[sabnzbd] add documentation on hostname-check (#321)

Co-authored-by: Renovate Bot <bot@renovateapp.com>

.github/workflows/release.yaml

@@ -8,8 +8,19 @@ on:
       - "charts/**"
 
 jobs:
-  release:
+  pre-release:
+    runs-on: ubuntu-latest
     timeout-minutes: 5
+    steps:
+      - name: Block concurrent releases
+        uses: softprops/turnstyle@v1
+        with:
+          continue-after-seconds: 180
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release:
+    needs: pre-release
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
@@ -17,13 +28,6 @@ jobs:
         with:
           fetch-depth: 0
 
-      - name: Turnstyle
-        uses: softprops/turnstyle@v1
-        with:
-          continue-after-seconds: 180
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Configure Git
         run: |
           git config user.name "$GITHUB_ACTOR"
@@ -45,8 +49,8 @@ jobs:
   # needed until https://github.com/helm/chart-releaser/issues/90
   # or helm/chart-releaser-action supports this
   post-release:
-    runs-on: ubuntu-latest
     needs: release
+    runs-on: ubuntu-latest
     steps:
       - name: Checkout
         uses: actions/checkout@v2

charts/alertmanager-bot/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.4.2
 description: Bot for Prometheus Alertmanager
 name: alertmanager-bot
-version: 1.0.0
+version: 1.2.0
 keywords:
   - alertmanager
   - telegram
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.1
+    version: 1.7.0

charts/bazarr/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v0.9.0.5
 description: Bazarr is a companion application to Sonarr and Radarr. It manages and downloads subtitles based on your requirements
 name: bazarr
-version: 4.7.0
+version: 4.8.0
 keywords:
   - bazarr
   - radarr
@@ -21,4 +21,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/bitwardenrs/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 name: bitwardenrs
 description: Unofficial Bitwarden compatible server written in Rust
 type: application
-version: 1.0.0
+version: 1.0.1
 appVersion: 1.16.3
 keywords:
   - bitwarden

charts/bitwardenrs/templates/hpa.yaml

@@ -8,7 +8,11 @@ metadata:
 spec:
   scaleTargetRef:
     apiVersion: apps/v1
+    {{- if eq .Values.persistence.type "statefulset" }}
+    kind: StatefulSet
+    {{- else }}
     kind: Deployment
+    {{- end }}
     name: {{ include "bitwardenrs.fullname" . }}
   minReplicas: {{ .Values.autoscaling.minReplicas }}
   maxReplicas: {{ .Values.autoscaling.maxReplicas }}

charts/booksonic-air/Chart.yaml

@@ -0,0 +1,20 @@
+apiVersion: v2
+appVersion: v2009.1.0
+description: Booksonic is a platform for accessing the audibooks you own wherever you are
+name: booksonic-air
+version: 1.0.0
+keywords:
+  - booksonic
+  - audiobook
+home: https://github.com/k8s-at-home/charts/tree/master/charts/booksonic-air
+icon: https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/booksonic-air.png
+sources:
+  - https://github.com/popeen/Booksonic-Air
+  - https://hub.docker.com/r/linuxserver/booksonic-air
+maintainers:
+  - name: wojoinc
+    email: wojoinc@pm.me
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0

charts/booksonic-air/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/booksonic-air/README.md

@@ -0,0 +1,78 @@
+# Booksonic-air
+
+This is a helm chart for [Booksonic-air](https://github.com/popeen/Booksonic-Air).
+Booksonic-air is the successor to [Booksonic](https://github.com/popeen/Booksonic-Air#history).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+This chart leverages the [linuxserver.io](https://hub.docker.com/r/linuxserver/booksonic-air) image. To specify a specific version, or to use a different image (not recommended),
+see [configuration](#configuration)
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/booksonic-air
+```
+
+## Storage
+
+If you plan to use networked storage to store your media or config for Booksonic, (NFS, etc.) please take a look at the
+Fast Access option in the Booksonic settings. This will help improve the perfomance of the application
+by not constantly monitoring media folders. 
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/booksonic-air
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/booksonic-air/values.yaml)
+file. It has several commented out suggested values. Most notably, these include several environment variables used to
+customize the container.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install booksonic \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/booksonic-air
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install booksonic k8s-at-home/booksonic-air -f values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/booksonic-air/ci/ct-values.yaml

@@ -0,0 +1,2 @@
+ingress:
+  enabled: true

charts/booksonic-air/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/booksonic-air/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/booksonic-air/values.yaml

@@ -0,0 +1,49 @@
+# Default values for Booksonic-air.
+
+image:
+  repository: linuxserver/booksonic-air
+  pullPolicy: IfNotPresent
+  tag: v2009.1.0-ls2
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 4040
+
+env: {}
+  # TZ: UTC
+  # PUID: "1001"
+  # PGID: "1001"
+  # CONTEXT_PATH=url-base # Used to set the base path for reverse proxies eg. /booksonic, /books, etc.
+
+persistence:
+  config:
+    enabled: false
+    emptyDir: false
+
+  audiobooks:
+    enabled: false
+    emptyDir: false
+    mountPath: /audiobooks
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""
+  podcasts:
+    enabled: false
+    emptyDir: false
+    mountPath: /podcasts
+  othermedia:
+    enabled: false
+    emptyDir: false
+    mountPath: /othermedia

charts/common/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 name: common
 description: Function library for k8s-at-home charts
 type: library
-version: 1.6.2
+version: 1.7.0
 keywords:
   - k8s-at-home
   - common

charts/common/templates/lib/controller/_container.tpl

@@ -5,6 +5,9 @@ The main container included in the controller.
 - name: {{ include "common.names.fullname" . }}
   image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
   imagePullPolicy: {{ .Values.image.pullPolicy }}
+  {{- with .Values.args }}
+  args: {{ . }}
+  {{- end }}
   {{- with .Values.securityContext }}
   securityContext:
     {{- toYaml . | nindent 4 }}

charts/common/values.yaml

@@ -12,6 +12,9 @@ strategy:
   ## DaemonSets ignore this
   type: RollingUpdate
 
+# Override the default args
+args: []
+
 # Set annotations on the pod
 podAnnotations: {}
 

charts/couchpotato/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: CouchPotato (CP) is an automatic NZB and torrent downloader.
 name: couchpotato
-version: 3.2.0
+version: 3.3.0
 keywords:
   - couchpotato
   - usenet
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/dashmachine/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode
+# OWNERS file for Kubernetes
+OWNERS

charts/dashmachine/Chart.yaml

@@ -4,7 +4,7 @@ description: DashMachine is another web application bookmark dashboard, with fun
 icon: https://github.com/rmountjoy92/DashMachine/raw/master/dashmachine/static/images/logo/logo.png
 home: https://github.com/rmountjoy92/DashMachine
 name: dashmachine
-version: 2.1.0
+version: 2.2.0
 sources:
   - https://github.com/rmountjoy92/DashMachine
 maintainers:
@@ -12,5 +12,5 @@ maintainers:
     email: ryan@ryanholt.net
 dependencies:
   - name: common
-    version: 1.6.2
+    version: 1.7.0
     repository: https://k8s-at-home.com/charts/

charts/ddclient/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 3.9.1
 description: Perl client used to update dynamic DNS entries for accounts on Dynamic DNS Network Service Providers
 name: ddclient
-version: 1.2.0
+version: 1.3.0
 keywords:
   - ddclient
   - dns
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/esphome/.helmignore

@@ -19,5 +19,6 @@
 .project
 .idea/
 *.tmproj
+.vscode/
 # OWNERS file for Kubernetes
 OWNERS

charts/esphome/Chart.yaml

@@ -1,14 +1,19 @@
 apiVersion: v2
 appVersion: 1.15.3
-description: ESPHome
+description: ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
 name: esphome
-version: 2.3.0
+version: 3.0.0
 keywords:
-- esphome
+  - esphome
+  - home-automation
 home: https://github.com/k8s-at-home/charts/tree/master/charts/esphome
 icon: https://esphome.io/_images/logo-text.svg
 sources:
 - https://github.com/esphome/esphome
 maintainers:
-- name: billimek
-  email: jeff@billimek.com
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0

charts/esphome/OWNERS

@@ -1,4 +1,8 @@
 approvers:
 - billimek
+- onedr0p
+- bjw-s
 reviewers:
 - billimek
+- onedr0p
+- bjw-s

charts/esphome/README.md

@@ -1,120 +1,78 @@
-# ESPHome
+# esphome
 
-This is a helm chart for [ESPHome](https://esphome.io)
+This is a helm chart for [esphome](https://github.com/esphome/esphome).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
 
 ## TL;DR;
 
 ```shell
-helm repo add k8s-at-home https://k8s-at-home.com/charts/
-helm install k8s-at-home/esphome
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/esphome
 ```
 
-## Introduction
-
-This code is adapted for [the official esphome docker image](https://hub.docker.com/r/esphome/esphome/)
-
 ## Installing the Chart
 
 To install the chart with the release name `my-release`:
 
-```shell
+```console
 helm install --name my-release k8s-at-home/esphome
 ```
+
 ## Uninstalling the Chart
 
 To uninstall/delete the `my-release` deployment:
 
-```shell
+```console
 helm delete my-release --purge
 ```
 
 The command removes all the Kubernetes components associated with the chart and deletes the release.
 
