[chart] Update Helm chart common to v4 (#1115)

* [chart] Update Helm chart common to v4

Co-authored-by: Renovate Bot <bot@renovateapp.com>
Co-authored-by: Bᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs <me@bjw-s.dev>
Co-authored-by: Horváth Zoltán <zhorvath83@gmail.com>

.all-contributorsrc

@@ -238,6 +238,69 @@
       "contributions": [
         "code"
       ]
+    },
+    {
+      "login": "brandon099",
+      "name": "Brandon Clifford",
+      "avatar_url": "https://avatars.githubusercontent.com/u/1628223?v=4",
+      "profile": "https://github.com/brandon099",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "Truxnell",
+      "name": "Nat Allan",
+      "avatar_url": "https://avatars.githubusercontent.com/u/19149206?v=4",
+      "profile": "http://www.voltaicforge.com",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "jmmaloney4",
+      "name": "Jack Maloney",
+      "avatar_url": "https://avatars.githubusercontent.com/u/5781547?v=4",
+      "profile": "https://github.com/jmmaloney4",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "zamnuts",
+      "name": "Andrew Zammit",
+      "avatar_url": "https://avatars.githubusercontent.com/u/4969305?v=4",
+      "profile": "https://github.com/zamnuts",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "TuxOtaku",
+      "name": "Ryan Draga",
+      "avatar_url": "https://avatars.githubusercontent.com/u/3494484?v=4",
+      "profile": "https://boxingoctop.us",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "jkroepke",
+      "name": "Jan-Otto Kröpke",
+      "avatar_url": "https://avatars.githubusercontent.com/u/1560587?v=4",
+      "profile": "https://github.com/jkroepke",
+      "contributions": [
+        "code"
+      ]
+    },
+    {
+      "login": "chris-sanders",
+      "name": "Chris Sanders",
+      "avatar_url": "https://avatars.githubusercontent.com/u/813115?v=4",
+      "profile": "https://github.com/chris-sanders",
+      "contributions": [
+        "code"
+      ]
     }
   ],
   "contributorsPerLine": 7,

.devcontainer/Dockerfile

@@ -1,26 +0,0 @@
-# See here for image contents: https://github.com/microsoft/vscode-dev-containers/tree/v0.154.0/containers/ruby/.devcontainer/base.Dockerfile
-
-# [Choice] Ruby version: 2, 2.7, 2.6, 2.5
-ARG VARIANT="2"
-FROM mcr.microsoft.com/vscode/devcontainers/ruby:0-${VARIANT}
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-COPY Gemfile /tmp/Gemfile
-
-RUN \
-  apt-get update \
-  && \
-  apt-get -y install --no-install-recommends \
-    jq \
-    libjq-dev \
-    libonig-dev \
-    gnupg2 \
-  && \
-  sh -c "$(curl --location https://taskfile.dev/install.sh)" -- -d -b /usr/local/bin \
-  && \
-  curl -fsSL https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | /bin/bash - \
-  && \
-  bundle config set system 'true' \
-  && bundle install --gemfile /tmp/Gemfile \
-  && rm /tmp/Gemfile

.devcontainer/devcontainer.json

@@ -1,33 +0,0 @@
-// For format details, see https://aka.ms/devcontainer.json. For config options, see the README at:
-// https://github.com/microsoft/vscode-dev-containers/tree/v0.154.0/containers/ruby
-{
-	"name": "Ruby",
-	"build": {
-		"context": "..",
-		"dockerfile": "Dockerfile",
-		"args": { 
-			// Update 'VARIANT' to pick a Ruby version: 2, 2.7, 2.6, 2.5
-			"VARIANT": "2.7",
-		}
-	},
-
-	// Set *default* container specific settings.json values on container create.
-	"settings": { 
-		"terminal.integrated.shell.linux": "/bin/bash"
-	},
-
-	// Add the IDs of extensions you want installed when the container is created.
-	"extensions": [
-		"ms-kubernetes-tools.vscode-kubernetes-tools",
-		"rebornix.Ruby"
-	],
-	
-	// Use 'forwardPorts' to make a list of ports inside the container available locally.
-	// "forwardPorts": [],
-
-	// Use 'postCreateCommand' to run commands after the container is created.
-	"postCreateCommand": "export RUBYJQ_USE_SYSTEM_LIBRARIES=1 && bundle install",
-
-	// Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
-	"remoteUser": "vscode"
-}

.github/ct-install.yaml

@@ -6,16 +6,17 @@ chart-dirs:
 - charts/stable
 excluded-charts:
 - charts/stable/alertmanager-bot
-- charts/stable/dnsmadeeasy-webhook
+- charts/stable/amcrest2mqtt
+- charts/stable/foundryvtt
 - charts/stable/multus
+- charts/stable/pod-gateway
 - charts/stable/promcord
 - charts/stable/reg
 - charts/stable/ser2sock
 - charts/stable/zalando-postgres-cluster
 - charts/stable/zigbee2mqtt
-- charts/stable/founderyvtt
-- charts/stable/pod-gateway
 chart-repos:
 - bitnami=https://charts.bitnami.com/bitnami
 - k8s-at-home-libraries=https://library-charts.k8s-at-home.com
 - k8s-at-home=https://k8s-at-home.com/charts
+- jetstack=https://charts.jetstack.io

.github/ct-lint.yaml

@@ -9,3 +9,4 @@ chart-repos:
 - bitnami=https://charts.bitnami.com/bitnami
 - k8s-at-home-libraries=https://library-charts.k8s-at-home.com
 - k8s-at-home=https://k8s-at-home.com/charts
+- jetstack=https://charts.jetstack.io

.github/label-commenter-config.yml

@@ -1,6 +1,6 @@
 ---
 labels:
-  - name: kind:invalid-template
+  - name: kind:incomplete-template
     labeled:
       issue:
         body: |
@@ -13,7 +13,7 @@ labels:
     labeled:
       issue:
         body: |
-          :wave: @{issue-author}, we use the issue tracker exclusively
+          :wave: @{{ issue.user.login }}, we use the issue tracker exclusively
           for bug reports and feature requests. However, this issue appears
           to be a support request. Please use our support channels
           to get help.
@@ -22,8 +22,28 @@ labels:
           - [GitHub Discussions](https://github.com/k8s-at-home/organization/discussions)
         action: close
 
-  - name: kind:incomplete-pr
+  - name: kind:incomplete-docs
     labeled:
       pr:
         body: |
-          :wave: @{{ pull_request.user.login }}, thanks for taking the time to submit this PR. 🙏🏽 Would you mind updating the `version` in `Chart.yaml` per [semver](http://semver.org/) and then update `README_CHANGELOG.md.gotmpl` and run `./hack/gen-helm-docs.sh stable <chart>` again?
+          :wave: @{{ pull_request.user.login }}, thanks for taking the time to submit this PR. 🙏🏽
+
+          We have noticed that the chart documentation has not been completely updated for this PR.
+          Could you please make sure that the following items have been updated:
+          - `version` in `Chart.yaml` has been updated per [semver](http://semver.org/)
+          - `README_CHANGELOG.md.gotmpl` contains a summary of the updates for this new version
+          - [Documentation strings](https://github.com/norwoodj/helm-docs#valuesyaml-metadata) have been added to the keys in `values.yaml`.
+
+          Afterwards you can run `./hack/gen-helm-docs.sh stable <chart>` again to update the chart's `README.md` file.
+
+  - name: kind:incorrect-title
+    labeled:
+      pr:
+        body: |
+          :wave: @{{ pull_request.user.login }}, thanks for taking the time to submit this PR. 🙏🏽
+
+          We have noticed that the PR title does not adhere to our desired format.
+          Could you please make sure that it follows the pattern `[<lowercase chart name>] <Update description>`?
+          Example: `[radarr] Update image version`.
+
+          Thanks!

.github/workflows/charts-helm-docs.yaml.disabled

@@ -1,52 +0,0 @@
-#
-# Disabled until we fix the chart releaser
-#
-
-# name: "Charts: helm-docs"
-
-# on:
-#   workflow_dispatch:
-#   schedule:
-#   - cron: "0 0 * * *"
-
-# jobs:
-#   update-helm-docs:
-#     runs-on: ubuntu-20.04
-#     steps:
-#     - name: Checkout
-#       uses: actions/checkout@v2
-#       with:
-#         fetch-depth: 0
-
-#     - name: Install Helm
-#       uses: azure/setup-helm@v1
-#       with:
-#         version: v3.5.3
-
-#     - uses: actions/setup-python@v2
-#       with:
-#         python-version: 3.7
-    
-#     - name: Install helm-docs
-#       run: |
-#         wget -O /tmp/helm-docs.deb  https://github.com/norwoodj/helm-docs/releases/download/v1.5.0/helm-docs_1.5.0_linux_amd64.deb
-#         sudo dpkg -i /tmp/helm-docs.deb
-
-#     - name: Update Helm docs
-#       run: |
-#         ./hack/gen-helm-docs.sh
-        
-#     - name: Create pull request for helm-docs
-#       uses: peter-evans/create-pull-request@v3
-#       with:
-#         token: ${{ secrets.GITHUB_TOKEN }}
-#         branch: "helm-docs/ci"
-#         delete-branch: true
-#         title: "chore(docs): update helm-docs [ci-skip]"
-#         signoff: true
-#         committer: "${{ github.actor }} <${{ github.actor }}@users.noreply.github.com>"
-#         author: "${{ github.actor }} <${{ github.actor }}@users.noreply.github.com>"
-#         commit-message: "chore(docs): update helm-docs [ci-skip]"
-#         body: |
-#           Signed-off-by: ${{ github.actor }} <${{ github.actor }}@users.noreply.github.com>
-#         labels: helm-docs

.github/workflows/charts-lint-test.yaml

@@ -9,9 +9,12 @@ on:
     - '!charts/**/README_CHANGELOG.md.gotmpl'
     - '!charts/**/README_CONFIG.md.gotmpl'
 
+concurrency:
+  group: ${{ github.head_ref }}-lint
+  cancel-in-progress: true
+
 jobs:
   changes-lint:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Detect changes for linting
     runs-on: ubuntu-20.04
     outputs:
@@ -27,7 +30,7 @@ jobs:
         fetch-depth: 0
 
     - name: Set up chart-testing
-      uses: helm/chart-testing-action@v2.0.1
+      uses: helm/chart-testing-action@v2.1.0
 
     - name: Install Dev tools
       run: |
@@ -47,7 +50,6 @@ jobs:
         fi
 
   changes-install:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Detect changes for install
     runs-on: ubuntu-20.04
     outputs:
@@ -63,7 +65,7 @@ jobs:
         fetch-depth: 0
 
     - name: Set up chart-testing
-      uses: helm/chart-testing-action@v2.0.1
+      uses: helm/chart-testing-action@v2.1.0
 
     - name: Install Dev tools
       run: |
@@ -85,7 +87,8 @@ jobs:
   lint:
     needs:
     - changes-lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-lint.outputs.detected == 'true'"
+    if:
+      needs.changes-lint.outputs.detected == 'true'
     name: Lint charts
     runs-on: ubuntu-20.04
     steps:
@@ -97,14 +100,14 @@ jobs:
     - name: Install Helm
       uses: azure/setup-helm@v1
       with:
-        version: v3.5.3
+        version: v3.6.3
 
     - uses: actions/setup-python@v2
       with:
         python-version: 3.7
 
     - name: Set up chart-testing
-      uses: helm/chart-testing-action@v2.0.1
+      uses: helm/chart-testing-action@v2.1.0
 
     - name: Run chart-testing (lint)
       id: lint
@@ -113,7 +116,6 @@ jobs:
   unittest:
     needs:
     - lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Run unit tests
     runs-on: ubuntu-20.04
     steps:
@@ -128,7 +130,7 @@ jobs:
     - name: Install Helm
       uses: azure/setup-helm@v1
       with:
-        version: v3.5.3
+        version: v3.6.3
 
     - name: Install Ruby
       uses: ruby/setup-ruby@v1
@@ -149,7 +151,8 @@ jobs:
     needs:
     - changes-install
     - lint
-    if: "!contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-install.outputs.detected == 'true'"
+    if:
+      needs.changes-install.outputs.detected == 'true'
     name: Install charts
     strategy:
       matrix: ${{ fromJson(needs.changes-install.outputs.matrix) }}
@@ -165,14 +168,14 @@ jobs:
     - name: Install Helm
       uses: azure/setup-helm@v1
       with:
-        version: v3.5.3
+        version: v3.6.3
 
     - uses: actions/setup-python@v2
       with:
         python-version: 3.7
 
     - name: Set up chart-testing
-      uses: helm/chart-testing-action@v2.0.1
+      uses: helm/chart-testing-action@v2.1.0
 
     - name: Create k3d cluster
       uses: nolar/setup-k3d-k3s@v1
@@ -196,5 +199,5 @@ jobs:
     runs-on: ubuntu-20.04
     steps:
     - name: Check install matrix status
-      if: ${{ !contains(github.event.head_commit.message, '[ci-skip]') && needs.changes-install.outputs.detected == 'true' && needs.install.result != 'success' }}
+      if: ${{ needs.changes-install.outputs.detected == 'true' && needs.install.result != 'success' }}
       run: exit 1

.github/workflows/charts-release.yaml

@@ -9,30 +9,115 @@ on:
     - master
     paths:
     - 'charts/**'
-    - '!charts/**/README.md'
-    - '!charts/**/README.md.gotmpl'
-    - '!charts/**/README_CHANGELOG.md.gotmpl'
-    - '!charts/**/README_CONFIG.md.gotmpl'
 
 jobs:
-  release:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
+  generate-readme:
+    name: Auto-generate chart README
     runs-on: ubuntu-20.04
     steps:
+    - name: Get k8s-at-home token
+      id: get-app-token
+      uses: getsentry/action-github-app-token@v1
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
     - name: Checkout
       uses: actions/checkout@v2
       with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        ref: master
+
+    - uses: dorny/paths-filter@v2
+      id: filter
+      with:
+        base: ${{ github.ref }}
+        list-files: shell
+        filters: |
+          addedOrModified:
+            - added|modified: 'charts/**'
+
+    - name: Install Helm
+      if: steps.filter.outputs.addedOrModified == 'true'
+      uses: azure/setup-helm@v1
+      with:
+        version: v3.6.3
+
+    - uses: actions/setup-python@v2
+      if: steps.filter.outputs.addedOrModified == 'true'
+      with:
+        python-version: 3.7
+
+    - name: Install helm-docs
+      if: steps.filter.outputs.addedOrModified == 'true'
+      run: |
+        wget -O /tmp/helm-docs.deb  https://github.com/norwoodj/helm-docs/releases/download/v1.5.0/helm-docs_1.5.0_linux_amd64.deb
+        sudo dpkg -i /tmp/helm-docs.deb
+
+    - name: Run against changed charts
+      if: steps.filter.outputs.addedOrModified == 'true'
+      run: |
+        CHARTS=()
+        PATHS=(${{ steps.filter.outputs.addedOrModified_files }})
+        # Get only the chart paths
+        for i in "${PATHS[@]}"
+        do
+            IFS='/' read -r -a path_parts <<< "$i"
+            CHARTS+=("${path_parts[1]}/${path_parts[2]}")
+        done
+
+        # Remove duplicates
+        CHARTS=( `for i in ${CHARTS[@]}; do echo $i; done | sort -u` )
+
+        for i in "${CHARTS[@]}"
+        do
+            echo "Rendering README for chart ${i}"
+            IFS='/' read -r -a chart_parts <<< "$i"
+            if [ -f "charts/${chart_parts[0]}"/"${chart_parts[1]}/Chart.yaml" ]; then
+              ./hack/gen-helm-docs.sh "${chart_parts[0]}" "${chart_parts[1]}"
+            fi
+            echo ""
+        done
+
+    - name: Create commit
+      if: steps.filter.outputs.addedOrModified == 'true'
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        push_options: --force
+        commit_message: Auto-generate chart README [no ci]
+        commit_user_name: k8s-at-home[bot]
+        commit_user_email: k8s-at-home[bot]@users.noreply.github.com
+        commit_author: k8s-at-home[bot] <k8s-at-home[bot]@users.noreply.github.com>
+        file_pattern: charts/**/
+
+  release:
+    runs-on: ubuntu-20.04
+    needs:
+    - generate-readme
+    steps:
+    - name: Get k8s-at-home token
+      id: get-app-token
+      uses: getsentry/action-github-app-token@v1
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - name: Checkout
+      uses: actions/checkout@v2
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        ref: master
         fetch-depth: 0
 
