/Chart.yaml

@@ -0,0 +1,20 @@
+apiVersion: v2
+appVersion: 3.3.3
+description: XBackBone is a simple, self-hosted, lightweight PHP file manager that support the instant sharing tool ShareX and *NIX systems. It supports uploading and displaying images, GIF, video, code, formatted text, and file downloading and uploading. Also have a web UI with multi user management, past uploads history and search support.
+name: xbackbone
+version: 1.0.0
+keywords:
+  - xbackbone
+  - xshare
+home: https://github.com/k8s-at-home/charts/tree/master/charts/xbackbone
+icon: https://github.com/SergiX44/XBackBone/raw/master/.github/xbackbone.png
+sources:
+  - https://github.com/SergiX44/XBackBone
+  - https://hub.docker.com/r/pe46dro/xbackbone-docker
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/xbackbone/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/xbackbone/README.md

@@ -0,0 +1,67 @@
+# XBackBone
+
+This is a helm chart for [XBackBone](https://github.com/SergiX44/XBackBone).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/xbackbone
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/xbackbone
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/xbackbone/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install xbackbone \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/xbackbone
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install xbackbone k8s-at-home/xbackbone --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/xbackbone/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/xbackbone/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/xbackbone/values.yaml

@@ -0,0 +1,23 @@
+# Default values for XBackbone.
+
+image:
+  repository: pe46dro/xbackbone-docker
+  pullPolicy: IfNotPresent
+  tag: 3.3.3
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+env: {}
+  # TZ: UTC
+  # LOG_LEVEL: info
+
+persistence:
+  config:
+    enabled: false
+    emptyDir: false
+    mountPath: /app/config

templates/chart/Chart.yaml

@@ -0,0 +1,19 @@
+apiVersion: v2
+appVersion: 1.0.0
+description: ${CHARTNAME} helm package
+name: ${CHARTNAME}
+version: 1.0.0
+keywords:
+  - ${CHARTNAME}
+home: https://github.com/k8s-at-home/charts/tree/master/charts/${CHARTNAME}
+icon: https://${CHARTNAME}.org/icon
+sources:
+  - https://github.com/${CHARTNAME}/${CHARTNAME}-docker
+  - https://github.com/k8s-at-home/charts/tree/master/charts/${CHARTNAME}
+maintainers:
+  - name: ${CHARTNAME}
+    email: ${CHARTNAME}@${CHARTNAME}.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

templates/chart/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

templates/chart/README.md

@@ -0,0 +1,68 @@
+# ${CHARTNAME}
+
+This is a helm chart for [${CHARTNAME}](https://${CHARTNAME}.org/).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/${CHARTNAME}
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/${CHARTNAME}
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/${CHARTNAME}/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install ${CHARTNAME} \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/${CHARTNAME}
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install ${CHARTNAME} k8s-at-home/${CHARTNAME} --values values.yaml
+```
+
+These values will be nested as it is a dependency, for example
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

templates/chart/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

templates/chart/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

templates/chart/values.yaml

@@ -0,0 +1,24 @@
+# Default values for ${CHARTNAME}.
+
+image:
+  repository: ${CHARTNAME}/${CHARTNAME}
+  pullPolicy: IfNotPresent
+  tag: 1.2.5
+
+strategy:
+  type: Recreate
+
+# See more environment varaibles in the ${CHARTNAME} documentation
+# https://${CHARTNAME}.org/docs
+env: {}
+  # TZ:
+
+service:
+  port:
+    port: 1880
+
+# persistence:
+#   data:
+#     enabled: false
+#     emptyDir: false
+#     mountPath: /data