 ## Configuration
-
-The following tables lists the configurable parameters of the ESPHome chart and their default values.
-
-| Parameter                              | Description                                                                                                        | Default               |
-|----------------------------------------|--------------------------------------------------------------------------------------------------------------------|-----------------------|
-| `image.repository`                     | Image repository                                                                                                   | `esphome/esphome`     |
-| `image.tag`                            | Image tag. Possible values listed [here](https://hub.docker.com/r/esphome/esphome/tags/).                          | `0.14.5`              |
-| `image.pullPolicy`                     | Image pull policy                                                                                                  | `IfNotPresent`        |
-| `image.pullSecrets`                    | Secrets to use when pulling the image                                                                              | `[]`                  |
-| `strategyType`                         | Specifies the strategy used to replace old Pods by new ones                                                        | `Recreate`            |
-| `probes.liveness.enabled`              | Use the livenessProbe?                                                                                             | `true`                |
-| `probes.liveness.scheme `              | Specify liveness `scheme` parameter for the deployment                                                             | `HTTP`                |
-| `probes.liveness.initialDelaySeconds`  | Specify liveness `initialDelaySeconds` parameter for the deployment                                                | `60`                  |
-| `probes.liveness.failureThreshold`     | Specify liveness `failureThreshold` parameter for the deployment                                                   | `5`                   |
-| `probes.liveness.timeoutSeconds`       | Specify liveness `timeoutSeconds` parameter for the deployment                                                     | `10`                  |
-| `probes.readiness.enabled`             | Use the readinessProbe?                                                                                            | `true`                |
-| `probes.readiness.scheme `             | Specify readiness `scheme` parameter for the deployment                                                            | `HTTP`                |
-| `probes.readiness.initialDelaySeconds` | Specify readiness `initialDelaySeconds` parameter for the deployment                                               | `60`                  |
-| `probes.readiness.failureThreshold`    | Specify readiness `failureThreshold` parameter for the deployment                                                  | `5`                   |
-| `probes.readiness.timeoutSeconds`      | Specify readiness `timeoutSeconds` parameter for the deployment                                                    | `10`                  |
-| `probes.startup.enabled`               | Use the startupProbe? (new in kubernetes 1.16)                                                                     | `false`               |
-| `probes.startup.scheme `               | Specify startup `scheme` parameter for the deployment                                                              | `HTTP`                |
-| `probes.startup.failureThreshold`      | Specify startup `failureThreshold` parameter for the deployment                                                    | `5`                   |
-| `probes.startup.periodSeconds`         | Specify startup `periodSeconds` parameter for the deployment                                                       | `10`                  |
-| `service.type`                         | Kubernetes service type for the esphome GUI                                                                        | `ClusterIP`           |
-| `service.port`                         | Kubernetes port where the esphome GUI is exposed                                                                   | `6052`                |
-| `service.portName`                     | Kubernetes port name where the esphome GUI is exposed                                                              | `api`                 |
-| `service.additionalPorts`              | Add additional ports exposed by the esphome container integrations. Example homematic needs to expose a proxy port | `{}`                  |
-| `service.annotations`                  | Service annotations for the esphome GUI                                                                            | `{}`                  |
-| `service.clusterIP`                    | Cluster IP for the esphom GUI                                                                                      | ``                    |
-| `service.externalIPs`                  | External IPs for the esphome GUI                                                                                   | `[]`                  |
-| `service.loadBalancerIP`               | Loadbalancer IP for the esphome GUI                                                                                | ``                    |
-| `service.loadBalancerSourceRanges`     | Loadbalancer client IP restriction range for the esphome GUI                                                       | `[]`                  |
-| `service.publishNotReadyAddresses`     | Set to true if the notReadyAddresses should be published                                                           | `false`               |
-| `service.externalTrafficPolicy`        | Loadbalancer externalTrafficPolicy                                                                                 | ``                    |
-| `hostNetwork`                          | Enable hostNetwork - might be needed for discovery to work                                                         | `false`               |
-| `service.nodePort`                     | nodePort to listen on for the esphome GUI                                                                          | ``                    |
-| `ingress.enabled`                      | Enables Ingress                                                                                                    | `false`               |
-| `ingress.annotations`                  | Ingress annotations                                                                                                | `{}`                  |
-| `ingress.path`                         | Ingress path                                                                                                       | `/`                   |
-| `ingress.hosts`                        | Ingress accepted hostnames                                                                                         | `chart-example.local` |
-| `ingress.tls`                          | Ingress TLS configuration                                                                                          | `[]`                  |
-| `persistence.enabled`                  | Use persistent volume to store data                                                                                | `true`                |
-| `persistence.size`                     | Size of persistent volume claim                                                                                    | `5Gi`                 |
-| `persistence.existingClaim`            | Use an existing PVC to persist data                                                                                | `nil`                 |
-| `persistence.hostPath`                 | The path to the config directory on the host, instead of a PVC                                                     | `nil`                 |
-| `persistence.storageClass`             | Type of persistent volume claim                                                                                    | `-`                   |
-| `persistence.accessMode`               | Persistence access modes                                                                                           | `ReadWriteMany`       |
-| `git.enabled`                          | Use git-sync in init container                                                                                     | `false`               |
-| `git.secret`                           | Git secret to use for git-sync                                                                                     | `git-creds`           |
-| `git.syncPath`                         | Git sync path                                                                                                      | `/config`             |
-| `git.keyPath`                          | Git ssh key path                                                                                                   | `/root/.ssh`          |
-| `git.user.name`                        | Human-readable name in the “committer” and “author” fields                                                         | ``                    |
-| `git.user.email`                       | Email address for the “committer” and “author” fields                                                              | ``                    |
-| `hostMounts`                           | Array of host directories to mount; can be used for devices                                                        | []                    |
-| `hostMounts.name`                      | Name of the volume                                                                                                 | `nil`                 |
-| `hostMounts.hostPath`                  | The path on the host machine                                                                                       | `nil`                 |
-| `hostMounts.mountPath`                 | The path at which to mount (optional; assumed same as hostPath)                                                    | `nil`                 |
-| `hostMounts.type`                      | The type to mount (optional, i.e., `Directory`)                                                                    | `nil`                 |
-| `extraEnv`                             | Extra ENV vars to pass to the esphome container                                                                    | `{}`                  |
-| `extraEnvSecrets`                      | Extra env vars to pass to the esphome container from k8s secrets - see `values.yaml` for an example                | `{}`                  |
-| `resources`                            | CPU/Memory resource requests/limits or the esphome GUI                                                             | `{}`                  |
-| `nodeSelector`                         | Node labels for pod assignment or the esphome GUI                                                                  | `{}`                  |
-| `tolerations`                          | Toleration labels for pod assignment or the esphome GUI                                                            | `[]`                  |
-| `affinity`                             | Affinity settings for pod assignment or the esphome GUI                                                            | `{}`                  |
-| `podAnnotations`                       | Key-value pairs to add as pod annotations                                                                          | `{}`                  |
-| `extraVolumes`                         | Any extra volumes to define for the pod                                                                            | `{}`                  |
-| `extraVolumeMounts`                    | Any extra volumes mounts to define for each container of the pod                                                   | `{}`                  |
-
-
-
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/esphome/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
 
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
-
-```shell
-helm install --name my-release \
-  --set image.tag=latest \
+```console
+helm install esphome \
+  --set env.TZ="America/New_York" \
     k8s-at-home/esphome
 ```
-
-Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
-
-```shell
-helm install --name my-release -f values.yaml k8s-at-home/esphome
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install esphome k8s-at-home/esphome --values values.yaml 
 ```
 
-Read through the [values.yaml](values.yaml) file. It has several commented out suggested values.
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+### Upgrading from 2.x.x to 3.x.x
+
+Due to migrating to a centralized common library some values in `values.yaml` have changed.
+
+Examples:
+
+* `service.port` has been moved to `service.port.port`.
+* `persistence.type` has been moved to `controllerType`.
+
+Refer to the library values.yaml for more configuration options.

charts/esphome/ci/ct-values.yaml

@@ -0,0 +1,4 @@
+env:
+  ESPHOME_DASHBOARD_USE_PING: true
+ingress:
+  enabled: true

charts/esphome/templates/NOTES.txt

@@ -1,19 +1 @@
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ . }}{{ $.Values.ingress.path }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ template "esphome.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ template "esphome.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ template "esphome.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app={{ template "esphome.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:80
-{{- end }}
+{{- include "common.notes.defaultNotes" . -}}

charts/esphome/templates/_helpers.tpl

@@ -1,32 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "esphome.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "esphome.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "esphome.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}

charts/esphome/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/esphome/templates/deployment.yaml