     - name: Configure Git
       run: |
-        git config user.name "$GITHUB_ACTOR"
-        git config user.email "$GITHUB_ACTOR@users.noreply.github.com"
+        git config user.name "k8s-at-home[bot]"
+        git config user.email "k8s-at-home[bot]@users.noreply.github.com"
 
     - name: Install Helm
       uses: azure/setup-helm@v1
       with:
-        version: v3.5.3
+        version: v3.6.3
 
     - name: Run chart-releaser
       uses: helm/chart-releaser-action@v1.2.1
@@ -40,5 +125,44 @@ jobs:
         charts_dir: charts/*
         charts_repo_url: https://k8s-at-home.com/charts/
       env:
-        CR_TOKEN: "${{ secrets.GITHUB_TOKEN }}"
+        CR_TOKEN: "${{ steps.get-app-token.outputs.token }}"
         CR_SKIP_EXISTING: "true"
+
+  generate-summary:
+    name: Auto-generate charts summary
+    runs-on: ubuntu-20.04
+    needs:
+    - release
+    steps:
+    - name: Get k8s-at-home token
+      id: get-app-token
+      uses: getsentry/action-github-app-token@v1
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - name: Checkout
+      uses: actions/checkout@v2
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        ref: master
+        fetch-depth: 0
+
+    - name: Install yq
+      uses: chrisdickinson/setup-yq@latest
+      with:
+        yq-version: v4.9.3
+
+    - name: Run script
+      run: |
+        ./hack/gen-chart-summary.sh
+
+    - name: Create Commit
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        push_options: --force
+        commit_message: Auto-generate chart summary [no ci]
+        commit_user_name: k8s-at-home[bot]
+        commit_user_email: k8s-at-home[bot]@users.noreply.github.com
+        commit_author: k8s-at-home[bot] <k8s-at-home[bot]@users.noreply.github.com>
+        file_pattern: charts/README.md

.github/workflows/label-commenter.yaml

@@ -1,28 +0,0 @@
----
-name: 'Label Commenter'
-
-on:
-  issues:
-    types:
-      - labeled
-      - unlabeled
-  pull_request_target:
-    types:
-      - labeled
-      - unlabeled
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-
-jobs:
-  support:
-    runs-on: ubuntu-20.04
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        ref: master
-
-    - name: Label Commenter
-      uses: peaceiris/actions-label-commenter@v1

.github/workflows/metadata-label-commenter.yaml

@@ -0,0 +1,37 @@
+---
+name: 'Metadata: Label Commenter'
+
+on:
+  issues:
+    types:
+      - labeled
+      - unlabeled
+  pull_request_target:
+    types:
+      - labeled
+      - unlabeled
+
+permissions:
+  contents: read
+  issues: write
+  pull-requests: write
+
+jobs:
+  comment:
+    name: Label commenter
+    runs-on: ubuntu-20.04
+    steps:
+    - uses: getsentry/action-github-app-token@v1
+      id: get-app-token
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - uses: actions/checkout@v2
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        ref: master
+
+    - uses: peaceiris/actions-label-commenter@v1
+      with:
+        github_token: ${{ steps.get-app-token.outputs.token }}

.github/workflows/metadata-label-issues-prs.yaml

@@ -0,0 +1,71 @@
+---
+name: "Metadata: Label issues and pull requests"
+
+on:
+  issues:
+    types:
+      - opened
+      - edited
+      - closed
+      - reopened
+  pull_request_target:
+    types:
+      - opened
+      - edited
+      - closed
+      - reopened
+      - ready_for_review
+      - synchronize
+
+jobs:
+  label:
+    name: Label issues and pull requests
+    runs-on: ubuntu-20.04
+    steps:
+    - uses: getsentry/action-github-app-token@v1
+      id: get-app-token
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - uses: Videndum/label-mastermind@2.1.3
+      with:
+        GITHUB_TOKEN: ${{ steps.get-app-token.outputs.token }}
+        configJSON: |
+          {
+            "releaseMastermind": {
+              "labels": {
+                "kind:incorrect-title": {
+                  "name": "kind:incorrect-title",
+                  "colour": "#ffb700",
+                  "description": "Incorrect title"
+                }
+              },
+              "runners": [
+                {
+                  "root": ".",
+                  "versioning": {
+                    "source": "milestones",
+                    "type": "other"
+                  },
+                  "pr": {
+                    "labels": {
+                      "kind:incorrect-title": {
+                        "requires": 2,
+                        "conditions": [
+                          {
+                            "type": "creatorMatches",
+                            "pattern": "^(?!renovate).+"
+                          },
+                          {
+                            "type": "titleMatches",
+                            "pattern": "^(?!\\[[a-z0-9\\-]+\\]\\s.+).+"
+                          }
+                        ]
+                      }
+                    }
+                  }
+                }
+              ]
+            }
+          }

.github/workflows/metadata-label-pr-ci-status.yaml

@@ -0,0 +1,126 @@
+---
+name: "Metadata: Label pull requests CI status"
+
+on:
+  workflow_run:
+    workflows:
+    - "Pre-commit consistency check"
+    - "Charts: Lint and test"
+    types:
+    - completed
+
+jobs:
+  label-precommit:
+    name: Label pre-commit status
+    runs-on: ubuntu-20.04
+    if: "${{ github.event.workflow.name == 'Pre-commit consistency check' }}"
+    steps:
+    - uses: getsentry/action-github-app-token@v1
+      id: get-app-token
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - name: "Get information about the origin 'CI' run"
+      uses: potiuk/get-workflow-origin@v1_3
+      id: source-run-info
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        sourceRunId: ${{ github.event.workflow_run.id }}
+
+    - name: Label precommit success
+      uses: andymckay/labeler@1.0.3
+      if: ${{ github.event.workflow_run.conclusion == 'success' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "precommit:ok"
+        remove-labels: "precommit:failed"
+
+    - name: Label precommit failure
+      uses: andymckay/labeler@1.0.3
+      if: ${{ github.event.workflow_run.conclusion == 'failure' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "precommit:failed"
+        remove-labels: "precommit:ok"
+
+  label-lint-install:
+    name: Label lint and install status
+    runs-on: ubuntu-20.04
+    if: "${{ github.event.workflow.name == 'Charts: Lint and test' }}"
+    steps:
+    - uses: getsentry/action-github-app-token@v1
+      id: get-app-token
+      with:
+        app_id: ${{ secrets.K8S_AT_HOME_APP_ID }}
+        private_key: ${{ secrets.K8S_AT_HOME_APP_PRIVATE_KEY }}
+
+    - name: "Get information about the origin 'CI' run"
+      uses: potiuk/get-workflow-origin@v1_3
+      id: source-run-info
+      with:
+        token: ${{ steps.get-app-token.outputs.token }}
+        sourceRunId: ${{ github.event.workflow_run.id }}
+
+    - name: "Get workflow job status"
+      uses: actions/github-script@v4
+      id: get-workflow-jobs
+      with:
+        github-token: ${{ steps.get-app-token.outputs.token }}
+        script: |
+          let result = new Object
+
+          const wfJobs = await github.actions.listJobsForWorkflowRun({
+            owner: context.repo.owner,
+            repo: context.repo.repo,
+            run_id: context.payload.workflow_run.id,
+          })
+
+          for (const job of wfJobs.data.jobs) {
+            if (job.name === 'Lint charts') {
+              result['lint'] = job.conclusion
+            } else if (job.name === 'Install successful') {
+              result['install'] = job.conclusion
+            }
+          }
+
+          console.log(result)
+          return result
+
+    - name: Label lint success
+      uses: andymckay/labeler@1.0.3
+      if: ${{ fromJSON(steps.get-workflow-jobs.outputs.result).lint == 'success' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "lint:ok"
+        remove-labels: "lint:failed"
+
+    - name: Label lint failure
+      uses: andymckay/labeler@1.0.3
+      if: ${{ fromJSON(steps.get-workflow-jobs.outputs.result).lint == 'failure' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "lint:failed"
+        remove-labels: "lint:ok"
+
+    - name: Label install success
+      uses: andymckay/labeler@1.0.3
+      if: ${{ fromJSON(steps.get-workflow-jobs.outputs.result).install == 'success' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "install:ok"
+        remove-labels: "install:failed"
+
+    - name: Label install failure
+      uses: andymckay/labeler@1.0.3
+      if: ${{ fromJSON(steps.get-workflow-jobs.outputs.result).install == 'failure' }}
+      with:
+        repo-token: ${{ steps.get-app-token.outputs.token }}
+        issue-number: ${{ steps.source-run-info.outputs.pullRequestNumber }}
+        add-labels: "install:failed"
+        remove-labels: "install:ok"

.github/workflows/pre-commit-check.yaml

@@ -4,9 +4,12 @@ on:
   workflow_dispatch:
   pull_request:
 
+concurrency:
+  group: ${{ github.head_ref }}-precommit
+  cancel-in-progress: true
+
 jobs:
   pre-commit-check:
-    if: "!contains(github.event.head_commit.message, '[ci-skip]')"
     name: Run pre-commit checks
     runs-on: ubuntu-20.04
     steps:

.pre-commit-config.yaml

@@ -1,7 +1,7 @@
 # See https://pre-commit.com for more information
 repos:
 - repo: https://github.com/pre-commit/pre-commit-hooks
-  rev: v3.4.0
+  rev: v4.0.1
   hooks:
   - id: trailing-whitespace
   - id: end-of-file-fixer

.taskfiles/Taskfile_chart.yml

@@ -25,6 +25,14 @@ tasks:
     - helm dependency update
     silent: true
 
+  dependency-cleanup:
+    desc: clean up chart dependencies
+    dir: "{{.GIT_ROOT}}/charts"
+    cmds:
+    - find {{.GIT_ROOT}}/charts/ -type f -name 'Chart.lock' -mindepth 1 -print0 | xargs -r -0 rm
+    - find {{.GIT_ROOT}}/charts/ -type d -name 'charts' -mindepth 1 -print0 | xargs -r -0 rm -rf
+    silent: true
+
   lint:
     desc: lint your chart code
     dir: "{{.GIT_ROOT}}/charts/{{.CHART_TYPE}}/{{.CHART}}"
@@ -41,7 +49,7 @@ tasks:
     deps:
     - check-chart
     - lint
-  
+
   helm-docs:
     desc: generate helm-docs
     dir: "{{.GIT_ROOT}}/hack"

.vscode/extensions.json

@@ -1,5 +1,7 @@
 {
-	"recommendations": [
-		"ms-vscode-remote.remote-containers"
-	]
-}
+    "recommendations": [
+        "ms-kubernetes-tools.vscode-kubernetes-tools",
+        "ms-vscode-remote.remote-containers",
+        "mrmlnc.vscode-json5"
+    ]
+}

.vscode/launch.json

@@ -1,34 +0,0 @@
-{
-    // Use IntelliSense to learn about possible attributes.
-    // Hover to view descriptions of existing attributes.
-    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "UnitTest - active spec file only",
-            "type": "Ruby",
-            "request": "launch",
-            "cwd": "${workspaceRoot}",
-            "program": "/usr/local/bin/bundle",
-            "args": [
-                "exec",
-                "m",
-                "-r",
-                "${relativeFile}"
-            ]
-        },
-        {
-            "name": "UnitTest - all spec files",
-            "type": "Ruby",
-            "request": "launch",
-            "cwd": "${workspaceRoot}",
-            "program": "/usr/local/bin/bundle",
-            "args": [
-                "exec",
-                "m",
-                "-r",
-                "${workspaceFolder}/test/charts"
-            ]
-        }
-    ]
-}

README.md

@@ -1,6 +1,6 @@
 # Helm charts
 <!-- ALL-CONTRIBUTORS-BADGE:START - Do not remove or modify this section -->
-[![All Contributors](https://img.shields.io/badge/all_contributors-26-orange.svg?style=flat-square)](#contributors-)
+[![All Contributors](https://img.shields.io/badge/all_contributors-33-orange.svg?style=flat-square)](#contributors-)
 <!-- ALL-CONTRIBUTORS-BADGE:END -->
 
 [![docs](https://img.shields.io/badge/docs-rtfm-yellow?logo=gitbook&logoColor=white&style=for-the-badge)](https://docs.k8s-at-home.com/)
@@ -80,6 +80,15 @@ Thanks goes to these wonderful people ([emoji key](https://allcontributors.org/d
     <td align="center"><a href="https://github.com/jr0dd"><img src="https://avatars.githubusercontent.com/u/285797?v=4?s=100" width="100px;" alt=""/><br /><sub><b>jr0dd</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=jr0dd" title="Code">💻</a></td>
     <td align="center"><a href="https://4xxi.com"><img src="https://avatars.githubusercontent.com/u/167288?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Aleksandr Beshkenadze</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=beshkenadze" title="Code">💻</a></td>
     <td align="center"><a href="https://unasuke.com"><img src="https://avatars.githubusercontent.com/u/4487291?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Yusuke Nakamura</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=unasuke" title="Code">💻</a></td>
+    <td align="center"><a href="https://github.com/brandon099"><img src="https://avatars.githubusercontent.com/u/1628223?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Brandon Clifford</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=brandon099" title="Code">💻</a></td>
+    <td align="center"><a href="http://www.voltaicforge.com"><img src="https://avatars.githubusercontent.com/u/19149206?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Nat Allan</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=Truxnell" title="Code">💻</a></td>
+  </tr>
+  <tr>
+    <td align="center"><a href="https://github.com/jmmaloney4"><img src="https://avatars.githubusercontent.com/u/5781547?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Jack Maloney</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=jmmaloney4" title="Code">💻</a></td>
+    <td align="center"><a href="https://github.com/zamnuts"><img src="https://avatars.githubusercontent.com/u/4969305?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Andrew Zammit</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=zamnuts" title="Code">💻</a></td>
+    <td align="center"><a href="https://boxingoctop.us"><img src="https://avatars.githubusercontent.com/u/3494484?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Ryan Draga</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=TuxOtaku" title="Code">💻</a></td>
+    <td align="center"><a href="https://github.com/jkroepke"><img src="https://avatars.githubusercontent.com/u/1560587?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Jan-Otto Kröpke</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=jkroepke" title="Code">💻</a></td>
+    <td align="center"><a href="https://github.com/chris-sanders"><img src="https://avatars.githubusercontent.com/u/813115?v=4?s=100" width="100px;" alt=""/><br /><sub><b>Chris Sanders</b></sub></a><br /><a href="https://github.com/k8s-at-home/charts/commits?author=chris-sanders" title="Code">💻</a></td>
   </tr>
 </table>
 