@@ -1,216 +0,0 @@
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ template "esphome.fullname" . }}
-  labels:
-    app.kubernetes.io/name: {{ include "esphome.name" . }}
-    helm.sh/chart: {{ include "esphome.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  replicas: 1
-  strategy:
-    type: {{ .Values.strategyType }}
-  selector:
-    matchLabels:
-      app.kubernetes.io/name: {{ include "esphome.name" . }}
-      app.kubernetes.io/instance: {{ .Release.Name }}
-  template:
-    metadata:
-      labels:
-        app.kubernetes.io/name: {{ include "esphome.name" . }}
-        app.kubernetes.io/instance: {{ .Release.Name }}
-      {{- if .Values.podAnnotations }}
-      annotations:
-        {{- range $key, $value := .Values.podAnnotations }}
-        {{ $key }}: {{ $value | quote }}
-        {{- end }}
-      {{- end }}
-    spec:
-      {{- with .Values.image.pullSecrets }}
-      imagePullSecrets:
-      {{- range . }}
-        - name: {{ . }}
-      {{- end }}
-      {{- end }}
-      {{- if .Values.hostNetwork }}
-      hostNetwork: {{ .Values.hostNetwork }}
-      dnsPolicy: ClusterFirstWithHostNet
-      {{- end }}
-      initContainers:
-      {{- if .Values.git.enabled }}
-      - name: git-sync
-        image: "{{ .Values.git.image.repository }}:{{ .Values.git.image.tag }}"
-        imagePullPolicy: {{ .Values.git.image.pullPolicy }}
-        {{- if .Values.git.command }}
-        command:
-          {{- range .Values.git.command }}
-          - {{ . | quote }}
-          {{- end }}
-        {{- else }}
-        command: ["/bin/sh", "-c"]
-        args:
-        - set -e;
-          if [ -d "{{ .Values.git.syncPath }}/.git" ];
-          then
-            git -C "{{ .Values.git.syncPath }}" pull || true;
-          else
-            if [ "$(ls -A {{ .Values.git.syncPath }})" ]; 
-            then
-              git clone --depth 2 "{{ .Values.git.repo }}" /tmp/repo;
-              cp -rf /tmp/repo/.git "{{ .Values.git.syncPath }}";
-              cd "{{ .Values.git.syncPath }}";
-              git checkout -f;
-            else
-              git clone --depth 2 "{{ .Values.git.repo }}" "{{ .Values.git.syncPath }}";
-            fi;
-          fi;
-          if [ -f "{{ .Values.git.keyPath }}/git-crypt-key" ];
-          then
-            cd {{ .Values.git.syncPath }};
-            git-crypt unlock "{{ .Values.git.keyPath }}/git-crypt-key";
-          fi;
-        {{- end }}
-        volumeMounts:
-        - mountPath: /config
-          name: config
-        - mountPath: {{ .Values.git.keyPath }}
-          name: git-secret
-        {{- if .Values.extraVolumeMounts }}{{ toYaml .Values.extraVolumeMounts | trim | nindent 8 }}{{ end }}
-        {{- if .Values.usePodSecurityContext }}
-        securityContext:
-          runAsUser: {{ default 0 .Values.runAsUser }}
-        {{- if and (.Values.runAsUser) (.Values.fsGroup) }}
-        {{- if not (eq .Values.runAsUser 0.0) }}
-          fsGroup: {{ .Values.fsGroup }}
-        {{- end }}
-        {{- end }}
-        {{- end }}
-      {{- end }}              
-      containers:
-        - name: {{ .Chart.Name }}
-          image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
-          imagePullPolicy: {{ .Values.image.pullPolicy }}
-          ports:
-            - name: api
-              containerPort: {{ .Values.service.port }}
-              protocol: TCP
-          {{- range .Values.service.additionalPorts }}
-            - name: {{ .name }}
-              containerPort: {{ .targetPort }}
-          {{- end }}
-          {{- if .Values.probes.liveness.enabled }}
-          livenessProbe:
-            httpGet:
-              path: /ping
-              port: api
-              scheme: {{ .Values.probes.liveness.scheme }}
-            initialDelaySeconds: {{ .Values.probes.liveness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.liveness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.liveness.timeoutSeconds }}
-          {{- end }}
-          {{- if .Values.probes.readiness.enabled }}
-          readinessProbe:
-            httpGet:
-              path: /ping
-              port: api
-              scheme: {{ .Values.probes.readiness.scheme }}
-            initialDelaySeconds: {{ .Values.probes.readiness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.readiness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.readiness.timeoutSeconds }}
-          {{- end }}
-          {{- if .Values.probes.startup.enabled }}
-          startupProbe:
-            httpGet:
-              path: /ping
-              port: api
-              scheme: {{ .Values.probes.startup.scheme }}
-            failureThreshold: {{ .Values.probes.startup.failureThreshold }}
-            periodSeconds: {{ .Values.probes.startup.periodSeconds }}
-          {{- end }}
-          env:
-            {{- range $key, $value := .Values.extraEnv }}
-            - name: {{ $key | quote }}
-              value: {{ $value | quote }}
-            {{- end }}
-            {{- range $name, $opts := .Values.extraEnvSecrets }}
-            - name: {{ $name }}
-              valueFrom:
-                secretKeyRef:
-                  name: {{ $opts.secret }}
-                  key: {{ $opts.key }}
-            {{- end }}
-          envFrom:
-          {{- range .Values.extraSecretForEnvFrom }}
-            - secretRef:
-                name: {{ . }}
-          {{- end }}
-          volumeMounts:
-          - mountPath: /config
-            name: config
-          {{- range .Values.hostMounts }}
-          {{- if .mountPath }}
-          - mountPath: {{ .mountPath }}
-          {{- else }}
-          - mountPath: {{ .hostPath }}
-          {{- end }}
-            name: {{ .name }}
-          {{- end }}
-          {{- if .Values.extraVolumeMounts }}{{ toYaml .Values.extraVolumeMounts | trim | nindent 10 }}{{ end }}
-          {{- if .Values.usePodSecurityContext }}
-          securityContext:
-            runAsUser: {{ default 0 .Values.runAsUser }}
-          {{- if and (.Values.runAsUser) (.Values.fsGroup) }}
-          {{- if not (eq .Values.runAsUser 0.0) }}
-            fsGroup: {{ .Values.fsGroup }}
-          {{- end }}
-          {{- end }}
-          {{- end }}
-          resources:
-{{ toYaml .Values.resources | indent 12 }}
-          {{- if .Values.hostMounts }}
-          securityContext:
-            privileged: true
-          {{- end }}
-      volumes:
-      - name: config
-      {{- if .Values.persistence.enabled }}
-        {{- if .Values.persistence.hostPath }}
-        hostPath:
-          path: {{.Values.persistence.hostPath}}
-          type: Directory
-        {{- else }}
-        persistentVolumeClaim:
-          claimName: {{ if .Values.persistence.existingClaim }}{{ .Values.persistence.existingClaim }}{{- else }}{{ template "esphome.fullname" . }}{{- end }}
-        {{- end }}
-      {{- else }}
-        emptyDir: {}
-      {{ end }}
-      {{- range .Values.hostMounts }}
-      - name: {{ .name }}
-        hostPath:
-          path: {{.hostPath}}
-          {{- if .type }}
-          type: {{ .type }}
-          {{- end }}
-      {{- end }}
-      {{- if .Values.git.enabled }}
-      - name: git-secret
-        secret:
-          defaultMode: 256
-          secretName: {{ .Values.git.secret }}
-          optional: true
-      {{ end }}      
-      {{- if .Values.extraVolumes  }}{{ toYaml .Values.extraVolumes | trim | nindent 6 }}{{ end }}
-    {{- with .Values.nodeSelector }}
-      nodeSelector:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.affinity }}
-      affinity:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.tolerations }}
-      tolerations:
-{{ toYaml . | indent 8 }}
-    {{- end }}

charts/esphome/templates/ingress.yaml

@@ -1,39 +0,0 @@
-{{- if .Values.ingress.enabled -}}
-{{- $fullName := include "esphome.fullname" . -}}
-{{- $servicePort := .Values.service.port -}}
-{{- $ingressPath := .Values.ingress.path -}}
-apiVersion: extensions/v1beta1
-kind: Ingress
-metadata:
-  name: {{ $fullName }}
-  labels:
-    app.kubernetes.io/name: {{ include "esphome.name" . }}
-    helm.sh/chart: {{ include "esphome.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- with .Values.ingress.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if .Values.ingress.tls }}
-  tls:
-  {{- range .Values.ingress.tls }}
-    - hosts:
-      {{- range .hosts }}
-        - {{ . | quote }}
-      {{- end }}
-      secretName: {{ .secretName }}
-  {{- end }}
-{{- end }}
-  rules:
-  {{- range .Values.ingress.hosts }}
-    - host: {{ . }}
-      http:
-        paths:
-          - path: {{ $ingressPath }}
-            backend:
-              serviceName: {{ $fullName }}
-              servicePort: {{ $servicePort }}
-  {{- end }}
-{{- end }}

charts/esphome/templates/pvc.yaml

@@ -1,26 +0,0 @@
-{{- if .Values.persistence.enabled -}}
-{{- if not .Values.persistence.existingClaim -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ template "esphome.fullname" . }}
-  labels:
-    app.kubernetes.io/name: {{ include "esphome.name" . }}
-    helm.sh/chart: {{ include "esphome.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.accessMode | quote }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.size | quote }}
-{{- if .Values.persistence.storageClass }}
-{{- if (eq "-" .Values.persistence.storageClass) }}
-  storageClassName: ""
-{{- else }}
-  storageClassName: "{{ .Values.persistence.storageClass }}"
-{{- end }}
-{{- end }}
-{{- end -}}
-{{- end -}}

charts/esphome/templates/service.yaml

@@ -1,56 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ template "esphome.fullname" . }}
-  labels:
-    app.kubernetes.io/name: {{ include "esphome.name" . }}
-    helm.sh/chart: {{ include "esphome.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- if .Values.service.labels }}
-{{ toYaml .Values.service.labels | indent 4 }}
-{{- end }}
-{{- with .Values.service.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if (or (eq .Values.service.type "ClusterIP") (empty .Values.service.type)) }}
-  type: ClusterIP
-  {{- if .Values.service.clusterIP }}
-  clusterIP: {{ .Values.service.clusterIP }}
-  {{end}}
-{{- else if eq .Values.service.type "LoadBalancer" }}
-  type: {{ .Values.service.type }}
-  {{- if .Values.service.loadBalancerIP }}
-  loadBalancerIP: {{ .Values.service.loadBalancerIP }}
-  {{- end }}
-  {{- if .Values.service.externalTrafficPolicy }}
-  externalTrafficPolicy: {{ .Values.service.externalTrafficPolicy }}
-  {{- end }}
-  {{- if .Values.service.loadBalancerSourceRanges }}
-  loadBalancerSourceRanges:
-{{ toYaml .Values.service.loadBalancerSourceRanges | indent 4 }}
-  {{- end -}}
-{{- else }}
-  type: {{ .Values.service.type }}
-{{- end }}
-{{- if .Values.service.externalIPs }}
-  externalIPs:
-{{ toYaml .Values.service.externalIPs | indent 4 }}
-{{- end }}
-  publishNotReadyAddresses: {{ .Values.service.publishNotReadyAddresses }}
-  ports:
-    - name: {{ .Values.service.portName }}
-      port: {{ .Values.service.port }}
-      protocol: TCP
-      targetPort: 6052
-{{ if (and (eq .Values.service.type "NodePort") (not (empty .Values.service.nodePort))) }}
-      nodePort: {{.Values.service.nodePort}}
-{{ end }}
-{{- if .Values.service.additionalPorts }}
-    {{- .Values.service.additionalPorts | toYaml | indent 4 }}
-{{- end }}
-  selector:
-    app.kubernetes.io/name: {{ include "esphome.name" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}

charts/esphome/values.yaml

@@ -1,176 +1,39 @@
-# Default values for esphome.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
+# Default values for Bazarr.
 
 image:
   repository: esphome/esphome
-  tag: 1.15.3
   pullPolicy: IfNotPresent
-  pullSecrets: []
+  tag: 1.15.3
 
-# upgrade strategy type (e.g. Recreate or RollingUpdate)
-strategyType: Recreate
+strategy:
+  type: Recreate
 