charts/README.md

@@ -0,0 +1,146 @@
+# Helm charts overview
+### Stable charts:
+| Chart | Description |
+| ----- | ----------- |
+| [adguard-home](stable/adguard-home) | DNS proxy as ad-blocker for local network |
+| [airsonic](stable/airsonic) | Airsonic is a Free and Open Source community driven media server |
+| [alertmanager-bot](stable/alertmanager-bot) | Bot for Prometheus Alertmanager |
+| [amcrest2mqtt](stable/amcrest2mqtt) | Expose all events from an Amcrest device to an MQTT broker |
+| [apache-musicindex](stable/apache-musicindex) | Index and stream music using apache-musicindex and m3u playlists |
+| [appdaemon](stable/appdaemon) | AppDaemon is a loosely coupled, multi-threaded, sandboxed python execution environment for writing automation apps for various types of Home Automation Software including Home Assistant and MQTT. |
+| [baikal](stable/baikal) | Baïkal is a lightweight CalDAV+CardDAV server. It offers a web interface with management of users, address books and calendars. |
+| [bazarr](stable/bazarr) | Bazarr is a companion application to Sonarr and Radarr. It manages and downloads subtitles based on your requirements |
+| [blocky](stable/blocky) | DNS proxy as ad-blocker for local network |
+| [booksonic-air](stable/booksonic-air) | Booksonic is a platform for accessing the audibooks you own wherever you are |
+| [bookstack](stable/bookstack) | A simple, self-hosted, easy-to-use platform for organising and storing information. |
+| [calibre-web](stable/calibre-web) | Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database. |
+| [calibre](stable/calibre) | Calibre is a powerful and easy to use e-book manager. |
+| [comcast](stable/comcast) | periodic comcast data usage checks and save the results to InfluxDB |
+| [deconz](stable/deconz) | deCONZ is an easy to use control software, with which you can set up and control Zigbee networks of any size without further programming effort. |
+| [deluge](stable/deluge) | Deluge is a torrent download client |
+| [dizquetv](stable/dizquetv) | Create live TV channel streams from media on your Plex servers. |
+| [dnsmadeeasy-webhook](stable/dnsmadeeasy-webhook) | Cert-Manager Webhook for DNSMadeEasy |
+| [dsmr-reader](stable/dsmr-reader) | DSMR-protocol reader, telegram data storage and energy consumption visualizer. |
+| [duplicati](stable/duplicati) | Store securely encrypted backups on cloud storage services! |
+| [emby](stable/emby) | Emby Server is a home media server |
+| [esphome](stable/esphome) | ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems. |
+| [flaresolverr](stable/flaresolverr) | FlareSolverr is a proxy server to bypass Cloudflare protection |
+| [flood](stable/flood) | Flood is a monitoring service for various torrent clients |
+| [focalboard](stable/focalboard) | Focalboard is an open source, self-hosted alternative to Trello, Notion, and Asana. |
+| [foundryvtt](stable/foundryvtt) | An easy-to-deploy Dockerized Foundry Virtual Tabletop server |
+| [freshrss](stable/freshrss) | FreshRSS is a self-hosted RSS feed aggregator |
+| [frigate](stable/frigate) | NVR With Realtime Object Detection for IP Cameras |
+| [gaps](stable/gaps) | Gaps searches through your Plex Server or local folders for all movies, then queries for known movies in the same collection. |
+| [gollum](stable/gollum) | Gollum is a simple wiki system built on top of Git |
+| [gonic](stable/gonic) | Music streaming server / subsonic server API implementation |
+| [grocy](stable/grocy) | ERP beyond your fridge - grocy is a web-based self-hosted groceries & household management solution for your home |
+| [haste-server](stable/haste-server) | Simple text sharing |
+| [healthchecks](stable/healthchecks) | Healthchecks is a cron job monitoring service. It listens for HTTP requests and email messages ("pings") from your cron jobs and scheduled tasks ("checks"). When a ping does not arrive on time, Healthchecks sends out alerts. |
+| [heimdall](stable/heimdall) | An Application dashboard and launcher |
+| [home-assistant](stable/home-assistant) | Home Assistant |
+| [homebridge](stable/homebridge) | A lightweight NodeJS server that emulates the iOS HomeKit API |
+| [homer](stable/homer) | A dead simple static HOMepage for your servER to keep your services on hand, from a simple yaml configuration file. |
+| [hyperion-ng](stable/hyperion-ng) | Hyperion is an opensource Bias or Ambient Lighting implementation |
+| [icantbelieveitsnotvaletudo](stable/icantbelieveitsnotvaletudo) | Create live map data from Valetudo powered robots |
+| [icinga2](stable/icinga2) | A monitoring system which checks the availability of your network resources, notifies users of outages, and generates performance data for reporting. |
+| [intel-gpu-plugin](stable/intel-gpu-plugin) | The Intel GPU plugin facilitates offloading the processing of computation intensive workloads to GPU hardware |
+| [jackett](stable/jackett) | API Support for your favorite torrent trackers |
+| [jellyfin](stable/jellyfin) | Jellyfin is a Free Software Media System |
+| [jetbrains-projector](stable/jetbrains-projector) | Projector is a technology to run and access JetBrains IDEs remotely |
+| [joplin-server](stable/joplin-server) | This server allows you to sync any Joplin client |
+| [kanboard](stable/kanboard) | Kanboard is a free and open source Kanban project management software. |
+| [komga](stable/komga) | A comics/mangas server to serve/stream pages via API |
+| [lazylibrarian](stable/lazylibrarian) | A Helm chart for deploying LazyLibrarian |
+| [leaf2mqtt](stable/leaf2mqtt) | Nissan Leaf connected services to MQTT adapter |
+| [librespeed](stable/librespeed) | Librespeed is a HTML5 webpage to test upload and download speeds |
+| [lidarr](stable/lidarr) | Looks and smells like Sonarr but made for music |
+| [lychee](stable/lychee) | Lychee is a free photo-management tool, which runs on your server or web-space |
+| [magic-mirror](stable/magic-mirror) | magic-mirror helm package |
+| [mealie](stable/mealie) | Mealie is a self hosted recipe manager and meal planner with a RestAPI backend and a reactive frontend application built in Vue for a pleasant user experience for the whole family. |
+| [miniflux](stable/miniflux) | Miniflux is a minimalist and opinionated feed reader. |
+| [minio-console](stable/minio-console) | A management console for minio server and operator |
+| [modem-stats](stable/modem-stats) | periodic cable modem data collection and save the results to InfluxDB |
+| [monica](stable/monica) | A Personal Relationship Management tool to help you organize your social life |
+| [mosquitto](stable/mosquitto) | Eclipse Mosquitto - An open source MQTT broker |
+| [multus](stable/multus) | multus CNI allows multiple NICs per pod |
+| [mylar](stable/mylar) | Mylar is the automated Comic Book downloader (cbr/cbz) for use with various download clients. |
+| [navidrome](stable/navidrome) | Navidrome is an open source web-based music collection server and streamer |
+| [neolink](stable/neolink) | Neolink - RTSP bridge to Reolink IP cameras |
+| [network-ups-tools](stable/network-ups-tools) | Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. |
+| [node-red](stable/node-red) | Node-RED is low-code programming for event-driven applications |
+| [nullserv](stable/nullserv) | A simple null file http and https server |
+| [nzbget](stable/nzbget) | NZBGet is a Usenet downloader client |
+| [nzbhydra2](stable/nzbhydra2) | Usenet meta search |
+| [oauth2-proxy](stable/oauth2-proxy) | A reverse proxy that provides authentication with Google, Github or other providers |
+| [octoprint](stable/octoprint) | OctoPrint is the snappy web interface for your 3D printer |
+| [omada-controller](stable/omada-controller) | Omada enables the network administrators to monitor and manage all the Omada products in the network with a centralized management platform. |
+| [ombi](stable/ombi) | Want a Movie or TV Show on Plex or Emby? Use Ombi! |
+| [openemr](stable/openemr) | OpenEMR is the most popular open source electronic health records and medical practice management solution. |
+| [openkm](stable/openkm) | OpenKM integrates all essential documents management, collaboration and an advanced search functionality into one easy to use solution. |
+| [organizr](stable/organizr) | HTPC/Homelab Services Organizer |
+| [overseerr](stable/overseerr) | Overseerr is a free and open source software application for managing requests for your media library. It integrates with your existing services such as Sonarr, Radarr and Plex! |
+| [owncast](stable/owncast) | Take control over your live stream video by running it yourself. Streaming + chat out of the box. |
+| [owncloud-ocis](stable/owncloud-ocis) | ownCloud Infinite Scale is a self-hosted file sync and share server. |
+| [paperless](stable/paperless) | Paperless - Index and archive all of your scanned paper documents |
+| [photoprism](stable/photoprism) | PhotoPrism® is a server-based application for browsing, organizing and sharing your personal photo collection |
+| [piaware](stable/piaware) | Program for forwarding ADS-B data to FlightAware |
+| [plex](stable/plex) | Plex Media Server |
+| [pod-gateway](stable/pod-gateway) | Admision controller to change the default gateway and DNS server of PODs |
+| [powerdns](stable/powerdns) | PowerDNS is a DNS server, written in C++ and licensed under the GPL. It runs on most Unix derivatives. PowerDNS features a large number of different backends ranging from simple BIND style zonefiles to relational databases and load balancing/failover algorithms. A DNS recursor is provided as a separate program. |
+| [pretend-youre-xyzzy](stable/pretend-youre-xyzzy) | pretend-youre-xyzzy, a cards against humanity clone |
+| [promcord](stable/promcord) | Discord bot that provides metrics from a Discord server |
+| [prometheus-nut-exporter](stable/prometheus-nut-exporter) | Prometheus NUT Exporter a service monitor to send NUT server metrics to a Prometheus instance. |
+| [protonmail-bridge](stable/protonmail-bridge) | Container for protonmail bridge to work on the network. |
+| [prowlarr](stable/prowlarr) | Indexer manager/proxy built on the popular arr net base stack to integrate with your various PVR apps. |
+| [pyload](stable/pyload) | pyLoad is a Free and Open Source download manager written in Python and designed to be extremely lightweight, easily extensible and fully manageable via web. |
+| [qbittorrent](stable/qbittorrent) | qBittorrent is a cross-platform free and open-source BitTorrent client |
+| [radarr](stable/radarr) | A fork of Sonarr to work with movies à la Couchpotato |
+| [readarr](stable/readarr) | A fork of Radarr to work with Books & AudioBooks |
+| [recipes](stable/recipes) | Recipes is a Django application to manage, tag and search recipes using either built in models or external storage providers hosting PDF's, Images or other files. |
+| [reg](stable/reg) | Docker registry v2 command line client and repo listing generator with security checks. |
+| [resilio-sync](stable/resilio-sync) | Resilio Sync is a fast, reliable, and simple file sync and share solution, powered by P2P technology |
+| [reverse-proxy](stable/reverse-proxy) | Creates ingress reverse-proxies for external hosts with minimum boilerplate |
+| [rtorrent-flood](stable/rtorrent-flood) | rTorrent is a stable, high-performance and low resource consumption BitTorrent client. |
+| [sabnzbd](stable/sabnzbd) | Free and easy binary newsreader |
+| [samba](stable/samba) | A simple in-cluster Samba server |
+| [searx](stable/searx) | Searx is a privacy-respecting, hackable metasearch engine |
+| [ser2sock](stable/ser2sock) | Serial to Socket Redirector |
+| [sharry](stable/sharry) | Sharry allows to share files with others in a simple way. It is a self-hosted web application. The basic concept is to upload files and get a url back that can then be shared. |
+| [shlink](stable/shlink) | A self-hosted and PHP-based URL shortener application with CLI and REST interfaces |
+| [smarter-device-manager](stable/smarter-device-manager) | Manage hardware resource allocation without a need for privileged containers |
+| [sonarr](stable/sonarr) | Smart PVR for newsgroup and bittorrent users |
+| [speedtest-exporter](stable/speedtest-exporter) | Speedtest Exporter made in python using the official speedtest bin |
+| [stash](stable/stash) | An organizer for your porn, written in Go |
+| [statping](stable/statping) | Status page for monitoring your websites and applications |
+| [syncthing](stable/syncthing) | Open Source Continuous File Synchronization |
+| [tautulli](stable/tautulli) | A Python based monitoring and tracking tool for Plex Media Server |
+| [tdarr](stable/tdarr) | Tdarr is a self hosted web-app for automating media library transcode/remux management and making sure your files are exactly how you need them to be in terms of codecs/streams/containers etc. |
+| [teedy](stable/teedy) | Teedy is an open source, lightweight document management system for individuals and businesses. |
+| [teslamate](stable/teslamate) | A self-hosted data logger for your Tesla 🚘 |
+| [thelounge](stable/thelounge) | The Lounge, modern web IRC client designed for self-hosting |
+| [traccar](stable/traccar) | Traccar is an open source GPS tracking system. |
+| [traefik-forward-auth](stable/traefik-forward-auth) | A minimal forward authentication service that provides OAuth/SSO login and authentication for the traefik reverse proxy/load balancer |
+| [transmission](stable/transmission) | Transmission is a cross-platform BitTorrent client |
+| [truecommand](stable/truecommand) | Central Management of TrueNAS storage systems |
+| [tt-rss](stable/tt-rss) | Tiny Tiny RSS is a free and open source web-based news feed (RSS/Atom) reader and aggregator |
+| [tvheadend](stable/tvheadend) | TVheadend - a TV streaming server and digital video recorder |
+| [unifi-poller](stable/unifi-poller) | Collect ALL UniFi Controller, Site, Device & Client Data - Export to InfluxDB or Prometheus |
+| [unifi](stable/unifi) | Ubiquiti Network's Unifi Controller |
+| [unpackerr](stable/unpackerr) | This application runs as a daemon on your download host. It checks for completed downloads and extracts them so Radarr, Lidarr, Sonarr, and Readarr may import them. |
+| [uptimerobot-prometheus](stable/uptimerobot-prometheus) | Prometheus Exporter for the official uptimerobot CLI |
+| [uptimerobot](stable/uptimerobot) | A tool to get statistics from Uptime Robot and log it into InfluxDB |
+| [valheim](stable/valheim) | Valheim dedicated gameserver with automatic update and world backup support |
+| [vaultwarden](stable/vaultwarden) | Vaultwarden is a Bitwarden compatable server in Rust |
+| [vikunja](stable/vikunja) | The to-do app to organize your life |
+| [wallabag](stable/wallabag) | A self hostable application for saving web pages, freely. |
+| [whoogle](stable/whoogle) | A self-hosted, ad-free, privacy-respecting metasearch engine |
+| [wikijs](stable/wikijs) | Make documentation a joy to write using Wiki.js's beautiful and intuitive interface! |
+| [xbackbone](stable/xbackbone) | XBackBone is a simple, self-hosted, lightweight PHP file manager that support the instant sharing tool ShareX and *NIX systems. It supports uploading and displaying images, GIF, video, code, formatted text, and file downloading and uploading. Also have a web UI with multi user management, past uploads history and search support. |
+| [xteve](stable/xteve) | M3U Proxy for Plex DVR and Emby Live TV. |
+| [youtubedl-material](stable/youtubedl-material) | Self-hosted YouTube downloader built on Material Design |
+| [zalando-postgres-cluster](stable/zalando-postgres-cluster) | Creates a postgres cluster using the Zalando Postgres operator and local storage |
+| [zigbee2mqtt](stable/zigbee2mqtt) | Bridges events and allows you to control your Zigbee devices via MQTT |
+| [zwavejs2mqtt](stable/zwavejs2mqtt) | Fully configurable Zwave to MQTT Gateway and Control Panel |
+### Incubator charts:
+| Chart | Description |
+| ----- | ----------- |

charts/stable/adguard-home/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v0.105.2
+appVersion: v0.106.3
 description: DNS proxy as ad-blocker for local network
 name: adguard-home
-version: 3.3.1
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - adguard-home
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/adguard-home/README.md

@@ -1,6 +1,6 @@
 # adguard-home
 
-![Version: 3.3.1](https://img.shields.io/badge/Version-3.3.1-informational?style=flat-square) ![AppVersion: v0.105.2](https://img.shields.io/badge/AppVersion-v0.105.2-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v0.106.3](https://img.shields.io/badge/AppVersion-v0.106.3-informational?style=flat-square)
 
 DNS proxy as ad-blocker for local network
 
@@ -18,7 +18,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -75,39 +75,18 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| args[0] | string | `"--config"` |  |
-| args[1] | string | `"/opt/adguardhome/conf/AdGuardHome.yaml"` |  |
-| args[2] | string | `"--work-dir"` |  |
-| args[3] | string | `"/opt/adguardhome/work"` |  |
-| args[4] | string | `"--no-check-update"` |  |
-| config | string | `"bind_host: 0.0.0.0\nbind_port: 3000\nbeta_bind_port: 0\nusers: []\nhttp_proxy: \"\"\nlanguage: en\nrlimit_nofile: 0\ndebug_pprof: false\nweb_session_ttl: 720\ndns:\n  bind_host: 0.0.0.0\n  port: 53\n  statistics_interval: 1\n  querylog_enabled: true\n  querylog_file_enabled: true\n  querylog_interval: 90\n  querylog_size_memory: 1000\n  anonymize_client_ip: false\n  protection_enabled: true\n  blocking_mode: default\n  blocking_ipv4: \"\"\n  blocking_ipv6: \"\"\n  blocked_response_ttl: 10\n  parental_block_host: family-block.dns.adguard.com\n  safebrowsing_block_host: standard-block.dns.adguard.com\n  ratelimit: 0\n  ratelimit_whitelist: []\n  refuse_any: true\n  upstream_dns:\n  - https://dns10.quad9.net/dns-query\n  upstream_dns_file: \"\"\n  bootstrap_dns:\n  - 9.9.9.10\n  - 149.112.112.10\n  - 2620:fe::10\n  - 2620:fe::fe:10\n  all_servers: false\n  fastest_addr: false\n  allowed_clients: []\n  disallowed_clients: []\n  blocked_hosts: []\n  cache_size: 4194304\n  cache_ttl_min: 0\n  cache_ttl_max: 0\n  bogus_nxdomain: []\n  aaaa_disabled: false\n  enable_dnssec: false\n  edns_client_subnet: false\n  max_goroutines: 300\n  ipset: []\n  filtering_enabled: true\n  filters_update_interval: 24\n  parental_enabled: false\n  safesearch_enabled: false\n  safebrowsing_enabled: false\n  safebrowsing_cache_size: 1048576\n  safesearch_cache_size: 1048576\n  parental_cache_size: 1048576\n  cache_time: 30\n  rewrites: []\n  blocked_services: []\n  customresolver: null\ntls:\n  enabled: false\n  server_name: \"\"\n  force_https: false\n  port_https: 443\n  port_dns_over_tls: 853\n  port_dns_over_quic: 784\n  port_dnscrypt: 0\n  dnscrypt_config_file: \"\"\n  allow_unencrypted_doh: false\n  strict_sni_check: false\n  certificate_chain: \"\"\n  private_key: \"\"\n  certificate_path: \"\"\n  private_key_path: \"\"\nfilters:\n- enabled: true\n  url: https://adguardteam.github.io/AdGuardSDNSFilter/Filters/filter.txt\n  name: AdGuard DNS filter\n  id: 1\n- enabled: false\n  url: https://adaway.org/hosts.txt\n  name: AdAway\n  id: 2\n- enabled: false\n  url: https://www.malwaredomainlist.com/hostslist/hosts.txt\n  name: MalwareDomainList.com Hosts List\n  id: 4\nwhitelist_filters: []\nuser_rules: []\ndhcp:\n  enabled: false\n  interface_name: \"\"\n  dhcpv4:\n    gateway_ip: \"\"\n    subnet_mask: \"\"\n    range_start: \"\"\n    range_end: \"\"\n    lease_duration: 86400\n    icmp_timeout_msec: 1000\n    options: []\n  dhcpv6:\n    range_start: \"\"\n    lease_duration: 86400\n    ra_slaac_only: false\n    ra_allow_slaac: false\nclients: []\nlog_compress: false\nlog_localtime: false\nlog_max_backups: 0\nlog_max_size: 100\nlog_max_age: 3\nlog_file: \"\"\nverbose: false\nschema_version: 7\n"` |  |
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"adguard/adguardhome"` |  |
-| image.tag | string | `"v0.105.2"` |  |
-| initContainers[0].command[0] | string | `"sh"` |  |
-| initContainers[0].command[1] | string | `"-c"` |  |
-| initContainers[0].command[2] | string | `"if [ ! -f /opt/adguardhome/conf/AdGuardHome.yaml ]; then\n  mkdir -p /opt/adguardhome/conf\n  cp /tmp/AdGuardHome.yaml /opt/adguardhome/conf/AdGuardHome.yaml\nfi\n"` |  |
-| initContainers[0].image | string | `"busybox"` |  |
-| initContainers[0].name | string | `"copy-configmap"` |  |
-| initContainers[0].securityContext.runAsUser | int | `0` |  |
-| initContainers[0].volumeMounts[0].mountPath | string | `"/tmp/AdGuardHome.yaml"` |  |
-| initContainers[0].volumeMounts[0].name | string | `"adguard-home-config"` |  |
-| initContainers[0].volumeMounts[0].subPath | string | `"AdGuardHome.yaml"` |  |
-| initContainers[0].volumeMounts[1].mountPath | string | `"/opt/adguardhome/conf"` |  |
-| initContainers[0].volumeMounts[1].name | string | `"config"` |  |
-| persistence.config.emptyDir.enabled | bool | `true` |  |
-| persistence.config.enabled | bool | `true` |  |
-| persistence.config.mountPath | string | `"/opt/adguardhome/conf"` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/opt/adguardhome/work"` |  |
-| prometheus.serviceMonitor.additionalLabels | object | `{}` |  |
-| prometheus.serviceMonitor.enabled | bool | `false` |  |
-| prometheus.serviceMonitor.interval | string | `"30s"` |  |
-| replicas | int | `1` | (int) Number of pods to load balance between |
-| service.port.port | int | `3000` |  |
-| strategy.type | string | `"Recreate"` |  |
+| args | list | `["--config","/opt/adguardhome/conf/AdGuardHome.yaml","--work-dir","/opt/adguardhome/work","--no-check-update"]` | arguments passed to the adguard-home command line. |
+| config | string | See values.yaml | AdGuard Home configuration. For a full list of options see https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration. |
+| controller.replicas | int | `1` | Number of pods to load balance between |
+| env | object | See below | environment variables. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"adguard/adguardhome"` | image repository |
+| image.tag | string | `"v0.106.3"` | image tag |
+| initContainers.copy-configmap | object | See values.yaml | Configures an initContainer that copies the configmap to the AdGuardHome conf directory It does NOT overwrite when the file already exists. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| prometheus.serviceMonitor | object | See values.yaml | Enable and configure a Prometheus serviceMonitor for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -115,6 +94,26 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.1]
+
+#### Fixed
+
+- Fixed the default protocol for the `dns-udp` port.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.0/charts/stable/common/) for the up-to-date values.
+- Updated the image tag to v0.106.3.
+
 ### [3.3.1]
 
 #### Changed
@@ -135,8 +134,11 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.3.1]: #3.3.1
-[3.0.0]: #3.0.0
+[5.0.0]: #500
+[4.0.1]: #401
+[4.0.0]: #400
+[3.3.1]: #331
+[3.0.0]: #300
 
 ## Support
 

charts/stable/adguard-home/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,26 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.1]
+
+#### Fixed
+
+- Fixed the default protocol for the `dns-udp` port.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.0/charts/stable/common/) for the up-to-date values.
+- Updated the image tag to v0.106.3.
+
 ### [3.3.1]
 
 #### Changed
@@ -29,6 +49,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.3.1]: #3.3.1
-[3.0.0]: #3.0.0
+[5.0.0]: #500
+[4.0.1]: #401
+[4.0.0]: #400
+[3.3.1]: #331
+[3.0.0]: #300
 {{- end -}}

charts/stable/adguard-home/ci/ct-values.yaml

@@ -1,11 +1,9 @@
 persistence:
   config:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /opt/adguardhome/conf
   data:
     enabled: true
-    emptyDir:
-      enabled: true
+    type: emptyDir
     mountPath: /opt/adguardhome/work

charts/stable/adguard-home/templates/common.yaml

@@ -1,31 +1,17 @@
 {{/* Make sure all variables are set properly */}}
 {{- include "common.values.setup" . }}
 
-{{/* Append the configMap to the additionalVolumes */}}
-{{- define "adguard-home.configmap.volume" -}}
-name: adguard-home-config
-configMap:
-  name: {{ template "common.names.fullname" . }}-config
-{{- end -}}
-
-{{- $volume := include "adguard-home.configmap.volume" . | fromYaml -}}
-{{- if $volume -}}
-    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
-    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
-{{- end -}}
-
-{{/* Append the configMap volume to the additionalVolumeMounts */}}
-{{- define "adguard-home.configmap.volumeMount" -}}
-name: adguard-home-config
-mountPath: /tmp/AdGuardHome.yaml
-subPath: AdGuardHome.yaml
-{{- end -}}
-
-{{- $volumeMount := include "adguard-home.configmap.volumeMount" . | fromYaml -}}
-{{- if $volumeMount -}}
-    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
-    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
+{{/* Append the configMap volume to the volumes */}}
+{{- define "adguard-home.configVolume" -}}
+enabled: "true"
+mountPath: "/tmp/AdGuardHome.yaml"
+subPath: "AdGuardHome.yaml"
+type: "custom"
+volumeSpec:
+  configMap:
+    name: {{ include "common.names.fullname" . }}-config
 {{- end -}}
+{{- $_ := set .Values.persistence "adguard-home-config" (include "adguard-home.configVolume" . | fromYaml) -}}
 
 {{/* Render the templates */}}
 {{ include "common.all" . }}

charts/stable/adguard-home/values.yaml

@@ -5,39 +5,48 @@
 # https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml
 #
 
-# Copy the configmap to the AdGuardHome conf directory
-# Do NOT overwrite when the file already exists
+controller:
+  # -- Number of pods to load balance between
+  replicas: 1
+
 initContainers:
-- name: copy-configmap
-  image: busybox
-  command:
-  - "sh"
-  - "-c"
-  - |
-    if [ ! -f /opt/adguardhome/conf/AdGuardHome.yaml ]; then
-      mkdir -p /opt/adguardhome/conf
-      cp /tmp/AdGuardHome.yaml /opt/adguardhome/conf/AdGuardHome.yaml
-    fi
-  volumeMounts:
-  - name: adguard-home-config
-    mountPath: /tmp/AdGuardHome.yaml
-    subPath: AdGuardHome.yaml
-  - name: config
-    mountPath: /opt/adguardhome/conf
-  securityContext:
-    runAsUser: 0
+# -- Configures an initContainer that copies the configmap to the AdGuardHome conf directory
+# It does NOT overwrite when the file already exists.
+# @default -- See values.yaml
+  copy-configmap:
+    image: busybox
+    command:
+    - "sh"
+    - "-c"
+    - |
+      if [ ! -f /opt/adguardhome/conf/AdGuardHome.yaml ]; then
+        mkdir -p /opt/adguardhome/conf
+        cp /tmp/AdGuardHome.yaml /opt/adguardhome/conf/AdGuardHome.yaml
+      fi
+    volumeMounts:
+    - name: adguard-home-config
+      mountPath: /tmp/AdGuardHome.yaml
+      subPath: AdGuardHome.yaml
+    - name: config
+      mountPath: /opt/adguardhome/conf
+    securityContext:
+      runAsUser: 0
 
 image:
+  # -- image repository
   repository: adguard/adguardhome
-  tag: v0.105.2
+  # -- image tag
+  tag: v0.106.3
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
+# -- environment variables.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- arguments passed to the adguard-home command line.
 args:
 - "--config"
 - "/opt/adguardhome/conf/AdGuardHome.yaml"
@@ -45,57 +54,48 @@ args:
 - "/opt/adguardhome/work"
 - "--no-check-update"
 
-# -- (int) Number of pods to load balance between
-replicas: 1
-
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 3000
-  # additionalServices:
-  # - enabled: true
-  #   nameSuffix: dns-tcp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-tcp
-  #     protocol: TCP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
-  # - enabled: true
-  #   nameSuffix: dns-udp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-udp
-  #     protocol: UDP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
+  main:
+    primary: true
+    ports:
+      http:
+        port: 3000
+  dns-tcp:
+    enabled: true
+    type: NodePort
+    ports:
+      dns-tcp:
+        enabled: true
+        port: 53
+        protocol: TCP
+        targetPort: 53
+    externalTrafficPolicy: Local
+  dns-udp:
+    enabled: true
+    type: NodePort
+    ports:
+      dns-udp:
+        enabled: true
+        port: 53
+        protocol: UDP
+        targetPort: 53
+    externalTrafficPolicy: Local
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: true
-    emptyDir:
-      enabled: true
     mountPath: /opt/adguardhome/conf
   data:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /opt/adguardhome/work
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
 prometheus:
+  # -- Enable and configure a Prometheus serviceMonitor for the chart under this key.
+  # @default -- See values.yaml
   serviceMonitor:
     enabled: false
     interval: 30s
@@ -105,20 +105,23 @@ prometheus:
 #   prometheus.io/scrape: "true"
 #   prometheus.io/port: "api"
 
-# -- Full list of options https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration
-# @default -- string
+# config -- AdGuard Home configuration. For a full list of options see https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration.
+# @default -- See values.yaml
 config: |
   bind_host: 0.0.0.0
   bind_port: 3000
   beta_bind_port: 0
   users: []
+  auth_attempts: 5
+  block_auth_min: 15
   http_proxy: ""
   language: en
   rlimit_nofile: 0
   debug_pprof: false
   web_session_ttl: 720
   dns:
-    bind_host: 0.0.0.0
+    bind_hosts:
+    - 0.0.0.0
     port: 53
     statistics_interval: 1
     querylog_enabled: true
@@ -169,7 +172,9 @@ config: |
     cache_time: 30
     rewrites: []
     blocked_services: []
-    customresolver: null
+    local_domain_name: lan
+    resolve_clients: true
+    local_ptr_upstreams: []
   tls:
     enabled: false
     server_name: ""
@@ -224,4 +229,4 @@ config: |
   log_max_age: 3
   log_file: ""
   verbose: false
-  schema_version: 7
+  schema_version: 10

charts/stable/airsonic/Chart.yaml

@@ -2,20 +2,21 @@ apiVersion: v2
 appVersion: 10.6.2
 description: Airsonic is a Free and Open Source community driven media server
 name: airsonic
-version: 3.0.1
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - airsonic
 home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/airsonic
 icon: https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/airsonic-logo.png
 sources:
-- https://github.com/airsonic/airsonic
-- https://github.com/linuxserver/docker-airsonic
+- https://github.com/airsonic-advanced/airsonic-advanced
 - https://github.com/k8s-at-home/charts/tree/master/charts/airsonic
 maintainers:
 - name: Patricol
   url: https://patricol.co/
+- name: bjw-s
+  email: me@bjw-s.dev
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 3.0.1
+  version: 4.0.0

charts/stable/airsonic/README.md

@@ -1,6 +1,6 @@
 # airsonic
 
-![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 10.6.2](https://img.shields.io/badge/AppVersion-10.6.2-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 10.6.2](https://img.shields.io/badge/AppVersion-10.6.2-informational?style=flat-square)
 
 Airsonic is a Free and Open Source community driven media server
 
@@ -8,8 +8,7 @@ Airsonic is a Free and Open Source community driven media server
 
 ## Source Code
 
-* <https://github.com/airsonic/airsonic>
-* <https://github.com/linuxserver/docker-airsonic>
+* <https://github.com/airsonic-advanced/airsonic-advanced>
 * <https://github.com/k8s-at-home/charts/tree/master/charts/airsonic>
 
 ## Requirements
@@ -20,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -79,17 +78,17 @@ by not constantly monitoring media folders.
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | See below | environment variables. See [image docs](https://docs.linuxserver.io/images/docker-airsonic#environment-variables-e) for more details. |
-| env.CONTEXT_PATH | string | `nil` | Used to set the base path for reverse proxies eg. /booksonic, /books, etc. |
+| enableServiceLinks | bool | `false` | Enable Kubernetes service links. Disabled by default, since AIRSONIC_* environment vars potentially clash with the application. |
+| env | object | See below | environment variables. |
+| env.CONTEXT_PATH | string | `nil` | Used to set the base path for reverse proxies eg. /airsonic, /music, etc. |
 | env.JAVA_OPTS | string | `nil` | For passing additional java options. For some reverse proxies, you may need to pass `JAVA_OPTS=-Dserver.use-forward-headers=true` for airsonic to generate the proper URL schemes. |
-| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
-| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
 | env.TZ | string | `"UTC"` | Set the container timezone |
 | image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
-| image.repository | string | `"linuxserver/airsonic"` | image repository |
-| image.tag | string | `"version-v10.6.2"` | image tag |
+| image.repository | string | `"airsonicadvanced/airsonic-advanced"` | image repository |
+| image.tag | string | `"latest@sha256:f7cbafac28063dce99b443037547b4fe40ae270b7bc5e47efea9bb5d6751ca9d"` | image tag The specific digest is for the `amd64` image, but arm compatible images are also available. |
 | ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
 | persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| probes | object | See values.yaml | Configures the probes for the main Pod. |
 | service | object | See values.yaml | Configures service settings for the chart. Normally this does not need to be modified. |
 
 ## Changelog
@@ -98,6 +97,22 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Changed image from linuxserver.io image to airsonic-advanced (https://github.com/airsonic-advanced/airsonic-advanced).
+
+#### Removed
+
+- Default values for `PGID` and `PUID` environment variables have been removed.
+
 ### [3.0.0]
 
 #### Changed
@@ -120,8 +135,10 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.0.0]: #3.0.0
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.0.0]: #400
+[3.0.0]: #300
+[1.0.0]: #100
 
 ## Support
 

charts/stable/airsonic/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,22 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Changed image from linuxserver.io image to airsonic-advanced (https://github.com/airsonic-advanced/airsonic-advanced).
+
+#### Removed
+
+- Default values for `PGID` and `PUID` environment variables have been removed.
+
 ### [3.0.0]
 
 #### Changed
@@ -31,6 +47,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[3.0.0]: #3.0.0
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.0.0]: #400
+[3.0.0]: #300
+[1.0.0]: #100
 {{- end -}}

charts/stable/airsonic/values.yaml

@@ -7,26 +7,27 @@
 
 image:
   # -- image repository
-  repository: linuxserver/airsonic
+  repository: airsonicadvanced/airsonic-advanced
   # -- image tag
-  tag: version-v10.6.2
+  # The specific digest is for the `amd64` image, but arm compatible images are also available.
+  tag: latest@sha256:f7cbafac28063dce99b443037547b4fe40ae270b7bc5e47efea9bb5d6751ca9d
   # -- image pull policy
   pullPolicy: IfNotPresent
 