-# Probes configuration
-probes:
-  liveness:
-    enabled: true
-    scheme: HTTP
-    initialDelaySeconds: 60
-    failureThreshold: 5
-    timeoutSeconds: 10
-  readiness:
-    enabled: true
-    scheme: HTTP
-    initialDelaySeconds: 60
-    failureThreshold: 5
-    timeoutSeconds: 10
-  startup:
-    enabled: false
-    scheme: HTTP
-    failureThreshold: 30
-    periodSeconds: 10
 service:
-  type: ClusterIP
-  port: 6052
-  portName: api
-  additionalPorts: []
-  # - name: homematicproxy
-  #   port: 2001
-  #   targetPort: 2001
-  annotations: {}
-  labels: {}
-  clusterIP: ""
-  ## List of IP addresses at which the hass-configurator service is available
-  ## Ref: https://kubernetes.io/docs/user-guide/services/#external-ips
-  ##
-  externalIPs: []
-  loadBalancerIP: ""
-  loadBalancerSourceRanges: []
-  # nodePort: 30000
-  publishNotReadyAddresses: false
+  port:
+    port: 6052
 
-ingress:
-  enabled: false
-  annotations: {}
-    # kubernetes.io/ingress.class: nginx
-    # kubernetes.io/tls-acme: "true"
-  path: /
-  hosts:
-    - esphome.local
-  tls: []
-  #  - secretName: esphome-tls
-  #    hosts:
-  #      - esphome.local
-
-hostNetwork: false
+env: {}
+  # ESPHOME_DASHBOARD_USE_PING: true
+  # ESPHOME_DASHBOARD_RELATIVE_URL: "/"
+  # ESPHOME_QUICKWIZARD:
+  # ESPHOME_IS_HASSIO:
+  # DISABLE_HA_AUTHENTICATION:
+  # USERNAME:
+  # PASSWORD:
 
 persistence:
-  enabled: true
-  ## esphome data Persistent Volume Storage Class
-  ## If defined, storageClassName: <storageClass>
-  ## If set to "-", storageClassName: "", which disables dynamic provisioning
-  ## If undefined (the default) or set to null, no storageClassName spec is
-  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-  ##   GKE, AWS & OpenStack)
-  ##
-  # storageClass: "-"
-  ##
-  ## If you want to reuse an existing claim, you can pass the name of the PVC using
-  ## the existingClaim variable
-  # existingClaim: your-claim
-  ##
-  ## If you want to use a volume on the host machine instead of a PVC:
-  # hostPath: /path/to/the/config/folder
-  accessMode: ReadWriteOnce
-  size: 1Gi
-
-## Additional hass container environment variable
-## For instance to add a http_proxy
-##
-extraEnv: {}
-
-## Additional hass container environment variable from k8s secrets
-## For instance to add a password
-## can use `!env_var` in the esphome configuration to reference these variables
-extraEnvSecrets:
-  # Example
-  # This will set ${MQTT_PASSWORD} to the 'password' key from the 'mqtt' secret
-  # MQTT_PASSWORD:
-  #   secret: mqtt
-  #   key: password
-
-## If you'd like to provide your own Kubernetes Secret object instead of passing your values
-## individually, pass in the name of a created + populated Secret.
-## All secrets will be mounted as environment variables, with each key/value mapping to a
-## corresponding environment variable.
-##
-extraSecretForEnvFrom: []
-# - esphome-secrets
-
-# Enable pod security context (must be `true` if runAsUser or fsGroup are set)
-usePodSecurityContext: true
-# Set runAsUser to 1000 to let esphome run as non-root user.
-# When setting runAsUser to a different value than 0 also set fsGroup to the same value:
-# runAsUser: <defaults to 0>
-# fsGroup: <will be omitted in deployment if runAsUser is 0>
-
-# Mount devices or folders from the host machine. Can be used for USB device mounting.
-hostMounts: []
-  # Example
-  # - name: zha
-  #   hostPath: /dev/serial/by-id/usb-Silicon_Labs_HubZ_Smart_Home_Controller_6120245D-if01-port0
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #  cpu: 100m
-  #  memory: 128Mi
-  # requests:
-  #  cpu: 100m
-  #  memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}
-
-podAnnotations: {}
-
-# Any extra volumes to define for the pod
-extraVolumes: []
-  # - name: example-name
-  #   hostPath:
-  #     path: /path/on/host
-  #     type: DirectoryOrCreate
-
-# Any extra volume mounts to define for the containers
-extraVolumeMounts: []
-#   - name: example-name
-#     mountPath: /path/in/container
-
-
-git:
-  enabled: false
-
-  image:
-    repository: k8sathome/git-crypt
-    tag: 2020.09.28
-    pullPolicy: IfNotPresent
-
-  ## Specify the command that runs in the git-sync container to pull in configuration.
-  # command: []
-
-  # Committer settings
-  user:
-    name: ""
-    email: ""
-
-  repo: ""
-  secret: git-creds
-  syncPath: /config
-  keyPath: /root/.ssh
+  config:
+    enabled: false
+    emptyDir: false
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""

charts/flood/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.1.1
 description: Flood is a monitoring service for various torrent clients
 name: flood
-version: 1.2.0
+version: 1.3.0
 keywords:
   - flood
   - rtorrent
@@ -19,4 +19,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/freshrss/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.17.0
 description: FreshRSS is a self-hosted RSS feed aggregator
 name: freshrss
-version: 1.1.0
+version: 1.2.0
 keywords:
   - freshrss
   - rss
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/grocy/.helmignore

@@ -19,5 +19,6 @@
 .project
 .idea/
 *.tmproj
+.vscode
 # OWNERS file for Kubernetes
 OWNERS

charts/grocy/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: v2.6.1
+appVersion: v2.7.1
 description: ERP beyond your fridge - grocy is a web-based self-hosted groceries & household management solution for your home
 name: grocy
-version: 2.0.0
+version: 3.0.0
 keywords:
   - grocy
 home: https://github.com/k8s-at-home/charts/tree/master/charts/grocy
@@ -10,5 +10,9 @@ icon: https://github.com/grocy/grocy/raw/master/public/img/appicons/mstile-150x1
 sources:
   - https://github.com/grocy/grocy
 maintainers:
-  - name: carpenike
-    email: ryan@ryanholt.net
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    version: 1.7.0
+    repository: https://k8s-at-home.com/charts/

charts/grocy/OWNERS

@@ -1,4 +1,8 @@
 approvers:
 - billimek
+- onedr0p
+- bjw-s
 reviewers:
-- billimek
+- billimek
+- onedr0p
+- bjw-s

charts/grocy/README.md

@@ -1,6 +1,8 @@
-# Grocy
+# grocy
 
-This is a helm chart for [Grocy](https://grocy.info/) leveraging the [Linuxserver.io image](https://hub.docker.com/r/linuxserver/grocy/)
+This is a helm chart for [grocy](https://grocy.info/).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
 
 ## TL;DR;
 
@@ -28,71 +30,40 @@ helm delete my-release --purge
 The command removes all the Kubernetes components associated with the chart and deletes the release.
 
 ## Configuration
-
-The following tables lists the configurable parameters of the Sentry chart and their default values.
-
-| Parameter                  | Description                         | Default                                                 |
-|----------------------------|-------------------------------------|---------------------------------------------------------|
-| `image.repository`         | Image repository | `linuxserver/grocy` |
-| `image.tag`                | Image tag. Possible values listed [here](https://hub.docker.com/r/linuxserver/grocy/tags/).| `v2.6.1-ls51`|
-| `image.pullPolicy`         | Image pull policy | `IfNotPresent` |
-| `strategyType`             | Specifies the strategy used to replace old Pods by new ones | `Recreate` |
-| `timezone`                 | Timezone the grocy instance should run as, e.g. 'America/New_York' | `UTC` |
-| `puid`                     | process userID the grocy instance should run as | `1000` |
-| `pgid`                     | process groupID the grocy instance should run as | `1000` |
-| `probes.liveness.initialDelaySeconds`  | Specify liveness `initialDelaySeconds` parameter for the deployment  | `60` |
-| `probes.liveness.failureThreshold`     | Specify liveness `failureThreshold` parameter for the deployment     | `5`  |
-| `probes.liveness.timeoutSeconds`       | Specify liveness `timeoutSeconds` parameter for the deployment       | `10` |
-| `probes.liveness.periodSeconds`       | Specify liveness `periodSeconds` parameter for the deployment       | `10` |
-| `probes.readiness.initialDelaySeconds` | Specify readiness `initialDelaySeconds` parameter for the deployment | `60` |
-| `probes.readiness.failureThreshold`    | Specify readiness `failureThreshold` parameter for the deployment    | `5`  |
-| `probes.readiness.timeoutSeconds`      | Specify readiness `timeoutSeconds` parameter for the deployment      | `10` |
-| `probes.readiness.periodSeconds`      | Specify readiness `periodSeconds` parameter for the deployment      | `10` |
-| `Service.type`          | Kubernetes service type for the grocy GUI | `ClusterIP` |
-| `Service.port`          | Kubernetes port where the grocy GUI is exposed| `9283` |
-| `Service.annotations`   | Service annotations for the grocy GUI | `{}` |
-| `Service.labels`        | Custom labels | `{}` |
-| `Service.loadBalancerIP` | Loadbalance IP for the grocy GUI | `{}` |
-| `Service.loadBalancerSourceRanges` | List of IP CIDRs allowed access to load balancer (if supported)      | None
-| `ingress.enabled`              | Enables Ingress | `false` |
-| `ingress.annotations`          | Ingress annotations | `{}` |
-| `ingress.labels`               | Custom labels                       | `{}`
-| `ingress.path`                 | Ingress path | `/` |
-| `ingress.hosts`                | Ingress accepted hostnames | `chart-example.local` |
-| `ingress.tls`                  | Ingress TLS configuration | `[]` |
-| `persistence.config.enabled`      | Use persistent volume to store configuration data | `true` |
-| `persistence.config.size`         | Size of persistent volume claim | `1Gi` |
-| `persistence.config.existingClaim`| Use an existing PVC to persist data | `nil` |
-| `persistence.config.subPath`  | Mount a sub directory of the persistent volume if set | `""` |
-| `persistence.config.storageClass` | Type of persistent volume claim | `-` |
-| `persistence.config.accessMode`  | Persistence access mode | `ReadWriteOnce` |
-| `persistence.config.skipuninstall`  | Do not delete the pvc upon helm uninstall | `false` |
-| `resources`                | CPU/Memory resource requests/limits | `{}` |
-| `nodeSelector`             | Node labels for pod assignment | `{}` |
-| `tolerations`              | Toleration labels for pod assignment | `[]` |
-| `affinity`                 | Affinity settings for pod assignment | `{}` |
-| `podAnnotations`           | Key-value pairs to add as pod annotations  | `{}` |
-| `deploymentAnnotations`    | Key-value pairs to add as deployment annotations  | `{}` |
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/grocy/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
 
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
-
 ```console
-helm install --name my-release \
-  --set timezone="America/New York" \
+helm install grocy \
+  --set env.TZ="America/New_York" \
     k8s-at-home/grocy
 ```
-
-Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
-
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
 ```console
-helm install --name my-release -f values.yaml k8s-at-home/grocy
+helm install grocy k8s-at-home/grocy --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
 ```
 
 ---
 **NOTE**
 
-If you get `Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...` it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
 
 ---
 
-Read through the [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/grocy/values.yaml) file. It has several commented out suggested values.
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+Refer to the library values.yaml for more configuration options.

charts/grocy/ci/ct-values.yaml

@@ -0,0 +1,2 @@
+ingress:
+  enabled: true

charts/grocy/templates/NOTES.txt

@@ -1,19 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ . }}{{ $.Values.ingress.path }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "grocy.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "grocy.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "grocy.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "grocy.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:3579 to use your application"
-  kubectl port-forward $POD_NAME 3579:80
-{{- end }}

charts/grocy/templates/_helpers.tpl

@@ -1,32 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "grocy.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "grocy.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "grocy.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}

charts/grocy/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/grocy/templates/config-pvc.yaml

@@ -1,29 +0,0 @@
-
-{{- if and .Values.persistence.config.enabled (not .Values.persistence.config.existingClaim) }}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ template "grocy.fullname" . }}-config
-  {{- if .Values.persistence.config.skipuninstall }}
-  annotations:
-    "helm.sh/resource-policy": keep
-  {{- end }}
-  labels:
-    app.kubernetes.io/name: {{ include "grocy.name" . }}
-    helm.sh/chart: {{ include "grocy.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.config.accessMode | quote }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.config.size | quote }}
-{{- if .Values.persistence.config.storageClass }}
-{{- if (eq "-" .Values.persistence.config.storageClass) }}
-  storageClassName: ""
-{{- else }}
-  storageClassName: "{{ .Values.persistence.config.storageClass }}"
-{{- end }}
-{{- end }}
-{{- end -}}

charts/grocy/templates/deployment.yaml

@@ -1,95 +0,0 @@
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "grocy.fullname" . }}
-  {{- if .Values.deploymentAnnotations }}
-  annotations:
-    {{- range $key, $value := .Values.deploymentAnnotations }}
-    {{ $key }}: {{ $value | quote }}
-    {{- end }}
-  {{- end }}
-  labels:
-    app.kubernetes.io/name: {{ include "grocy.name" . }}
-    helm.sh/chart: {{ include "grocy.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  replicas: 1
-  revisionHistoryLimit: 3
-  strategy:
-    type: {{ .Values.strategyType }}
-  selector:
-    matchLabels:
-      app.kubernetes.io/name: {{ include "grocy.name" . }}
-      app.kubernetes.io/instance: {{ .Release.Name }}
-  template:
-    metadata:
-      labels:
-        app.kubernetes.io/name: {{ include "grocy.name" . }}
-        app.kubernetes.io/instance: {{ .Release.Name }}
-      {{- if .Values.podAnnotations }}
-      annotations:
-        {{- range $key, $value := .Values.podAnnotations }}
-        {{ $key }}: {{ $value | quote }}
-        {{- end }}
-      {{- end }}
-    spec:
-      containers:
-        - name: {{ .Chart.Name }}
-          image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
-          imagePullPolicy: {{ .Values.image.pullPolicy }}
-          ports:
-            - name: http
-              containerPort: 80
-              protocol: TCP
-          livenessProbe:
-            httpGet:
-              path: /
-              port: http
-            initialDelaySeconds: {{ .Values.probes.liveness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.liveness.failureThreshold }}
-            periodSeconds: {{ .Values.probes.liveness.periodSeconds }}
-            timeoutSeconds: {{ .Values.probes.liveness.timeoutSeconds }}
-          readinessProbe:
-            httpGet:
-              path: /
-              port: http
-            initialDelaySeconds: {{ .Values.probes.readiness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.readiness.failureThreshold }}
-            periodSeconds: {{ .Values.probes.readiness.periodSeconds }}
-            timeoutSeconds: {{ .Values.probes.readiness.timeoutSeconds }}
-          env:
-            - name: TZ
-              value: "{{ .Values.timezone }}"
-            - name: PUID
-              value: "{{ .Values.puid }}"
-            - name: PGID
-              value: "{{ .Values.pgid }}"
-          volumeMounts:
-            - mountPath: /config
-              name: config
-              {{- if .Values.persistence.config.subPath }}
-              subPath: "{{ .Values.persistence.config.subPath }}"
-              {{- end }}              
-          resources:
-{{ toYaml .Values.resources | indent 12 }}
-      volumes:
-      - name: config
-      {{- if .Values.persistence.config.enabled }}
-        persistentVolumeClaim:
-          claimName: {{ if .Values.persistence.config.existingClaim }}{{ .Values.persistence.config.existingClaim }}{{- else }}{{ template "grocy.fullname" . }}-config{{- end }}
-      {{- else }}
-        emptyDir: {}
-      {{ end }}
-    {{- with .Values.nodeSelector }}
-      nodeSelector:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.affinity }}
-      affinity:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.tolerations }}
-      tolerations:
-{{ toYaml . | indent 8 }}
-    {{- end }}

charts/grocy/templates/ingress.yaml

@@ -1,41 +0,0 @@
-{{- if .Values.ingress.enabled -}}
-{{- $fullName := include "grocy.fullname" . -}}
-{{- $ingressPath := .Values.ingress.path -}}
-apiVersion: extensions/v1beta1
-kind: Ingress
-metadata:
-  name: {{ $fullName }}
-  labels:
-    app.kubernetes.io/name: {{ include "grocy.name" . }}
-    helm.sh/chart: {{ include "grocy.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-    {{- with .Values.ingress.labels -}}
-    {{ toYaml . | nindent 4 }}
-    {{- end -}}
-{{- with .Values.ingress.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if .Values.ingress.tls }}
-  tls:
-  {{- range .Values.ingress.tls }}
-    - hosts:
-      {{- range .hosts }}
-        - {{ . | quote }}
-      {{- end }}
-      secretName: {{ .secretName }}
-  {{- end }}
-{{- end }}
-  rules:
-  {{- range .Values.ingress.hosts }}
-    - host: {{ . | quote }}
-      http:
-        paths:
-          - path: {{ $ingressPath }}
-            backend:
-              serviceName: {{ $fullName }}
-              servicePort: http
-  {{- end }}
-{{- end }}

charts/grocy/templates/service.yaml

@@ -1,53 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ template "grocy.fullname" . }}
-  labels:
-    app.kubernetes.io/name: {{ include "grocy.name" . }}
-    helm.sh/chart: {{ include "grocy.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- if .Values.service.labels }}
-{{ toYaml .Values.service.labels | indent 4 }}
-{{- end }}
-{{- with .Values.service.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if (or (eq .Values.service.type "ClusterIP") (empty .Values.service.type)) }}
-  type: ClusterIP
-  {{- if .Values.service.clusterIP }}
-  clusterIP: {{ .Values.service.clusterIP }}
-  {{end}}
-{{- else if eq .Values.service.type "LoadBalancer" }}
-  type: {{ .Values.service.type }}
-  {{- if .Values.service.loadBalancerIP }}
-  loadBalancerIP: {{ .Values.service.loadBalancerIP }}
-  {{- end }}
-  {{- if .Values.service.loadBalancerSourceRanges }}
-  loadBalancerSourceRanges:
-{{ toYaml .Values.service.loadBalancerSourceRanges | indent 4 }}
-  {{- end -}}
-{{- else }}
-  type: {{ .Values.service.type }}
-{{- end }}
-{{- if .Values.service.externalIPs }}
-  externalIPs:
-{{ toYaml .Values.service.externalIPs | indent 4 }}
-{{- end }}
-  {{- if .Values.service.externalTrafficPolicy }}
-  externalTrafficPolicy: {{ .Values.service.externalTrafficPolicy }}
-  {{- end }}
-  ports:
-    - name: http
-      port: {{ .Values.service.port }}
-      protocol: TCP
-      targetPort: http
-{{ if (and (eq .Values.service.type "NodePort") (not (empty .Values.service.nodePort))) }}
-      nodePort: {{.Values.service.nodePort}}
-{{ end }}
-  selector:
-    app.kubernetes.io/name: {{ include "grocy.name" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    

charts/grocy/values.yaml

@@ -1,113 +1,23 @@
-# Default values for Ombi.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
+# Default values for grocy.
 
 image:
   repository: linuxserver/grocy
-  tag: v2.6.1-ls51
+  tag: version-v2.7.1
   pullPolicy: IfNotPresent
 
-# upgrade strategy type (e.g. Recreate or RollingUpdate)
-strategyType: Recreate
-
-# Probes configuration
-probes:
-  liveness:
-    initialDelaySeconds: 180
-    failureThreshold: 10
-    periodSeconds: 60
-    timeoutSeconds: 10
-  readiness:
-    initialDelaySeconds: 180
-    failureThreshold: 10
-    periodSeconds: 60
-    timeoutSeconds: 10
-
-nameOverride: ""
-fullnameOverride: ""
-
-timezone: UTC
-puid: 1000
-pgid: 1000
+strategy:
+  type: Recreate
 
 service:
-  type: ClusterIP
-  port: 80
-  ## Specify the nodePort value for the LoadBalancer and NodePort service types.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
-  ##
-  # nodePort:
-  ## Provide any additional annotations which may be required. This can be used to
-  ## set the LoadBalancer service type to internal only.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
-  ##
-  annotations: {}
-  labels: {}
-  ## Use loadBalancerIP to request a specific static IP,
-  ## otherwise leave blank
-  ##
-  loadBalancerIP:
-  # loadBalancerSourceRanges: []
-  ## Set the externalTrafficPolicy in the Service to either Cluster or Local
-  # externalTrafficPolicy: Cluster
+  port:
+    port: 80
 