-# -- environment variables. See [image docs](https://docs.linuxserver.io/images/docker-airsonic#environment-variables-e) for more details.
+# -- environment variables.
 # @default -- See below
 env:
   # -- Set the container timezone
   TZ: UTC
-  # -- Specify the user ID the application will run as
-  PUID: "1001"
-  # -- Specify the group ID the application will run as
-  PGID: "1001"
-  # -- Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+  # -- Used to set the base path for reverse proxies eg. /airsonic, /music, etc.
   CONTEXT_PATH:  # "url-base"
   # -- For passing additional java options. For some reverse proxies, you may need to pass `JAVA_OPTS=-Dserver.use-forward-headers=true` for airsonic to generate the proper URL schemes.
   JAVA_OPTS:
 
+# -- Enable Kubernetes service links.
+# Disabled by default, since AIRSONIC_* environment vars potentially clash with the application.
+enableServiceLinks: false
+
 # -- Configures service settings for the chart. Normally this does not need to be modified.
 # @default -- See values.yaml
 service:
@@ -58,3 +59,40 @@ persistence:
   media:
     enabled: false
     mountPath: /media
+
+# -- Configures the probes for the main Pod.
+# @default -- See values.yaml
+probes:
+  liveness:
+    enabled: true
+    custom: true
+    spec:
+      httpGet:
+        path: /rest/ping
+        port: http
+      initialDelaySeconds: 0
+      periodSeconds: 10
+      timeoutSeconds: 1
+      failureThreshold: 3
+  readiness:
+    enabled: true
+    custom: true
+    spec:
+      httpGet:
+        path: /rest/ping
+        port: http
+      initialDelaySeconds: 0
+      periodSeconds: 10
+      timeoutSeconds: 1
+      failureThreshold: 3
+  startup:
+    enabled: true
+    custom: true
+    spec:
+      httpGet:
+        path: /rest/ping
+        port: http
+      initialDelaySeconds: 0
+      periodSeconds: 5
+      timeoutSeconds: 1
+      failureThreshold: 30

charts/stable/alertmanager-bot/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.4.3
 description: Bot for Prometheus Alertmanager
 name: alertmanager-bot
-version: 5.0.0
+version: 6.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - alertmanager
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 3.0.1
+  version: 4.0.0

charts/stable/alertmanager-bot/README.md

@@ -1,6 +1,6 @@
 # alertmanager-bot
 
-![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: 0.4.3](https://img.shields.io/badge/AppVersion-0.4.3-informational?style=flat-square)
+![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: 0.4.3](https://img.shields.io/badge/AppVersion-0.4.3-informational?style=flat-square)
 
 Bot for Prometheus Alertmanager
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -94,6 +94,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
 ### [5.0.0]
 
 #### Changed
@@ -130,9 +136,10 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[5.0.0]: #5.0.0
-[4.3.2]: #4.3.2
-[1.0.0]: #1.0.0
+[6.0.0]: #600
+[5.0.0]: #500
+[4.3.2]: #432
+[1.0.0]: #100
 
 ## Support
 

charts/stable/alertmanager-bot/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
 ### [5.0.0]
 
 #### Changed
@@ -45,7 +51,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[5.0.0]: #5.0.0
-[4.3.2]: #4.3.2
-[1.0.0]: #1.0.0
+[6.0.0]: #600
+[5.0.0]: #500
+[4.3.2]: #432
+[1.0.0]: #100
 {{- end -}}

charts/stable/amcrest2mqtt/Chart.yaml

@@ -0,0 +1,19 @@
+apiVersion: v2
+appVersion: 1.0.5
+description: Expose all events from an Amcrest device to an MQTT broker
+name: amcrest2mqtt
+version: 2.0.0
+kubeVersion: ">=1.16.0-0"
+keywords:
+- amcrest2mqtt
+home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/amcrest2mqtt
+icon: https://raw.githubusercontent.com/k8s-at-home/organization/main/logo/k8s-at-home-400.png
+sources:
+- https://github.com/dchesterton/amcrest2mqtt
+maintainers:
+- name: bjw-s
+  email: me@bjw-s.dev
+dependencies:
+- name: common
+  repository: https://library-charts.k8s-at-home.com
+  version: 4.0.0

charts/stable/amcrest2mqtt/README.md

@@ -0,0 +1,124 @@
+# amcrest2mqtt
+
+![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: 1.0.5](https://img.shields.io/badge/AppVersion-1.0.5-informational?style=flat-square)
+
+Expose all events from an Amcrest device to an MQTT broker
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## Source Code
+
+* <https://github.com/dchesterton/amcrest2mqtt>
+
+## Requirements
+
+Kubernetes: `>=1.16.0-0`
+
+## Dependencies
+
+| Repository | Name | Version |
+|------------|------|---------|
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
+
+## TL;DR
+
+```console
+helm repo add k8s-at-home https://k8s-at-home.com/charts/
+helm repo update
+helm install amcrest2mqtt k8s-at-home/amcrest2mqtt
+```
+
+## Installing the Chart
+
+To install the chart with the release name `amcrest2mqtt`
+
+```console
+helm install amcrest2mqtt k8s-at-home/amcrest2mqtt
+```
+
+## Uninstalling the Chart
+
+To uninstall the `amcrest2mqtt` deployment
+
+```console
+helm uninstall amcrest2mqtt
+```
+
+The command removes all the Kubernetes components associated with the chart **including persistent volumes** and deletes the release.
+
+## Configuration
+
+Read through the [values.yaml](./values.yaml) file. It has several commented out suggested values.
+Other values may be used from the [values.yaml](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common).
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
+
+```console
+helm install amcrest2mqtt \
+  --set env.TZ="America/New York" \
+    k8s-at-home/amcrest2mqtt
+```
+
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
+
+```console
+helm install amcrest2mqtt k8s-at-home/amcrest2mqtt -f values.yaml
+```
+
+## Custom configuration
+
+N/A
+
+## Values
+
+**Important**: When deploying an application Helm chart you can add more values from our common library chart [here](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common)
+
+| Key | Type | Default | Description |
+|-----|------|---------|-------------|
+| env | object | See below | environment variables. See more environment variables in the [amcrest2mqtt repo](https://github.com/dchesterton/amcrest2mqtt). |
+| env.AMCREST_HOST | string | `nil` | Host name used to connect to the Amcrest device |
+| env.AMCREST_PASSWORD | string | `nil` | Password used to connect to the Amcrest device |
+| env.AMCREST_PORT | int | `80` | Port used to connect to the Amcrest device |
+| env.AMCREST_USERNAME | string | `nil` | User name used to connect to the Amcrest device |
+| env.HOME_ASSISTANT | string | `"false"` | Enable Home Assistant autodiscovery |
+| env.HOME_ASSISTANT_PREFIX | string | `"homeassistant"` | Home Assistant autodiscovery prefix |
+| env.MQTT_HOST | int | `1883` | Host name used to connect to the MQTT broker |
+| env.MQTT_PASSWORD | string | `nil` | Password used to connect to the MQTT broker |
+| env.MQTT_PORT | string | `nil` | Port used to connect to the MQTT broker |
+| env.MQTT_USERNAME | string | `nil` | User name used to connect to the MQTT broker |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"dchesterton/amcrest2mqtt"` | image repository |
+| image.tag | string | `"1.0.9"` | image tag |
+
+## Changelog
+
+All notable changes to this application Helm chart will be documented in this file but does not include changes from our common library. To read those click [here](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common#changelog).
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+### [2.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+- Changed the image tag to `1.0.9`.
+
+### [1.0.0]
+
+#### Added
+
+- Initial version
+
+[2.0.0]: #200
+[1.0.0]: #100
+
+## Support
+
+- See the [Docs](https://docs.k8s-at-home.com/our-helm-charts/getting-started/)
+- Open an [issue](https://github.com/k8s-at-home/charts/issues/new/choose)
+- Ask a [question](https://github.com/k8s-at-home/organization/discussions)
+- Join our [Discord](https://discord.gg/sTMX7Vh) community
+
+----------------------------------------------
+Autogenerated from chart metadata using [helm-docs v1.5.0](https://github.com/norwoodj/helm-docs/releases/v1.5.0)

charts/stable/amcrest2mqtt/README_CHANGELOG.md.gotmpl

@@ -0,0 +1,27 @@
+{{- define "custom.changelog.header" -}}
+## Changelog
+{{- end -}}
+
+{{- define "custom.changelog" -}}
+{{ template "custom.changelog.header" . }}
+
+All notable changes to this application Helm chart will be documented in this file but does not include changes from our common library. To read those click [here](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common#changelog).
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+### [2.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+- Changed the image tag to `1.0.9`.
+
+### [1.0.0]
+
+#### Added
+
+- Initial version
+
+[2.0.0]: #200
+[1.0.0]: #100
+{{- end -}}

charts/stable/amcrest2mqtt/templates/common.yaml

@@ -0,0 +1,25 @@
+{{/* Make sure all variables are set properly */}}
+{{- include "common.values.setup" . }}
+
+{{/* Append the hardcoded settings */}}
+{{- define "amcrest2mqtt.hardcodedValues" -}}
+service:
+  main:
+    enabled: false
+
+ingress:
+  main:
+    enabled: false
+
+probes:
+  liveness:
+    enabled: false
+  readiness:
+    enabled: false
+  startup:
+    enabled: false
+{{- end -}}
+{{- $_ := mergeOverwrite .Values (include "amcrest2mqtt.hardcodedValues" . | fromYaml) -}}
+
+{{/* Render the templates */}}
+{{ include "common.all" . }}

charts/stable/amcrest2mqtt/values.yaml

@@ -0,0 +1,40 @@
+#
+# IMPORTANT NOTE
+#
+# This chart inherits from our common library chart. You can check the default values/options here:
+# https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml
+#
+
+image:
+  # -- image repository
+  repository: dchesterton/amcrest2mqtt
+  # -- image tag
+  tag: 1.0.9
+  # -- image pull policy
+  pullPolicy: IfNotPresent
+
+# -- environment variables. See more environment variables in the [amcrest2mqtt repo](https://github.com/dchesterton/amcrest2mqtt).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Host name used to connect to the Amcrest device
+  AMCREST_HOST:
+  # -- Port used to connect to the Amcrest device
+  AMCREST_PORT: 80
+  # -- User name used to connect to the Amcrest device
+  AMCREST_USERNAME:
+  # -- Password used to connect to the Amcrest device
+  AMCREST_PASSWORD:
+  # -- Host name used to connect to the MQTT broker
+  MQTT_HOST: 1883
+  # -- Port used to connect to the MQTT broker
+  MQTT_PORT:
+  # -- User name used to connect to the MQTT broker
+  MQTT_USERNAME:
+  # -- Password used to connect to the MQTT broker
+  MQTT_PASSWORD:
+  # -- Enable Home Assistant autodiscovery
+  HOME_ASSISTANT: "false"
+  # -- Home Assistant autodiscovery prefix
+  HOME_ASSISTANT_PREFIX: "homeassistant"

charts/stable/apache-musicindex/Chart.yaml

@@ -0,0 +1,22 @@
+apiVersion: v2
+appVersion: v1.4.1-2
+description: Index and stream music using apache-musicindex and m3u playlists
+name: apache-musicindex
+version: 2.0.0
+kubeVersion: ">=1.16.0-0"
+keywords:
+- apache-musicindex
+- streaming
+- m3u
+- playlist
+home: https://github.com/k8s-at-home/charts/tree/master/charts/stable/apache-musicindex
+icon: https://en.wikipedia.org/wiki/Apache_HTTP_Server#/media/File:Apache_HTTP_server_logo_(2019-present).svg
+sources:
+- http://hacks.slashdirt.org/sw/musicindex/
+maintainers:
+- name: angelnu
+  email: git@angelnu.com
+dependencies:
+- name: common
+  repository: https://library-charts.k8s-at-home.com
+  version: 4.0.0

charts/stable/apache-musicindex/README.md

@@ -1,14 +1,14 @@
-# zwave2mqtt
+# apache-musicindex
 
-![Version: 8.4.0](https://img.shields.io/badge/Version-8.4.0-informational?style=flat-square) ![AppVersion: 4.0.6](https://img.shields.io/badge/AppVersion-4.0.6-informational?style=flat-square)
+![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: v1.4.1-2](https://img.shields.io/badge/AppVersion-v1.4.1--2-informational?style=flat-square)
 
-Fully configurable Zwave to MQTT gateway and Control Panel using NodeJS and Vue
+Index and stream music using apache-musicindex and m3u playlists
 
 **This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
 
 ## Source Code
 
-* <https://github.com/OpenZWave/Zwave2Mqtt>
+* <http://hacks.slashdirt.org/sw/musicindex/>
 
 ## Requirements
 
@@ -18,30 +18,30 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
 ```console
 helm repo add k8s-at-home https://k8s-at-home.com/charts/
 helm repo update
-helm install zwave2mqtt k8s-at-home/zwave2mqtt
+helm install apache-musicindex k8s-at-home/apache-musicindex
 ```
 
 ## Installing the Chart
 
-To install the chart with the release name `zwave2mqtt`
+To install the chart with the release name `apache-musicindex`
 
 ```console
-helm install zwave2mqtt k8s-at-home/zwave2mqtt
+helm install apache-musicindex k8s-at-home/apache-musicindex
 ```
 
 ## Uninstalling the Chart
 
-To uninstall the `zwave2mqtt` deployment
+To uninstall the `apache-musicindex` deployment
 
 ```console
-helm uninstall zwave2mqtt
+helm uninstall apache-musicindex
 ```
 
 The command removes all the Kubernetes components associated with the chart **including persistent volumes** and deletes the release.
@@ -54,49 +54,27 @@ Other values may be used from the [values.yaml](https://github.com/k8s-at-home/l
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
 
 ```console
-helm install zwave2mqtt \
+helm install apache-musicindex \
   --set env.TZ="America/New York" \
-    k8s-at-home/zwave2mqtt
+    k8s-at-home/apache-musicindex
 ```
 
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
 
 ```console
-helm install zwave2mqtt k8s-at-home/zwave2mqtt -f values.yaml
+helm install apache-musicindex k8s-at-home/apache-musicindex -f values.yaml
 ```
 
 ## Custom configuration
 
-**IMPORTANT NOTE:** a zwave controller device must be accessible on the node where this pod runs, in order for this chart to function properly.
+### Matching pors
 
-First, you will need to mount your zwave device into the pod, you can do so by adding the following to your values:
+You need to ensure that the ingress and service ports match
+or you will not be able to stream.
 
-```yaml
-additionalVolumeMounts:
-  - name: usb
-    mountPath: /path/to/device
-
-additionalVolumes:
-  - name: usb
-    hostPath:
-      path: /path/to/device
-```
-
-Second you will need to set a nodeAffinity rule, for example:
-
-```yaml
-affinity:
-  nodeAffinity:
-    requiredDuringSchedulingIgnoredDuringExecution:
-      nodeSelectorTerms:
-      - matchExpressions:
-        - key: app
-          operator: In
-          values:
-          - zwave-controller
-```
-
-... where a node with an attached zwave controller USB device is labeled with `app: zwave-controller`
+This is because the apache-musicindex will use the schema and
+port from the incomming request to generate the URL in the
+playlist.m3u.
 
 ## Values
 
@@ -104,21 +82,13 @@ affinity:
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| additionalVolumeMounts | list | `[]` |  |
-| additionalVolumes | list | `[]` |  |
-| env.OZW_AUTO_UPDATE_CONFIG | bool | `true` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"robertslando/zwave2mqtt"` |  |
-| image.tag | string | `"4.0.6"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/usr/src/app/store"` |  |
-| probes.liveness.enabled | bool | `true` |  |
-| probes.readiness.enabled | bool | `true` |  |
-| probes.startup.enabled | bool | `false` |  |
-| service.port.port | int | `8091` |  |
-| strategy.type | string | `"Recreate"` |  |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/k8s-at-home/apache-musicindex"` | image repository |
+| image.tag | string | `"v1.4.1-2"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| securityContext | object | See values.yaml | Allows to start web server on ports 80 and 443 |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -126,25 +96,23 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [8.3.2]
-
-#### Added
-
-- N/A
+### [2.0.0]
 
 #### Changed
 
-- Updated icon url.
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [1.0.1]
 
-- N/A
+#### Changed
+
+- Fixes streamin - use standard ports to match ingress ports
 
 ### [1.0.0]
 
 #### Added
 
-- N/A
+- Initial version
 
 #### Changed
 
@@ -154,7 +122,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[8.3.2]: #832
+[2.0.0]: #200
+[1.0.1]: #101
 [1.0.0]: #100
 
 ## Support

charts/stable/apache-musicindex/README_CHANGELOG.md.gotmpl

@@ -0,0 +1,41 @@
+{{- define "custom.changelog.header" -}}
+## Changelog
+{{- end -}}
+
+{{- define "custom.changelog" -}}
+{{ template "custom.changelog.header" . }}
+
+All notable changes to this application Helm chart will be documented in this file but does not include changes from our common library. To read those click [here](https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common#changelog).
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+### [2.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [1.0.1]
+
+#### Changed
+
+- Fixes streamin - use standard ports to match ingress ports
+
+### [1.0.0]
+
+#### Added
+
+- Initial version
+
+#### Changed
+
+- N/A
+
+#### Removed
+
+- N/A
+
+[2.0.0]: #200
+[1.0.1]: #101
+[1.0.0]: #100
+{{- end -}}

charts/stable/apache-musicindex/README_CONFIG.md.gotmpl

@@ -0,0 +1,17 @@
+{{- define "custom.custom.configuration.header" -}}
+## Custom configuration
+{{- end -}}
+
+{{- define "custom.custom.configuration" -}}
+{{ template "custom.custom.configuration.header" . }}
+
+### Matching pors
+
+You need to ensure that the ingress and service ports match
+or you will not be able to stream.
+
+This is because the apache-musicindex will use the schema and
+port from the incomming request to generate the URL in the
+playlist.m3u.
+
+{{- end -}}

charts/stable/apache-musicindex/values.yaml

@@ -0,0 +1,54 @@
+#
+# IMPORTANT NOTE
+#
+# This chart inherits from our common library chart. You can check the default values/options here:
+# https://github.com/k8s-at-home/library-charts/tree/main/charts/stable/common/values.yaml
+#
+
+image:
+  # -- image repository
+  repository: ghcr.io/k8s-at-home/apache-musicindex
+  # -- image tag
+  tag: v1.4.1-2
+  # -- image pull policy
+  pullPolicy: IfNotPresent
+
+# -- Allows to start web server on ports 80 and 443
+# @default -- See values.yaml
+securityContext:
+  capabilities:
+    add: ["CAP_NET_BIND_SERVICE"]
+
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
+service:
+  main:
+    ports:
+      http:
+        primary: false
+        port: 80
+      https:
+        enabled: true
+        primary: true
+        port: 443
+        protocol: HTTPS
+
+ingress:
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
+    # If you use https as the backend, you need to enable tell your ingress
+    # annotations:
+    #  nginx.ingress.kubernetes.io/backend-protocol: "HTTPS"
+    #  ingress.kubernetes.io/protocol: https
+
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
+persistence:
+  music:
+    enabled: false
+    mountPath: /music
+  cache:
+    enabled: false
+    mountPath: /cache

charts/stable/appdaemon/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.0.8
 description: AppDaemon is a loosely coupled, multi-threaded, sandboxed python execution environment for writing automation apps for various types of Home Automation Software including Home Assistant and MQTT.
 name: appdaemon
-version: 6.0.0
+version: 8.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - appdaemon
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/appdaemon/README.md

@@ -1,6 +1,6 @@
 # appdaemon
 
-![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: 4.0.8](https://img.shields.io/badge/AppVersion-4.0.8-informational?style=flat-square)
+![Version: 8.0.0](https://img.shields.io/badge/Version-8.0.0-informational?style=flat-square) ![AppVersion: 4.0.8](https://img.shields.io/badge/AppVersion-4.0.8-informational?style=flat-square)
 
 AppDaemon is a loosely coupled, multi-threaded, sandboxed python execution environment for writing automation apps for various types of Home Automation Software including Home Assistant and MQTT.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -76,16 +76,13 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"acockburn/appdaemon"` |  |
-| image.tag | string | `"4.0.8"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/conf"` |  |
-| service.port.port | int | `5050` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See [image docs](https://appdaemon.readthedocs.io/en/latest/DOCKER_TUTORIAL.html) for more details. |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"acockburn/appdaemon"` | image repository |
+| image.tag | string | `"4.0.8"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -93,6 +90,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [8.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [7.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [6.0.0]
 
 #### Added
@@ -135,6 +145,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[8.0.0]: #800
+[7.0.0]: #700
+[6.0.0]: #600
 [5.0.1]: #501
 [1.0.0]: #100
 

charts/stable/appdaemon/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [8.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [7.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [6.0.0]
 
 #### Added
@@ -51,6 +64,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[8.0.0]: #800
+[7.0.0]: #700
+[6.0.0]: #600
 [5.0.1]: #501
 [1.0.0]: #100
 {{- end -}}

charts/stable/appdaemon/ci/ct-values.yaml

@@ -5,4 +5,5 @@ env:
   ELEVATION: "64"
   DASH_URL: "http://0.0.0.0:5050"
 ingress:
-  enabled: true
+  main:
+    enabled: true

charts/stable/appdaemon/values.yaml

@@ -6,21 +6,17 @@
 #
 
 image:
+  # -- image repository
   repository: acockburn/appdaemon
-  pullPolicy: IfNotPresent
+  # -- image tag
   tag: 4.0.8
+  # -- image pull policy
+  pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-service:
-  port:
-    port: 5050
-
-# Environment variables that can be configure can be seen at
-# https://appdaemon.readthedocs.io/en/latest/DOCKER_TUTORIAL.html
-env: {}
-  # TZ:
+# -- environment variables. See [image docs](https://appdaemon.readthedocs.io/en/latest/DOCKER_TUTORIAL.html) for more details.
+# @default -- See below
+env:
+  TZ: UTC
   # LATITUDE:
   # LONGITUDE:
   # ELEVATION:
@@ -28,12 +24,23 @@ env: {}
   # DASH_URL:
   # TOKEN:
 
-ingress:
-  enabled: false
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
+service:
+  main:
+    ports:
+      http:
+        port: 5050
 
+ingress:
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
+
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /conf

charts/stable/baikal/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.8.0
 description: Baïkal is a lightweight CalDAV+CardDAV server. It offers a web interface with management of users, address books and calendars.
 name: baikal
-version: 1.3.1
+version: 3.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - baikal
@@ -21,8 +21,8 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0
 - name: mariadb
-  version: 9.3.13
+  version: 9.3.19
   repository: https://charts.bitnami.com/bitnami
   condition: mariadb.enabled

charts/stable/baikal/README.md

@@ -1,6 +1,6 @@
 # baikal
 
-![Version: 1.3.1](https://img.shields.io/badge/Version-1.3.1-informational?style=flat-square) ![AppVersion: 0.8.0](https://img.shields.io/badge/AppVersion-0.8.0-informational?style=flat-square)
+![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: 0.8.0](https://img.shields.io/badge/AppVersion-0.8.0-informational?style=flat-square)
 
 Baïkal is a lightweight CalDAV+CardDAV server. It offers a web interface with management of users, address books and calendars.
 
@@ -19,8 +19,8 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://charts.bitnami.com/bitnami | mariadb | 9.3.13 |
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://charts.bitnami.com/bitnami | mariadb | 9.3.19 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -77,26 +77,15 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"ckulka/baikal"` |  |
-| image.tag | string | `"0.8.0"` | Image tag. For available image variants see https://github.com/ckulka/baikal-docker#image-variants |
-| ingress.enabled | bool | `false` |  |
-| mariadb.architecture | string | `"standalone"` |  |
-| mariadb.auth.database | string | `"baikal"` |  |
-| mariadb.auth.password | string | `"baikal"` |  |
-| mariadb.auth.rootPassword | string | `"baikal-rootpass"` |  |
-| mariadb.auth.username | string | `"baikal"` |  |
-| mariadb.enabled | bool | `false` |  |
-| mariadb.primary.persistence.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/var/www/baikal/config"` |  |
-| persistence.data.emptyDir.enabled | bool | `false` |  |
-| persistence.data.enabled | bool | `false` |  |
-| persistence.data.mountPath | string | `"/var/www/baikal/Specific"` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See [image repo](https://github.com/ckulka/baikal-docker) for more details. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ckulka/baikal"` | image repository |
+| image.tag | string | `"0.8.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| mariadb | object | See values.yaml | Enable and configure mariadb database subchart under this key.    For more options see [mariadb chart documentation](https://github.com/bitnami/charts/tree/master/bitnami/mariadb) |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -104,13 +93,28 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [2.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [1.0.0]
 
 #### Added
 
 - Initial version
 
-[1.0.0]: #1.0.0
+[3.0.0]: #300
+[2.0.0]: #200
+[1.0.0]: #100
 
 ## Support
 

charts/stable/baikal/README_CHANGELOG.md.gotmpl

@@ -9,11 +9,26 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [2.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [1.0.0]
 
 #### Added
 
 - Initial version
 
-[1.0.0]: #1.0.0
+[3.0.0]: #300
+[2.0.0]: #200
+[1.0.0]: #100
 {{- end -}}

charts/stable/baikal/values.yaml

@@ -6,50 +6,46 @@
 #
 
 image:
+  # -- image repository
   repository: ckulka/baikal
-  pullPolicy: IfNotPresent
-  # -- Image tag. For available image variants see https://github.com/ckulka/baikal-docker#image-variants
+  # -- image tag
   tag: 0.8.0
+  # -- image pull policy
+  pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
+# -- environment variables. See [image repo](https://github.com/ckulka/baikal-docker) for more details.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
+  main:
+    ports:
+      http:
+        port: 80
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /var/www/baikal/config
   data:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /var/www/baikal/Specific
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
-# Enables mariadb
-# ... for configuration options see https://github.com/bitnami/charts/tree/master/bitnami/mariadb
+# -- Enable and configure mariadb database subchart under this key.
+#    For more options see [mariadb chart documentation](https://github.com/bitnami/charts/tree/master/bitnami/mariadb)
+# @default -- See values.yaml
 mariadb:
   enabled: false
   architecture: standalone

charts/stable/bazarr/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v0.9.4
+appVersion: v0.9.5
 description: Bazarr is a companion application to Sonarr and Radarr. It manages and downloads subtitles based on your requirements
 name: bazarr
-version: 8.1.0
+version: 10.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - bazarr
@@ -22,4 +22,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/bazarr/README.md

@@ -1,6 +1,6 @@
 # bazarr
 
-![Version: 8.1.0](https://img.shields.io/badge/Version-8.1.0-informational?style=flat-square) ![AppVersion: v0.9.4](https://img.shields.io/badge/AppVersion-v0.9.4-informational?style=flat-square)
+![Version: 10.0.0](https://img.shields.io/badge/Version-10.0.0-informational?style=flat-square) ![AppVersion: v0.9.5](https://img.shields.io/badge/AppVersion-v0.9.5-informational?style=flat-square)
 
 Bazarr is a companion application to Sonarr and Radarr. It manages and downloads subtitles based on your requirements
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -76,18 +76,14 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"ghcr.io/k8s-at-home/bazarr"` |  |
-| image.tag | string | `"v0.9.4"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.media.emptyDir.enabled | bool | `false` |  |
-| persistence.media.enabled | bool | `false` |  |
-| persistence.media.mountPath | string | `"/media"` |  |
-| service.port.port | int | `6767` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/k8s-at-home/bazarr"` | image repository |
+| image.tag | string | `"v0.9.5"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -95,6 +91,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [10.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [9.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v0.9.5`.
+
 ### [8.0.0]
 
 #### Changed
@@ -115,8 +125,10 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[8.0.0]: #8.0.0
-[1.0.0]: #1.0.0
+[10.0.0]: #1000
+[9.0.0]: #900
+[8.0.0]: #800
+[1.0.0]: #100
 
 ## Support
 

charts/stable/bazarr/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [10.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [9.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v0.9.5`.
+
 ### [8.0.0]
 
 #### Changed
@@ -29,6 +43,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[8.0.0]: #8.0.0
-[1.0.0]: #1.0.0
+[10.0.0]: #1000
+[9.0.0]: #900
+[8.0.0]: #800
+[1.0.0]: #100
 {{- end -}}

charts/stable/bazarr/values.yaml

@@ -6,43 +6,39 @@
 #
 
 image:
+  # -- image repository
   repository: ghcr.io/k8s-at-home/bazarr
+  # -- image tag
+  tag: v0.9.5
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v0.9.4
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
+# -- environment variables.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 6767
+  main:
+    ports:
+      http:
+        port: 6767
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
 
   media:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /media
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""

charts/stable/blocky/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v0.13
+appVersion: v0.14
 description: DNS proxy as ad-blocker for local network
 name: blocky
-version: 6.4.0
+version: 8.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - blocky
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/blocky/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [8.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [7.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `v0.14`.
+
 ### [6.0.0]
 
 #### Added
@@ -23,5 +37,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[6.0.0]: #6.0.0
+[8.0.0]: #800
+[7.0.0]: #700
+[6.0.0]: #600
 {{- end -}}

charts/stable/blocky/templates/common.yaml

@@ -1,31 +1,19 @@
 {{/* Make sure all variables are set properly */}}
 {{- include "common.values.setup" . }}
 
-{{/* Append the configMap to the additionalVolumes */}}
-{{- define "blocky.configmap.volume" -}}
-name: blocky-config
-configMap:
-  name: {{ template "common.names.fullname" . }}-config
-{{- end -}}
-
-{{- $volume := include "blocky.configmap.volume" . | fromYaml -}}
-{{- if $volume -}}
-    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
-    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
-{{- end -}}
-
-{{/* Append the configMap volume to the additionalVolumeMounts */}}
-{{- define "blocky.configmap.volumeMount" -}}
-name: blocky-config
-mountPath: /app/config.yml
-subPath: config.yml
-{{- end -}}
-
-{{- $volumeMount := include "blocky.configmap.volumeMount" . | fromYaml -}}
-{{- if $volumeMount -}}
-    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
-    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
+{{/* Append the hardcoded settings */}}
+{{- define "blocky.hardcodedValues" -}}
+persistence:
+  blocky-config:
+    enabled: "true"
+    mountPath: "/app/config.yml"
+    subPath: "config.yml"
+    type: "custom"
+    volumeSpec:
+      configMap:
+        name: {{ printf "%v-config" (include "common.names.fullname" .) }}
 {{- end -}}
+{{- $_ := mergeOverwrite .Values (include "blocky.hardcodedValues" . | fromYaml) -}}
 
 {{/* Render the templates */}}
 {{ include "common.all" . }}

charts/stable/blocky/templates/configmap.yaml

@@ -1,9 +1,9 @@
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: {{ template "common.names.fullname" . }}-config
+  name: {{ include "common.names.fullname" . }}-config
   labels:
     {{- include "common.labels" . | nindent 4 }}
 data:
   config.yml: |
-{{ .Values.config | indent 4 }}
+    {{- .Values.config | nindent 4 }}

charts/stable/blocky/values.yaml

@@ -6,70 +6,69 @@
 #
 
 image:
+  # -- image repository
   repository: spx01/blocky
-  tag: v0.13
+  # -- image tag
+  tag: v0.14
+  # -- image pull policy
   pullPolicy: IfNotPresent
 
-strategy:
-  type: RollingUpdate
+controller:
+  # -- Set the controller upgrade strategy
+  strategy: RollingUpdate
+  # -- (int) Number of pods to load balance between
+  replicas: 1
 
-env: {}
-  # TZ:
-
-# -- (int) Number of pods to load balance between
-replicas: 1
+# -- environment variables. See [image docs](https://0xerr0r.github.io/blocky/installation/#run-with-docker) for more details.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 4000
-  # additionalServices:
-  # - enabled: true
-  #   nameSuffix: dns-tcp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-tcp
-  #     protocol: TCP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
-  # - enabled: true
-  #   nameSuffix: dns-udp
-  #   type: NodePort
-  #   port:
-  #     port: 53
-  #     name: dns-udp
-  #     protocol: UDP
-  #     targetPort: 53
-  #   externalTrafficPolicy: Local
+  main:
+    ports:
+      http:
+        port: 4000
+  dns-tcp:
+    enabled: false
+    type: ClusterIP
+    externalTrafficPolicy: Local
+    ports:
+      dns-tcp:
+        enabled: true
+        port: 53
+        protocol: TCP
+        targetPort: 53
+  dns-udp:
+    enabled: false
+    type: ClusterIP
+    externalTrafficPolicy: Local
+    ports:
+      dns-udp:
+        enabled: true
+        port: 53
+        protocol: UDP
+        targetPort: 53
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   logs:
     enabled: false
-    emptyDir: false
     mountPath: /logs
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
 
 prometheus:
+  # -- Enable and configure a Prometheus serviceMonitor for the chart under this key.
+  # See also the notes under `additionalContainers`.
+  # @default -- See values.yaml
   serviceMonitor:
     enabled: false
     interval: 30s
     additionalLabels: {}
 