-ingress:
-  enabled: false
-  annotations: {}
-    # kubernetes.io/ingress.class: nginx
-    # kubernetes.io/tls-acme: "true"
-  values: {}
-  path: /
-  hosts:
-    - chart-example.local
-  tls: []
-  #  - secretName: chart-example-tls
-  #    hosts:
-  #      - chart-example.local
+env: {}
+  # TZ:
+  # PUID:
+  # PGID:
 
 persistence:
   config:
-    enabled: true
-    ## Ombi configuration data Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    ##
-    # storageClass: "-"
-    ##
-    ## If you want to reuse an existing claim, you can pass the name of the PVC using
-    ## the existingClaim variable
-    # existingClaim: your-claim
-    accessMode: ReadWriteOnce
-    size: 1Gi
-
-    ## If subPath is set mount a sub folder of a volume instead of the root of the volume.
-    ## This is especially handy for volume plugins that don't natively support sub mounting (like glusterfs).
-    ##
-    subPath: ""
-    ## Do not delete the pvc upon helm uninstall
-    skipuninstall: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #  cpu: 100m
-  #  memory: 128Mi
-  # requests:
-  #  cpu: 100m
-  #  memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}
-
-podAnnotations: {}
-
-deploymentAnnotations: {}
+    enabled: false
+    emptyDir: false

charts/heimdall/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode
+# OWNERS file for Kubernetes
+OWNERS

charts/heimdall/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 2.2.2
 description: An Application dashboard and launcher
 name: heimdall
-version: 2.0.1
+version: 3.0.0
 keywords:
   - heimdall
 home: https://github.com/k8s-at-home/charts/tree/master/charts/heimdall
@@ -11,5 +11,9 @@ sources:
   - https://hub.docker.com/r/linuxserver/heimdall/
   - https://github.com/linuxserver/heimdall
 maintainers:
-  - name: skaro13
-    email: simon.caron@protonmail.com
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    version: 1.7.0
+    repository: https://k8s-at-home.com/charts/

charts/heimdall/OWNERS

@@ -1,4 +1,8 @@
 approvers:
 - billimek
+- onedr0p
+- bjw-s
 reviewers:
-- billimek
+- billimek
+- onedr0p
+- bjw-s

charts/heimdall/README.md

@@ -1,6 +1,8 @@
-# Heimdall Application Dashboard
+# heimdall
 
-This is a helm chart for [heimdall](https://github.com/heimdall/heimdall) leveraging the [Linuxserver.io image](https://hub.docker.com/r/linuxserver/heimdall/)
+This is a helm chart for [heimdall](https://github.com/heimdall/heimdall).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
 
 ## TL;DR;
 
@@ -14,7 +16,7 @@ $ helm install k8s-at-home/heimdall
 To install the chart with the release name `my-release`:
 
 ```console
-helm install my-release k8s-at-home/heimdall
+helm install --name my-release k8s-at-home/heimdall
 ```
 
 ## Uninstalling the Chart
@@ -22,75 +24,46 @@ helm install my-release k8s-at-home/heimdall
 To uninstall/delete the `my-release` deployment:
 
 ```console
-helm delete my-release
+helm delete my-release --purge
 ```
 
 The command removes all the Kubernetes components associated with the chart and deletes the release.
 
 ## Configuration
-
-The following tables lists the configurable parameters of the Sentry chart and their default values.
-
-| Parameter                  | Description                         | Default                                                 |
-|----------------------------|-------------------------------------|---------------------------------------------------------|
-| `image.repository`         | Image repository | `linuxserver/heimdall` |
-| `image.tag`                | Image tag. Possible values listed [here](https://hub.docker.com/r/linuxserver/heimdall/tags/).| `2.2.2-ls84`|
-| `image.pullPolicy`         | Image pull policy | `IfNotPresent` |
-| `strategyType`             | Specifies the strategy used to replace old Pods by new ones | `Recreate` |
-| `timezone`                 | Timezone the heimdall instance should run as, e.g. 'America/New_York' | `UTC` |
-| `puid`                     | process userID the heimdall instance should run as | `1001` |
-| `pgid`                     | process groupID the heimdall instance should run as | `1001` |
-| `probes.liveness.initialDelaySeconds`  | Specify liveness `initialDelaySeconds` parameter for the deployment  | `60` |
-| `probes.liveness.failureThreshold`     | Specify liveness `failureThreshold` parameter for the deployment     | `5`  |
-| `probes.liveness.timeoutSeconds`       | Specify liveness `timeoutSeconds` parameter for the deployment       | `10` |
-| `probes.readiness.initialDelaySeconds` | Specify readiness `initialDelaySeconds` parameter for the deployment | `60` |
-| `probes.readiness.failureThreshold`    | Specify readiness `failureThreshold` parameter for the deployment    | `5`  |
-| `probes.readiness.timeoutSeconds`      | Specify readiness `timeoutSeconds` parameter for the deployment      | `10` |
-| `Service.type`          | Kubernetes service type for the heimdall GUI | `ClusterIP` |
-| `Service.port`          | Kubernetes port where the heimdall GUI is exposed| `80` |
-| `Service.annotations`   | Service annotations for the heimdall GUI | `{}` |
-| `Service.labels`        | Custom labels | `{}` |
-| `Service.loadBalancerIP` | Loadbalance IP for the heimdall GUI | `{}` |
-| `Service.loadBalancerSourceRanges` | List of IP CIDRs allowed access to load balancer (if supported)      | None
-| `ingress.enabled`              | Enables Ingress | `false` |
-| `ingress.annotations`          | Ingress annotations | `{}` |
-| `ingress.labels`               | Custom labels                       | `{}`
-| `ingress.path`                 | Ingress path | `/` |
-| `ingress.hosts`                | Ingress accepted hostnames | `chart-example.local` |
-| `ingress.tls`                  | Ingress TLS configuration | `[]` |
-| `persistence.config.enabled`      | Use persistent volume to store configuration data | `true` |
-| `persistence.config.size`         | Size of persistent volume claim | `1Gi` |
-| `persistence.config.existingClaim`| Use an existing PVC to persist data | `nil` |
-| `persistence.config.storageClass` | Type of persistent volume claim | `-` |
-| `persistence.config.accessMode`  | Persistence access mode | `ReadWriteOnce` |
-| `persistence.config.skipuninstall`  | Do not delete the pvc upon helm uninstall | `false` |
-| `persistence.extraExistingClaimMounts`  | Optionally add multiple existing claims | `[]` |
-| `resources`                | CPU/Memory resource requests/limits | `{}` |
-| `nodeSelector`             | Node labels for pod assignment | `{}` |
-| `tolerations`              | Toleration labels for pod assignment | `[]` |
-| `affinity`                 | Affinity settings for pod assignment | `{}` |
-| `podAnnotations`           | Key-value pairs to add as pod annotations  | `{}` |
-| `deploymentAnnotations`           | Key-value pairs to add as deployment annotations  | `{}` |
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/heimdall/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
 
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
-
 ```console
-helm install my-release \
-  --set timezone="America/New York" \
+helm install heimdall \
+  --set env.TZ="America/New_York" \
     k8s-at-home/heimdall
 ```
-
-Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
-
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
 ```console
-helm install my-release -f values.yaml k8s-at-home/heimdall
+helm install heimdall k8s-at-home/heimdall --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
 ```
 
 ---
 **NOTE**
 
-If you get `Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...` it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
 
 ---
 
-Read through the [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/heimdall/values.yaml) file. It has several commented out suggested values.
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+Refer to the library values.yaml for more configuration options.

charts/heimdall/ci/ct-values.yaml

@@ -0,0 +1,2 @@
+ingress:
+  enabled: true

charts/heimdall/templates/NOTES.txt

@@ -1,19 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ . }}{{ $.Values.ingress.path }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "heimdall.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "heimdall.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "heimdall.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "heimdall.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:80
-{{- end }}

charts/heimdall/templates/_helpers.tpl

@@ -1,32 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "heimdall.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "heimdall.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "heimdall.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}

charts/heimdall/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/heimdall/templates/config-pvc.yaml

@@ -1,29 +0,0 @@
-
-{{- if and .Values.persistence.config.enabled (not .Values.persistence.config.existingClaim) }}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ template "heimdall.fullname" . }}-config
-  {{- if .Values.persistence.config.skipuninstall }}
-  annotations:
-    "helm.sh/resource-policy": keep
-  {{- end }}
-  labels:
-    app.kubernetes.io/name: {{ include "heimdall.name" . }}
-    helm.sh/chart: {{ include "heimdall.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.config.accessMode | quote }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.config.size | quote }}
-{{- if .Values.persistence.config.storageClass }}
-{{- if (eq "-" .Values.persistence.config.storageClass) }}
-  storageClassName: ""
-{{- else }}
-  storageClassName: "{{ .Values.persistence.config.storageClass }}"
-{{- end }}
-{{- end }}
-{{- end -}}