-# podAnnotations:
-#   prometheus.io/scrape: "true"
-#   prometheus.io/port: "api"
-
 # -- Full list of options https://github.com/0xERR0R/blocky/blob/master/docs/config.yml
 # @default -- see URL to default config
 config: |

charts/stable/booksonic-air/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2009.1.0
 description: Booksonic is a platform for accessing the audibooks you own wherever you are
 name: booksonic-air
-version: 4.4.0
+version: 6.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - booksonic
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/booksonic-air/README.md

@@ -1,6 +1,6 @@
 # booksonic-air
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: v2009.1.0](https://img.shields.io/badge/AppVersion-v2009.1.0-informational?style=flat-square)
+![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: v2009.1.0](https://img.shields.io/badge/AppVersion-v2009.1.0-informational?style=flat-square)
 
 Booksonic is a platform for accessing the audibooks you own wherever you are
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -78,24 +78,15 @@ by not constantly monitoring media folders.
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/booksonic-air"` |  |
-| image.tag | string | `"v2009.1.0-ls2"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.audiobooks.emptyDir.enabled | bool | `false` |  |
-| persistence.audiobooks.enabled | bool | `false` |  |
-| persistence.audiobooks.mountPath | string | `"/audiobooks"` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.othermedia.emptyDir.enabled | bool | `false` |  |
-| persistence.othermedia.enabled | bool | `false` |  |
-| persistence.othermedia.mountPath | string | `"/othermedia"` |  |
-| persistence.podcasts.emptyDir.enabled | bool | `false` |  |
-| persistence.podcasts.enabled | bool | `false` |  |
-| persistence.podcasts.mountPath | string | `"/podcasts"` |  |
-| service.port.port | int | `4040` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"ghcr.io/linuxserver/booksonic-air"` | image repository |
+| image.tag | string | `"version-v2009.1.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -103,21 +94,23 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [6.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [5.0.0]
 
-- N/A
+#### Changed
 
-[1.0.0]: #1.0.0
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v2009.1.0`
+- Changed image repository to `ghcr.io/linuxserver/booksonic-air`
+
+[6.0.0]: #600
+[5.0.0]: #500
 
 ## Support
 

charts/stable/booksonic-air/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,21 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [6.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [5.0.0]
 
-- N/A
+#### Changed
 
-[1.0.0]: #1.0.0
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v2009.1.0`
+- Changed image repository to `ghcr.io/linuxserver/booksonic-air`
+
+[6.0.0]: #600
+[5.0.0]: #500
 {{- end -}}

charts/stable/booksonic-air/values.yaml

@@ -6,56 +6,47 @@
 #
 
 image:
-  repository: linuxserver/booksonic-air
+  # -- image repository
+  repository: ghcr.io/linuxserver/booksonic-air
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: v2009.1.0-ls2
+  # -- image tag
+  tag: version-v2009.1.0
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ: UTC
-  # PUID: "1001"
-  # PGID: "1001"
-  # CONTEXT_PATH=url-base # Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+# See more environment variables in the [booksonic-air documentation](https://github.com/linuxserver/docker-booksonic-air#parameters)
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1001"
+  # -- Specify the group ID the application will run as
+  PGID: "1001"
+  # -- Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+  # CONTEXT_PATH=url-base
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 4040
+  main:
+    ports:
+      http:
+        port: 4040
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-
   audiobooks:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /audiobooks
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
   podcasts:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /podcasts
   othermedia:
     enabled: false
-    emptyDir:
-      enabled: false
-    mountPath: /othermedia

charts/stable/bookstack/Chart.yaml

@@ -3,7 +3,7 @@ apiVersion: v2
 appVersion: v21.05.1
 description: A simple, self-hosted, easy-to-use platform for organising and storing information.
 name: bookstack
-version: 2.0.0
+version: 3.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
   - bookstack
@@ -23,8 +23,8 @@ maintainers:
 dependencies:
   - name: common
     repository: https://library-charts.k8s-at-home.com
-    version: 3.0.1
+    version: 4.0.0
   - name: mariadb
-    version: 9.3.13
+    version: 9.3.19
     repository: https://charts.bitnami.com/bitnami
     condition: mariadb.enabled

charts/stable/bookstack/README.md

@@ -1,6 +1,6 @@
 # bookstack
 
-![Version: 2.0.0](https://img.shields.io/badge/Version-2.0.0-informational?style=flat-square) ![AppVersion: v21.05.1](https://img.shields.io/badge/AppVersion-v21.05.1-informational?style=flat-square)
+![Version: 3.0.0](https://img.shields.io/badge/Version-3.0.0-informational?style=flat-square) ![AppVersion: v21.05.1](https://img.shields.io/badge/AppVersion-v21.05.1-informational?style=flat-square)
 
 A simple, self-hosted, easy-to-use platform for organising and storing information.
 
@@ -19,8 +19,8 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://charts.bitnami.com/bitnami | mariadb | 9.3.13 |
-| https://library-charts.k8s-at-home.com | common | 3.0.1 |
+| https://charts.bitnami.com/bitnami | mariadb | 9.3.19 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -93,6 +93,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
 ### [2.0.0]
 
 #### Changed
@@ -115,6 +121,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[3.0.0]: #300
 [2.0.0]: #200
 [1.0.0]: #100
 

charts/stable/bookstack/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,12 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [3.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
 ### [2.0.0]
 
 #### Changed
@@ -31,6 +37,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
+[3.0.0]: #300
 [2.0.0]: #200
 [1.0.0]: #100
 {{- end -}}

charts/stable/calibre-web/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 0.6.9
+appVersion: 0.6.12
 description: Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database.
 name: calibre-web
-version: 6.4.0
+version: 8.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - calibre
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/calibre-web/README.md

@@ -1,6 +1,6 @@
 # calibre-web
 
-![Version: 6.4.0](https://img.shields.io/badge/Version-6.4.0-informational?style=flat-square) ![AppVersion: 0.6.9](https://img.shields.io/badge/AppVersion-0.6.9-informational?style=flat-square)
+![Version: 8.0.0](https://img.shields.io/badge/Version-8.0.0-informational?style=flat-square) ![AppVersion: 0.6.12](https://img.shields.io/badge/AppVersion-0.6.12-informational?style=flat-square)
 
 Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -76,17 +76,16 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/calibre-web"` |  |
-| image.tag | string | `"version-0.6.9"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.books.emptyDir.enabled | bool | `false` |  |
-| persistence.books.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.port.port | int | `8083` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [calibre-web documentation](https://github.com/linuxserver/docker-calibre-web#parameters). |
+| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/calibre-web"` | image repository |
+| image.tag | string | `"version-0.6.12"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -94,21 +93,21 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [8.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [7.0.0]
 
-- N/A
+#### Changed
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-0.6.12`.
 
-[1.0.0]: #1.0.0
+[8.0.0]: #800
+[7.0.0]: #700
 
 ## Support
 

charts/stable/calibre-web/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [8.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [7.0.0]
 
-- N/A
+#### Changed
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-0.6.12`.
 
-[1.0.0]: #1.0.0
+[8.0.0]: #800
+[7.0.0]: #700
 {{- end -}}

charts/stable/calibre-web/values.yaml

@@ -6,46 +6,43 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/calibre-web
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: version-0.6.9
+  # -- image tag
+  tag: version-0.6.12
 
-strategy:
-  type: Recreate
-
-env: {}
-  # TZ:
-  # PUID:
-  # PGID:
-  # UMASK:
-  # DOCKER_MODS:
+# -- environment variables. See more environment variables in the [calibre-web documentation](https://github.com/linuxserver/docker-calibre-web#parameters).
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1001"
+  # -- Specify the group ID the application will run as
+  PGID: "1001"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8083
+  main:
+    ports:
+      http:
+        port: 8083
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
-
+    mountPath: /config
   books:
     enabled: false
-    emptyDir:
-      enabled: false
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Set to true to retain the PVC upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
+    mountPath: /books

charts/stable/calibre/Chart.yaml

@@ -1,10 +1,10 @@
 ---
 
 apiVersion: v2
-appVersion: 5.14.0
+appVersion: version-v5.21.0
 description: Calibre is a powerful and easy to use e-book manager.
 name: calibre
-version: 3.3.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
   - calibre
@@ -19,4 +19,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://library-charts.k8s-at-home.com
-    version: 2.5.0
+    version: 4.0.0

charts/stable/calibre/README.md

@@ -1,6 +1,6 @@
 # calibre
 
-![Version: 3.3.0](https://img.shields.io/badge/Version-3.3.0-informational?style=flat-square) ![AppVersion: 5.14.0](https://img.shields.io/badge/AppVersion-5.14.0-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: version-v5.21.0](https://img.shields.io/badge/AppVersion-version--v5.21.0-informational?style=flat-square)
 
 Calibre is a powerful and easy to use e-book manager.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -76,28 +76,20 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
+| env | object | See below | environment variables. See [image docs](https://docs.linuxserver.io/images/docker-calibre#environment-variables-e) for more details. |
 | env.CLI_ARGS | string | `nil` | Optionally pass cli start arguments to calibre. |
 | env.GUAC_PASS | string | `nil` | Password's md5 hash for the calibre gui |
 | env.GUAC_USER | string | `nil` | Username for the calibre gui |
-| env.PGID | string | `"1000"` | for GroupID |
-| env.PUID | string | `"1000"` | for UserID |
-| env.TZ | string | `nil` | Set the time zone, e.g. Europe/Amsterdam |
+| env.PGID | string | `"1001"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1001"` | Specify the user ID the application will run as |
+| env.TZ | string | `"UTC"` | Set the container timezone |
 | env.UMASK_SET | string | `"022"` | for umask setting of Calibre, default if left unset is 022. |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/calibre"` |  |
-| image.tag | string | `"version-v5.14.0"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| service.additionalServices[0].enabled | bool | `false` |  |
-| service.additionalServices[0].nameSuffix | string | `"webserver"` |  |
-| service.additionalServices[0].port.name | string | `"webserver"` |  |
-| service.additionalServices[0].port.port | int | `8081` |  |
-| service.additionalServices[0].port.protocol | string | `"TCP"` |  |
-| service.additionalServices[0].port.targetPort | int | `8081` |  |
-| service.additionalServices[0].type | string | `"ClusterIP"` |  |
-| service.port | object | `{"name":"gui","port":8080}` | The default port is 8080 |
-| strategy.type | string | `"Recreate"` |  |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/calibre"` | image repository |
+| image.tag | string | `"version-v5.21.0"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -105,6 +97,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.1.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.1.1/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v5.21.0`.
+
 ### [3.1.1]
 
 #### Fixed
@@ -133,9 +139,11 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - Initial version
 
-[3.1.1]: #3.1.1
-[3.0.0]: #3.0.0
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.0.0]: #400
+[3.1.1]: #311
+[3.0.0]: #300
+[1.0.0]: #100
 
 ## Support
 

charts/stable/calibre/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,20 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [5.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [4.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.1.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.1.1/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `version-v5.21.0`.
+
 ### [3.1.1]
 
 #### Fixed
@@ -31,14 +45,15 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 - Removed default `nodeSelector`
 - Removed default values for `accessMode` and `size` under `persistence.config`.
 
-
 ### [1.0.0]
 
 #### Added
 
 - Initial version
 
-[3.1.1]: #3.1.1
-[3.0.0]: #3.0.0
-[1.0.0]: #1.0.0
+[5.0.0]: #500
+[4.0.0]: #400
+[3.1.1]: #311
+[3.0.0]: #300
+[1.0.0]: #100
 {{- end -}}

charts/stable/calibre/values.yaml

@@ -9,20 +9,22 @@
 
 # -- This is the default, you can also use requarks/wiki
 image:
+  # -- image repository
   repository: linuxserver/calibre
+  # -- image tag
+  tag: version-v5.21.0
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: version-v5.14.0
-
-strategy:
-  type: Recreate
 
+# -- environment variables. See [image docs](https://docs.linuxserver.io/images/docker-calibre#environment-variables-e) for more details.
+# @default -- See below
 env:
-  # -- Set the time zone, e.g. Europe/Amsterdam
-  TZ:
-  # -- for UserID
-  PUID: "1000"
-  # -- for GroupID
-  PGID: "1000"
+  # -- Set the container timezone
+  TZ: UTC
+  # -- Specify the user ID the application will run as
+  PUID: "1001"
+  # -- Specify the group ID the application will run as
+  PGID: "1001"
   # -- Username for the calibre gui
   GUAC_USER:
   # -- Password's md5 hash for the calibre gui
@@ -32,26 +34,31 @@ env:
   # -- Optionally pass cli start arguments to calibre.
   CLI_ARGS:
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  # -- The default port is 8080
-  port:
-    port: 8080
-    name: gui
-  additionalServices:
-  - enabled: false
-    nameSuffix: webserver
+  main:
+    ports:
+      http:
+        port: 8080
+  webserver:
+    enabled: false
     type: ClusterIP
-    port:
-      port: 8081
-      name: webserver
-      protocol: TCP
-      targetPort: 8081
+    ports:
+      webserver:
+        enabled: true
+        port: 8081
+        protocol: TCP
+        targetPort: 8081
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false

charts/stable/comcast/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
 name: comcast
-version: 4.1.0
+version: 6.0.0
 appVersion: 1.0.0
 description: periodic comcast data usage checks and save the results to InfluxDB
 keywords:
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://library-charts.k8s-at-home.com
-    version: 2.5.0
+    version: 4.0.0

charts/stable/comcast/README.md

@@ -1,6 +1,6 @@
 # comcast
 
-![Version: 4.1.0](https://img.shields.io/badge/Version-4.1.0-informational?style=flat-square) ![AppVersion: 1.0.0](https://img.shields.io/badge/AppVersion-1.0.0-informational?style=flat-square)
+![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: 1.0.0](https://img.shields.io/badge/AppVersion-1.0.0-informational?style=flat-square)
 
 periodic comcast data usage checks and save the results to InfluxDB
 
@@ -17,7 +17,7 @@ periodic comcast data usage checks and save the results to InfluxDB
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -83,15 +83,11 @@ helm install comcast k8s-at-home/comcast -f values.yaml
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
 | config | string | string | comcast's config.ini configuration |
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"billimek/comcastusage-for-influxdb"` |  |
-| image.tag | string | `"latest"` |  |
-| probes.liveness.enabled | bool | `false` |  |
-| probes.readiness.enabled | bool | `false` |  |
-| probes.startup.enabled | bool | `false` |  |
-| service.enabled | bool | `false` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"billimek/comcastusage-for-influxdb"` | image repository |
+| image.tag | string | `"latest"` | image tag |
 
 ## Changelog
 
@@ -99,6 +95,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [4.0.0]
 
 #### Added
@@ -127,8 +136,10 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[4.0.0]: #4.0.0
-[3.0.1]: #3.0.1
+[6.0.0]: #600
+[5.0.0]: #500
+[4.0.0]: #400
+[3.0.1]: #301
 
 ## Support
 

charts/stable/comcast/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.2.0. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.2.0/charts/stable/common/) for the up-to-date values.
+
 ### [4.0.0]
 
 #### Added
@@ -37,6 +50,8 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 
 - N/A
 
-[4.0.0]: #4.0.0
-[3.0.1]: #3.0.1
+[6.0.0]: #600
+[5.0.0]: #500
+[4.0.0]: #400
+[3.0.1]: #301
 {{- end -}}

charts/stable/comcast/templates/common.yaml

@@ -1,32 +1,31 @@
----
 {{/* Make sure all variables are set properly */}}
 {{- include "common.values.setup" . }}
 
-{{/* Append the configMap to the additionalVolumes */}}
-{{- define "comcast.configmap.volume" -}}
-name: comcast-settings
-configMap:
-  name: {{ template "common.names.fullname" . }}-config
-{{- end -}}
+{{/* Append the hardcoded settings */}}
+{{- define "comcast.hardcodedValues" -}}
+service:
+  main:
+    enabled: false
 
-{{- $volume := include "comcast.configmap.volume" . | fromYaml -}}
-{{- if $volume -}}
-    {{- $additionalVolumes := append .Values.additionalVolumes $volume }}
-    {{- $_ := set .Values "additionalVolumes" (deepCopy $additionalVolumes) -}}
-{{- end -}}
+probes:
+  liveness:
+    enabled: false
+  readiness:
+    enabled: false
+  startup:
+    enabled: false
 
-{{/* Append the configMap volume to the additionalVolumeMounts */}}
-{{- define "comcast.configmap.volumeMount" -}}
-name: comcast-settings
-mountPath: /src/config.ini
-subPath: config.ini
-{{- end -}}
-
-{{- $volumeMount := include "comcast.configmap.volumeMount" . | fromYaml -}}
-{{- if $volumeMount -}}
-    {{- $additionalVolumeMounts := append .Values.additionalVolumeMounts $volumeMount }}
-    {{- $_ := set .Values "additionalVolumeMounts" (deepCopy $additionalVolumeMounts) -}}
+persistence:
+  comcast-settings:
+    enabled: "true"
+    mountPath: "/src/config.ini"
+    subPath: "config.ini"
+    type: "custom"
+    volumeSpec:
+      configMap:
+        name: {{ printf "%v-config" (include "common.names.fullname" .) }}
 {{- end -}}
+{{- $_ := mergeOverwrite .Values (include "comcast.hardcodedValues" . | fromYaml) -}}
 
 {{/* Render the templates */}}
 {{ include "common.all" . }}

charts/stable/comcast/templates/configmap.yaml

@@ -2,7 +2,7 @@
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: {{ template "common.names.fullname" . }}-config
+  name: {{ include "common.names.fullname" . }}-config
   labels:
     {{- include "common.labels" . | nindent 4 }}
 data:

charts/stable/comcast/values.yaml

@@ -6,14 +6,18 @@
 #
 
 image:
+  # -- image repository
   repository: billimek/comcastusage-for-influxdb
-  pullPolicy: IfNotPresent
+  # -- image tag
   tag: latest
+  # -- image pull policy
+  pullPolicy: IfNotPresent
 
-strategy:
-  type: Recreate
-
-env: {}
+# -- environment variables.
+# @default -- See below
+env:
+  # -- Set the container timezone
+  TZ: UTC
 
 # -- comcast's config.ini configuration
 # @default -- string
@@ -31,15 +35,3 @@ config: |
   [COMCAST]
   Username = someuser
   Password = somepassword
-
-service:
-  enabled: false
-
-## Probes configuration
-probes:
-  liveness:
-    enabled: false
-  readiness:
-    enabled: false
-  startup:
-    enabled: false

charts/stable/deconz/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 2.10.03
+appVersion: 2.12.01
 description: deCONZ is an easy to use control software, with which you can set up and control Zigbee networks of any size without further programming effort.
 name: deconz
-version: 4.4.0
+version: 6.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
   - deconz
@@ -20,4 +20,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://library-charts.k8s-at-home.com
-    version: 2.5.0
+    version: 4.0.0

charts/stable/deconz/README.md

@@ -1,6 +1,6 @@
 # deconz
 
-![Version: 4.4.0](https://img.shields.io/badge/Version-4.4.0-informational?style=flat-square) ![AppVersion: 2.10.03](https://img.shields.io/badge/AppVersion-2.10.03-informational?style=flat-square)
+![Version: 6.0.0](https://img.shields.io/badge/Version-6.0.0-informational?style=flat-square) ![AppVersion: 2.12.01](https://img.shields.io/badge/AppVersion-2.12.01-informational?style=flat-square)
 
 deCONZ is an easy to use control software, with which you can set up and control Zigbee networks of any size without further programming effort.
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -76,23 +76,23 @@ N/A
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env.DECONZ_VNC_MODE | int | `1` |  |
-| env.DECONZ_VNC_PORT | int | `5900` |  |
-| env.DECONZ_WEB_PORT | int | `80` |  |
-| env.DECONZ_WS_PORT | int | `443` |  |
-| env.TZ | string | `"UTC"` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"marthoc/deconz"` |  |
-| image.tag | string | `"amd64-2.10.03"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/root/.local/share/dresden-elektronik/deCONZ"` |  |
-| service.additionalPorts[0].name | string | `"websocket"` |  |
-| service.additionalPorts[0].port | int | `443` |  |
-| service.additionalPorts[1].name | string | `"vnc"` |  |
-| service.additionalPorts[1].port | int | `5900` |  |
-| service.port.port | int | `80` |  |
-| strategy.type | string | `"Recreate"` |  |
+| affinity | object | `{}` | Affinity constraint rules to place the Pod on a specific node. [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity) |
+| env | object | See below | environment variables. See [image docs](https://github.com/marthoc/docker-deconz/blob/master/README.md) for more details. |
+| env.DECONZ_DEVICE | string | `nil` | Override the location where deCONZ looks for the RaspBee/Conbee device. |
+| env.DECONZ_VNC_MODE | int | `1` | Enable VNC access to the container to view the deCONZ ZigBee mesh |
+| env.DECONZ_VNC_PASSWORD | string | `nil` | If VNC is enabled (DECONZ_VNC_MODE=1) you can change the default password "changeme" using a Secret. |
+| env.DECONZ_VNC_PORT | int | `5900` | VNC server listen port |
+| env.DECONZ_WEB_PORT | int | `80` | Web UI listen port |
+| env.DECONZ_WS_PORT | int | `443` | Websocket listen port |
+| env.TZ | string | `"UTC"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"marthoc/deconz"` | image repository |
+| image.tag | string | `"2.12.01"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| persistence.usb | object | See values.yaml | Configure a hostPathMount to mount a USB device in the container. |
+| securityContext.privileged | bool | `nil` | Privileged securityContext may be required if USB controller is accessed directly through the host machine |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -100,6 +100,26 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [5.1.1]
+
+#### Fixed
+
+- Fixed the `DECONZ_VNC_PASSWORD` example.
+
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.1.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.1.1/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `2.12.01`.
+
 ### [3.0.0]
 
 #### Migration !breaking change!
@@ -116,6 +136,11 @@ This will preserve all devices, settings and access tokens. The configuration ca
 
 - Initial release using common chart
 
+[6.0.0]: #600
+[5.1.1]: #511
+[5.0.0]: #500
+[3.0.0]: #300
+
 ## Support
 
 - See the [Docs](https://docs.k8s-at-home.com/our-helm-charts/getting-started/)

charts/stable/deconz/README_CHANGELOG.md.gotmpl

@@ -9,6 +9,26 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+### [6.0.0]
+
+#### Changed
+
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
+
+### [5.1.1]
+
+#### Fixed
+
+- Fixed the `DECONZ_VNC_PASSWORD` example.
+
+### [5.0.0]
+
+#### Changed
+
+- **BREAKING**: Upgraded the common library dependency to version 3.1.1. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.1.1/charts/stable/common/) for the up-to-date values.
+- Changed image tag to `2.12.01`.
+
 ### [3.0.0]
 
 #### Migration !breaking change!
@@ -24,4 +44,9 @@ This will preserve all devices, settings and access tokens. The configuration ca
 #### Changed
 
 - Initial release using common chart
+
+[6.0.0]: #600
+[5.1.1]: #511
+[5.0.0]: #500
+[3.0.0]: #300
 {{- end -}}

charts/stable/deconz/values.yaml

@@ -6,64 +6,80 @@
 #
 
 image:
+  # -- image repository
   repository: marthoc/deconz
+    # -- image tag
+  tag: 2.12.01
+  # -- image pull policy
   pullPolicy: IfNotPresent
-  tag: amd64-2.10.03
 
-strategy:
-  type: Recreate
-
-# See https://github.com/marthoc/docker-deconz/blob/master/README.md for more settings for e.g. debug.
+# -- environment variables. See [image docs](https://github.com/marthoc/docker-deconz/blob/master/README.md) for more details.
+# @default -- See below
 env:
+  # -- Set the container timezone
   TZ: UTC
-  ## Path to mounted device inside the container.
-  # DECONZ_DEVICE: /dev/conbee
-  ## Do not set the VNC password here directly - use a Secret, see envValueFrom below.
-  # DECONZ_VNC_PASSWORD: changeme
+  # -- Override the location where deCONZ looks for the RaspBee/Conbee device.
+  DECONZ_DEVICE:  # /dev/ttyUSB0
+  # -- Enable VNC access to the container to view the deCONZ ZigBee mesh
   DECONZ_VNC_MODE: 1
+  # -- Web UI listen port
   DECONZ_WEB_PORT: 80
+  # -- Websocket listen port
   DECONZ_WS_PORT: 443
+  # -- VNC server listen port
   DECONZ_VNC_PORT: 5900
+  # -- If VNC is enabled (DECONZ_VNC_MODE=1) you can change the default password "changeme" using a Secret.
+  DECONZ_VNC_PASSWORD:
+    # secretKeyRef:
+    #   name: deconz-vnc-password
+    #   key: password
 
-## If VNC is enabled (DECONZ_VNC_MODE) you can change the default password "changeme" using a Secret.
-# envValueFrom:
-#   DECONZ_VNC_PASSWORD:
-#     secretKeyRef:
-#       name: deconz-vnc-password
-#       key: password
-
-## Privileged context is required to mount devices in container using volumes.
-# securityContext:
-#   privileged: true
-
-## Path to device on the host.
-# additionalVolumes:
-#   - name: conbee
-#     hostPath:
-#       path: /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_00000000-if00-port0
-
-## Path to mounted device inside the container.
-# additionalVolumeMounts:
-#   - name: conbee
-#     mountPath: /dev/conbee
-
-## The node having the dongle attached should be labeled accordingly.
-# nodeSelector:
-#   feature.node.kubernetes.io/custom-deconz: "true"
-
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 80
-  additionalPorts:
-    - name: websocket
-      port: 443
-    - name: vnc
-      port: 5900
+  main:
+    ports:
+      http:
+        port: 80
+      websocket:
+        enabled: true
+        port: 443
+      vnc:
+        enabled: true
+        port: 5900
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+securityContext:
+  # -- (bool) Privileged securityContext may be required if USB controller is accessed directly through the host machine
+  privileged:  # true
+
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
     mountPath: /root/.local/share/dresden-elektronik/deCONZ
+  # -- Configure a hostPathMount to mount a USB device in the container.
+  # @default -- See values.yaml
+  usb:
+    enabled: false
+    type: hostPath
+    hostPath: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400981-if00
+    mountPath: /dev/ttyUSB0
+
+# -- Affinity constraint rules to place the Pod on a specific node.
+# [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity)
+affinity: {}
+#   nodeAffinity:
+#     requiredDuringSchedulingIgnoredDuringExecution:
+#       nodeSelectorTerms:
+#       - matchExpressions:
+#         - key: app
+#           operator: In
+#           values:
+#           - zigbee-controller

charts/stable/deluge/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2.0.3-2201906121747
 description: Deluge is a torrent download client
 name: deluge
-version: 3.4.0
+version: 5.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - deluge
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0

charts/stable/deluge/README.md

@@ -1,6 +1,6 @@
 # deluge
 
-![Version: 3.4.0](https://img.shields.io/badge/Version-3.4.0-informational?style=flat-square) ![AppVersion: v2.0.3-2201906121747](https://img.shields.io/badge/AppVersion-v2.0.3--2201906121747-informational?style=flat-square)
+![Version: 5.0.0](https://img.shields.io/badge/Version-5.0.0-informational?style=flat-square) ![AppVersion: v2.0.3-2201906121747](https://img.shields.io/badge/AppVersion-v2.0.3--2201906121747-informational?style=flat-square)
 
 Deluge is a torrent download client
 
@@ -19,7 +19,7 @@ Kubernetes: `>=1.16.0-0`
 
 | Repository | Name | Version |
 |------------|------|---------|
-| https://library-charts.k8s-at-home.com | common | 2.5.0 |
+| https://library-charts.k8s-at-home.com | common | 4.0.0 |
 
 ## TL;DR
 
@@ -78,19 +78,17 @@ The default login details (change ASAP) are:
 
 | Key | Type | Default | Description |
 |-----|------|---------|-------------|
-| env | object | `{}` |  |
-| image.pullPolicy | string | `"IfNotPresent"` |  |
-| image.repository | string | `"linuxserver/deluge"` |  |
-| image.tag | string | `"version-2.0.3-2201906121747ubuntu18.04.1"` |  |
-| ingress.enabled | bool | `false` |  |
-| persistence.config.emptyDir.enabled | bool | `false` |  |
-| persistence.config.enabled | bool | `false` |  |
-| persistence.config.mountPath | string | `"/config"` |  |
-| persistence.downloads.emptyDir.enabled | bool | `false` |  |
-| persistence.downloads.enabled | bool | `false` |  |
-| persistence.downloads.mountPath | string | `"/downloads"` |  |
-| service.port.port | int | `8112` |  |
-| strategy.type | string | `"Recreate"` |  |
+| env | object | See below | environment variables. See more environment variables in the [deluge documentation](https://github.com/linuxserver/docker-deluge#parameters). |
+| env.DELUGE_LOGLEVEL | string | `"error"` | Set the loglevel output when running Deluge |
+| env.PGID | string | `"1000"` | Specify the group ID the application will run as |
+| env.PUID | string | `"1000"` | Specify the user ID the application will run as |
+| env.TZ | string | `"Europe/London"` | Set the container timezone |
+| image.pullPolicy | string | `"IfNotPresent"` | image pull policy |
+| image.repository | string | `"linuxserver/deluge"` | image repository |
+| image.tag | string | `"version-2.0.3-2201906121747ubuntu18.04.1"` | image tag |
+| ingress.main | object | See values.yaml | Enable and configure ingress settings for the chart under this key. |
+| persistence | object | See values.yaml | Configure persistence settings for the chart under this key. |
+| service | object | See values.yaml | Configures service settings for the chart. |
 
 ## Changelog
 
@@ -98,21 +96,21 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [4.0.0]
 
-- N/A
+#### Changed
 
-[1.0.0]: #1.0.0
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+
+[5.0.0]: #500
+[4.0.0]: #400
 
 ## Support
 

charts/stable/deluge/README_CHANGELOG.md.gotmpl

@@ -9,19 +9,19 @@ All notable changes to this application Helm chart will be documented in this fi
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-### [1.0.0]
-
-#### Added
-
-- N/A
+### [5.0.0]
 
 #### Changed
 
-- N/A
+- Upgraded the common library dependency to version 4.0.0. This introduced (potentially) breaking changes to `initContainers` and `additionalContainers`. Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-4.0.0/charts/stable/common/) for the up-to-date values.
 
-#### Removed
+### [4.0.0]
 
-- N/A
+#### Changed
 
-[1.0.0]: #1.0.0
+- **BREAKING**: Upgraded the common library dependency to version 3.0.2. This introduces several breaking changes (`service`, `ingress` and `persistence` keys have been refactored).
+  Be sure to check out the [library chart](https://github.com/k8s-at-home/library-charts/blob/common-3.0.2/charts/stable/common/) for the up-to-date values.
+
+[5.0.0]: #500
+[4.0.0]: #400
 {{- end -}}

charts/stable/deluge/values.yaml

@@ -6,50 +6,45 @@
 #
 
 image:
+  # -- image repository
   repository: linuxserver/deluge
+  # -- image pull policy
   pullPolicy: IfNotPresent
+  # -- image tag
   tag: version-2.0.3-2201906121747ubuntu18.04.1
 
-strategy:
-  type: Recreate
+# -- environment variables. See more environment variables in the [deluge documentation](https://github.com/linuxserver/docker-deluge#parameters).
+# @default -- See below
+env:
+  # -- Specify the user ID the application will run as
+  PUID: "1000"
+  # -- Specify the group ID the application will run as
+  PGID: "1000"
+  # -- Set the container timezone
+  TZ: "Europe/London"
+  # -- Set the loglevel output when running Deluge
+  DELUGE_LOGLEVEL: "error"
 
+# -- Configures service settings for the chart.
+# @default -- See values.yaml
 service:
-  port:
-    port: 8112
+  main:
+    ports:
+      http:
+        port: 8112
 
 ingress:
-  enabled: false
+  # -- Enable and configure ingress settings for the chart under this key.
+  # @default -- See values.yaml
+  main:
+    enabled: false
 
+# -- Configure persistence settings for the chart under this key.
+# @default -- See values.yaml
 persistence:
   config:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /config
-
   downloads:
     enabled: false
-    emptyDir:
-      enabled: false
     mountPath: /downloads
-    ## Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    # storageClass: "-"
-    # accessMode: ReadWriteOnce
-    # size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    # skipuninstall: false
-    # existingClaim: ""
-
-env: {}
-  ## Optional ENV Vars that can be set.
-  ## All values below are the current default values.
-  # PUID: "1000"
-  # PGID: "1000"
-  # TZ: "Europe/London"
-  # UMASK_SET: "022"
-  # DELUGE_LOGLEVEL: "error"

charts/stable/dizquetv/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 1.3.0
+appVersion: 1.4.3
 description: Create live TV channel streams from media on your Plex servers.
 name: dizquetv
-version: 2.4.0
+version: 4.0.0
 kubeVersion: ">=1.16.0-0"
 keywords:
 - dizqueTV
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
 - name: common
   repository: https://library-charts.k8s-at-home.com
-  version: 2.5.0
+  version: 4.0.0