charts/heimdall/templates/deployment.yaml

@@ -1,98 +0,0 @@
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "heimdall.fullname" . }}
-  {{- if .Values.deploymentAnnotations }}
-  annotations:
-    {{- range $key, $value := .Values.deploymentAnnotations }}
-    {{ $key }}: {{ $value | quote }}
-    {{- end }}
-  {{- end }}
-  labels:
-    app.kubernetes.io/name: {{ include "heimdall.name" . }}
-    helm.sh/chart: {{ include "heimdall.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-spec:
-  replicas: 1
-  revisionHistoryLimit: 3
-  strategy:
-    type: {{ .Values.strategyType }}
-  selector:
-    matchLabels:
-      app.kubernetes.io/name: {{ include "heimdall.name" . }}
-      app.kubernetes.io/instance: {{ .Release.Name }}
-  template:
-    metadata:
-      labels:
-        app.kubernetes.io/name: {{ include "heimdall.name" . }}
-        app.kubernetes.io/instance: {{ .Release.Name }}
-      {{- if .Values.podAnnotations }}
-      annotations:
-        {{- range $key, $value := .Values.podAnnotations }}
-        {{ $key }}: {{ $value | quote }}
-        {{- end }}
-      {{- end }}
-    spec:
-      containers:
-        - name: {{ .Chart.Name }}
-          image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
-          imagePullPolicy: {{ .Values.image.pullPolicy }}
-          ports:
-            - name: http
-              containerPort: 80
-              protocol: TCP
-          livenessProbe:
-            tcpSocket:
-              port: http
-            initialDelaySeconds: {{ .Values.probes.liveness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.liveness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.liveness.timeoutSeconds }}
-          readinessProbe:
-            tcpSocket:
-              port: http
-            initialDelaySeconds: {{ .Values.probes.readiness.initialDelaySeconds }}
-            failureThreshold: {{ .Values.probes.readiness.failureThreshold }}
-            timeoutSeconds: {{ .Values.probes.readiness.timeoutSeconds }}
-          env:
-            - name: TZ
-              value: "{{ .Values.timezone }}"
-            - name: PUID
-              value: "{{ .Values.puid }}"
-            - name: PGID
-              value: "{{ .Values.pgid }}"
-          volumeMounts:
-            - mountPath: /config
-              name: config
-            {{- range .Values.persistence.extraExistingClaimMounts }}
-            - name: {{ .name }}
-              mountPath: {{ .mountPath }}
-              readOnly: {{ .readOnly }}
-            {{- end }}
-          resources:
-{{ toYaml .Values.resources | indent 12 }}
-      volumes:
-      - name: config
-      {{- if .Values.persistence.config.enabled }}
-        persistentVolumeClaim:
-          claimName: {{ if .Values.persistence.config.existingClaim }}{{ .Values.persistence.config.existingClaim }}{{- else }}{{ template "heimdall.fullname" . }}-config{{- end }}
-      {{- else }}
-        emptyDir: {}
-      {{- end }}
-      {{- range .Values.persistence.extraExistingClaimMounts }}
-      - name: {{ .name }}
-        persistentVolumeClaim:
-          claimName: {{ .existingClaim }}
-      {{- end }}
-    {{- with .Values.nodeSelector }}
-      nodeSelector:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.affinity }}
-      affinity:
-{{ toYaml . | indent 8 }}
-    {{- end }}
-    {{- with .Values.tolerations }}
-      tolerations:
-{{ toYaml . | indent 8 }}
-    {{- end }}

charts/heimdall/templates/ingress.yaml

@@ -1,41 +0,0 @@
-{{- if .Values.ingress.enabled -}}
-{{- $fullName := include "heimdall.fullname" . -}}
-{{- $ingressPath := .Values.ingress.path -}}
-apiVersion: extensions/v1beta1
-kind: Ingress
-metadata:
-  name: {{ $fullName }}
-  labels:
-    app.kubernetes.io/name: {{ include "heimdall.name" . }}
-    helm.sh/chart: {{ include "heimdall.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-    {{- with .Values.ingress.labels -}}
-    {{ toYaml . | nindent 4 }}
-    {{- end -}}
-{{- with .Values.ingress.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if .Values.ingress.tls }}
-  tls:
-  {{- range .Values.ingress.tls }}
-    - hosts:
-      {{- range .hosts }}
-        - {{ . | quote }}
-      {{- end }}
-      secretName: {{ .secretName }}
-  {{- end }}
-{{- end }}
-  rules:
-  {{- range .Values.ingress.hosts }}
-    - host: {{ . | quote }}
-      http:
-        paths:
-          - path: {{ $ingressPath }}
-            backend:
-              serviceName: {{ $fullName }}
-              servicePort: http
-  {{- end }}
-{{- end }}

charts/heimdall/templates/service.yaml

@@ -1,52 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ template "heimdall.fullname" . }}
-  labels:
-    app.kubernetes.io/name: {{ include "heimdall.name" . }}
-    helm.sh/chart: {{ include "heimdall.chart" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}
-    app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- if .Values.service.labels }}
-{{ toYaml .Values.service.labels | indent 4 }}
-{{- end }}
-{{- with .Values.service.annotations }}
-  annotations:
-{{ toYaml . | indent 4 }}
-{{- end }}
-spec:
-{{- if (or (eq .Values.service.type "ClusterIP") (empty .Values.service.type)) }}
-  type: ClusterIP
-  {{- if .Values.service.clusterIP }}
-  clusterIP: {{ .Values.service.clusterIP }}
-  {{end}}
-{{- else if eq .Values.service.type "LoadBalancer" }}
-  type: {{ .Values.service.type }}
-  {{- if .Values.service.loadBalancerIP }}
-  loadBalancerIP: {{ .Values.service.loadBalancerIP }}
-  {{- end }}
-  {{- if .Values.service.loadBalancerSourceRanges }}
-  loadBalancerSourceRanges:
-{{ toYaml .Values.service.loadBalancerSourceRanges | indent 4 }}
-  {{- end -}}
-{{- else }}
-  type: {{ .Values.service.type }}
-{{- end }}
-{{- if .Values.service.externalIPs }}
-  externalIPs:
-{{ toYaml .Values.service.externalIPs | indent 4 }}
-{{- end }}
-  {{- if .Values.service.externalTrafficPolicy }}
-  externalTrafficPolicy: {{ .Values.service.externalTrafficPolicy }}
-  {{- end }}
-  ports:
-    - name: http
-      port: {{ .Values.service.port }}
-      protocol: TCP
-      targetPort: http
-{{ if (and (eq .Values.service.type "NodePort") (not (empty .Values.service.nodePort))) }}
-      nodePort: {{.Values.service.nodePort}}
-{{ end }}
-  selector:
-    app.kubernetes.io/name: {{ include "heimdall.name" . }}
-    app.kubernetes.io/instance: {{ .Release.Name }}

charts/heimdall/values.yaml

@@ -1,106 +1,27 @@
-# Default values for heimdall.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
+# Default values for grocy.
 
 image:
   repository: linuxserver/heimdall
-  tag: 2.2.2-ls98
+  tag: version-2.2.2
   pullPolicy: IfNotPresent
 
-# upgrade strategy type (e.g. Recreate or RollingUpdate)
-strategyType: Recreate
-
-# Probes configuration
-probes:
-  liveness:
-    initialDelaySeconds: 60
-    failureThreshold: 5
-    timeoutSeconds: 10
-  readiness:
-    initialDelaySeconds: 60
-    failureThreshold: 5
-    timeoutSeconds: 10
-
-nameOverride: ""
-fullnameOverride: ""
-
-timezone: UTC
-puid: 1001
-pgid: 1001
+strategy:
+  type: Recreate
 
 service:
-  type: ClusterIP
-  port: 80
-  ## Specify the nodePort value for the LoadBalancer and NodePort service types.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
-  ##
-  # nodePort:
-  ## Provide any additional annotations which may be required. This can be used to
-  ## set the LoadBalancer service type to internal only.
-  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
-  ##
-  annotations: {}
-  labels: {}
-  ## Use loadBalancerIP to request a specific static IP,
-  ## otherwise leave blank
-  ##
-  loadBalancerIP:
-  # loadBalancerSourceRanges: []
-  ## Set the externalTrafficPolicy in the Service to either Cluster or Local
-  # externalTrafficPolicy: Cluster
+  port:
+    port: 80
 
-ingress:
-  enabled: false
-  annotations: {}
-    # kubernetes.io/ingress.class: nginx
-    # kubernetes.io/tls-acme: "true"
-  labels: {}
-  path: /
-  hosts:
-    - chart-example.local
-  tls: []
-  #  - secretName: chart-example-tls
-  #    hosts:
-  #      - chart-example.local
+env: {}
+  # TZ:
+  # PUID:
+  # PGID:
 
 persistence:
   config:
+    enabled: false
+    emptyDir: false
+
+probes:
+  startup:
     enabled: true
-    ## heimdall configuration data Persistent Volume Storage Class
-    ## If defined, storageClassName: <storageClass>
-    ## If set to "-", storageClassName: "", which disables dynamic provisioning
-    ## If undefined (the default) or set to null, no storageClassName spec is
-    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-    ##   GKE, AWS & OpenStack)
-    ##
-    # storageClass: "-"
-    ##
-    ## If you want to reuse an existing claim, you can pass the name of the PVC using
-    ## the existingClaim variable
-    # existingClaim: your-claim
-    accessMode: ReadWriteOnce
-    size: 1Gi
-    ## Do not delete the pvc upon helm uninstall
-    skipuninstall: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #  cpu: 100m
-  #  memory: 128Mi
-  # requests:
-  #  cpu: 100m
-  #  memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}
-
-podAnnotations: {}
-
-deploymentAnnotations: {}

charts/home-assistant/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.118.3
 description: Home Assistant
 name: home-assistant
-version: 3.1.0
+version: 3.4.0
 keywords:
 - home-assistant
 - hass
@@ -21,7 +21,7 @@ maintainers:
   email: phil@hellmi.de
 dependencies:
 - name: postgresql
-  version: 10.1.1
+  version: 10.1.3
   repository: https://charts.bitnami.com/bitnami
   condition: postgresql.enabled
 - name: mariadb
@@ -29,6 +29,6 @@ dependencies:
   repository: https://charts.bitnami.com/bitnami
   condition: mariadb.enabled
 - name: influxdb
-  version: 1.0.0
+  version: 1.1.2
   repository: https://charts.bitnami.com/bitnami
   condition: influxdb.enabled

charts/home-assistant/README.md

@@ -42,7 +42,7 @@ The command removes all the Kubernetes components associated with the chart and
 The following tables lists the configurable parameters of the Home Assistant chart and their default values.
 
 | Parameter                                       | Description                                                                                                                                                                                                                               | Default                                |
-|-------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------|
+| ----------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------- |
 | `image.repository`                              | Image repository                                                                                                                                                                                                                          | `homeassistant/home-assistant`         |
 | `image.tag`                                     | Image tag. Possible values listed [here](https://hub.docker.com/r/homeassistant/home-assistant/tags/).                                                                                                                                    | `0.118.3`                              |
 | `image.pullPolicy`                              | Image pull policy                                                                                                                                                                                                                         | `IfNotPresent`                         |
@@ -142,7 +142,7 @@ The following tables lists the configurable parameters of the Home Assistant cha
 | `vscode.vscodePath`                             | Base path of the VS Code configuration files                                                                                                                                                                                              | `/config/.vscode`                      |
 | `vscode.password`                               | If this is set, will require a password to access the VS Code Server UI                                                                                                                                                                   | ``                                     |
 | `vscode.extraEnv`                               | Extra ENV vars to pass to the configuration UI                                                                                                                                                                                            | `{}`                                   |
-| `vscode.args`                                   | Optional arguments to pass into vscode image. Defaulting to "-" uses default arguments.         | `-`                                   |
+| `vscode.args`                                   | Optional arguments to pass into vscode image. Defaulting to "-" uses default arguments.                                                                                                                                                   | `-`                                    |
 | `vscode.ingress.enabled`                        | Enables Ingress for the VS Code UI                                                                                                                                                                                                        | `false`                                |
 | `vscode.ingress.annotations`                    | Ingress annotations for the VS Code UI                                                                                                                                                                                                    | `{}`                                   |
 | `vscode.ingress.hosts`                          | Ingress accepted hostnames for the VS Code UI                                                                                                                                                                                             | `chart-example.local`                  |
@@ -163,7 +163,8 @@ The following tables lists the configurable parameters of the Home Assistant cha
 | `appdaemon.image.tag`                           | Image tag                                                                                                                                                                                                                                 | `3.0.5`                                |
 | `appdaemon.image.pullPolicy`                    | Image pull policy                                                                                                                                                                                                                         | `IfNotPresent`                         |
 | `appdaemon.haToken`                             | Home Assistant API token - you need to generate it in your Home Assistant profile and then copy here                                                                                                                                      | ``                                     |
-| `appdaemon.extraEnv`                            | Extra ENV vars to pass to the AppDaemon container                                                                                                                                                                                         | `{}`                                   |
+| `appdaemon.env`                                 | Extra ENV vars to pass to the AppDaemon container                                                                                                                                                                                         | `{}`                                   |
+| `appdaemon.envFrom`                             | Extra ENV vars from configMap or secret to pass to the AppDaemon container                                                                                                                                                                | `{}`                                   |
 | `appdaemon.configSubPath`                       | An optional subPath for the AppDaemon container's config volume mount                                                                                                                                                                     | `appdaemon`                            |
 | `appdaemon.ingress.enabled`                     | Enables Ingress for the AppDaemon UI                                                                                                                                                                                                      | `false`                                |
 | `appdaemon.ingress.annotations`                 | Ingress annotations for the AppDaemon UI                                                                                                                                                                                                  | `{}`                                   |

charts/home-assistant/templates/deployment.yaml

@@ -338,7 +338,14 @@ spec:
             - name: appdaemon
               containerPort: {{ .Values.appdaemon.service.port }}
               protocol: TCP
+          {{- with .Values.appdaemon.envFrom }}
+          envFrom:
+            {{- toYaml . | nindent 12 }}
+          {{- end }}
+          {{- with .Values.appdaemon.env }}
           env:
+            {{- toYaml . | nindent 12 }}
+          {{- end }}
             - name: HA_URL
               value: "http://localhost:{{ .Values.service.port }}"
             {{- if .Values.appdaemon.ingress.enabled }}
@@ -365,10 +372,6 @@ spec:
             - name: GIT_COMMITTER_EMAIL
               value: {{ .Values.git.user.email }}
             {{ end }}
-            {{- range $key, $value := .Values.vscode.extraEnv }}
-            - name: {{ $key }}
-              value: {{ $value | quote }}
-            {{- end }}
           volumeMounts:
           - mountPath: /ha-conf
             name: config

charts/home-assistant/values.yaml

@@ -313,10 +313,26 @@ appdaemon:
   ## Home Assistant API token
   # haToken:
 
-  ## Additional hass-vscode container environment variable
-  ## For instance to add a http_proxy
-  ##
-  extraEnv: {}
+  # Environment variables to be passed to appdaemon container
+  env: []
+  # - name: SOME_VAR
+  #   value: some-var-value
+  # - name: SOME_VAR_FROM_CONFIG_MAP
+  #   valueFrom:
+  #     configMapRef:
+  #       name: configmap-name
+  #       key: config-key
+  # - name: SOME_SECRET
+  #   valueFrom:
+  #     secretKeyRef:
+  #       name: secret-name
+  #       key: secret-key
+
+  envFrom: []
+  # - configMapRef:
+  #     name: config-map-name
+  # - secretRef:
+  #     name: secret-name
 
   # If you use an existingClaim for the config volume then it is sometimes useful to specify a subPath
   # within the volume to mount instead of mounting the root.

charts/homer/Chart.yaml

@@ -4,7 +4,7 @@ description: A dead simple static HOMepage for your servER to keep your services
 icon: https://raw.githubusercontent.com/bastienwirtz/homer/main/public/logo.png
 home: https://github.com/bastienwirtz/homer
 name: homer
-version: 1.1.0
+version: 1.2.0
 sources:
   - https://github.com/bastienwirtz/homer
 maintainers:
@@ -12,5 +12,5 @@ maintainers:
     email: jeff@billimek.com
 dependencies:
   - name: common
-    version: 1.6.2
+    version: 1.7.0
     repository: https://k8s-at-home.com/charts/

charts/jackett/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v0.16.2106
 description: API Support for your favorite torrent trackers
 name: jackett
-version: 5.6.0
+version: 5.7.0
 keywords:
   - jackett
   - torrent
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/jellyfin/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 10.6.4
 description: Jellyfin is a Free Software Media System
 name: jellyfin
-version: 3.1.1
+version: 3.3.0
 keywords:
   - jellyfin
   - plex
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.1
+    version: 1.7.0

charts/lidarr/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.8.0.1886
 description: Looks and smells like Sonarr but made for music
 name: lidarr
-version: 5.6.0
+version: 5.7.0
 keywords:
   - lidarr
   - torrent
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/lychee/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

charts/lychee/Chart.yaml

@@ -0,0 +1,21 @@
+apiVersion: v2
+appVersion: 4.0.8
+description: Lychee is a free photo-management tool, which runs on your server or web-space
+name: lychee
+version: 1.0.0
+keywords:
+  - lychee
+  - photo
+  - pictures
+home: https://github.com/k8s-at-home/charts/tree/master/charts/lychee
+icon: https://github.com/LycheeOrg/Lychee/blob/master/Banner.png?raw=true
+sources:
+  - https://github.com/LycheeOrg/Lychee
+  - https://hub.docker.com/r/lycheeorg/lychee
+maintainers:
+  - name: auricom
+    email: k8s-at-home@xpander.eml.cc
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0

charts/lychee/OWNERS

@@ -0,0 +1,4 @@
+approvers:
+- auricom
+reviewers:
+- auricom

charts/lychee/README.md

@@ -0,0 +1,67 @@
+# Lychee
+
+This is a helm chart for [Lychee](https://github.com/LycheeOrg/Lychee).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/lychee
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/lychee
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/lychee/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install lychee \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/lychee
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install lychee k8s-at-home/lychee --values values.yaml
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 1.0.1 -> 2.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/lychee/ci/ct-values.yaml

@@ -0,0 +1,2 @@
+ingress:
+  enabled: true

charts/lychee/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/lychee/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/lychee/values.yaml

@@ -0,0 +1,70 @@
+# Default values for Lychee.
+
+image:
+  repository: lycheeorg/lychee-laravel
+  pullPolicy: IfNotPresent
+  tag: v4.0.8
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+env: {}
+  # PHP_TZ: UTC
+  # PUID: 1001
+  # PGID: 1001
+
+persistence:
+  config:
+    enabled: false
+    emptyDir: false
+    mountPath: /conf
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""
+
+  uploads:
+    enabled: false
+    emptyDir: false
+    mountPath: /uploads
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""
+
+  sym:
+    enabled: false
+    emptyDir: false
+    mountPath: /sym
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""

charts/monica/Chart.yaml

@@ -0,0 +1,23 @@
+apiVersion: v2
+appVersion: v2.19.1
+description: A Personal Relationship Management tool to help you organize your social life
+name: monica
+version: 1.0.0
+keywords:
+  - crm
+home: https://www.monicahq.com/
+icon: https://pbs.twimg.com/profile_images/951820722191720450/mtCNuIXX.jpg
+sources:
+  - https://github.com/monicahq/monica
+  - https://hub.docker.com/_/monica
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0
+  - name: mariadb
+    version: 9.0.1
+    repository: https://charts.bitnami.com/bitnami
+    condition: mariadb.enabled

charts/monica/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/monica/README.md

@@ -0,0 +1,68 @@
+# Monica
+
+This is a helm chart for [Monica](https://github.com/monicahq/monica).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+This chart supports many different environment variables. See the [Monica Documentation](https://raw.githubusercontent.com/monicahq/monica/master/.env.example) for more information.
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/moica
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/monica
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/monica/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install monica \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/monica
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install monica k8s-at-home/monica --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/monica/ci/ct-values.yaml

@@ -0,0 +1,17 @@
+env:
+  APP_ENV: production
+  APP_KEY: pG335ncsoY7z18CLdpXOp0JXGYKMtFa1
+  APP_URL: https://crm.k8s-at-home.com
+  DB_HOST: monica-mariadb
+  DB_DATABASE: monica
+  DB_USERNAME: monica
+  DB_PASSWORD: monicapass
+
+ingress:
+  enabled: true
+
+fullnameOverride: monica
+
+mariadb:
+  enabled: true
+  fullnameOverride: monica-mariadb

charts/monica/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/monica/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/monica/values.yaml

@@ -0,0 +1,45 @@
+# Default values for Monica.
+
+image:
+  repository: monica
+  pullPolicy: IfNotPresent
+  tag: 2.19.1-apache
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+env: {}
+  # See the Monica documentation for all available options for environment variables: https://raw.githubusercontent.com/monicahq/monica/master/.env.example
+  # APP_ENV: production
+  # Generate a different APP_KEY with `pwgen -s 32 1`
+  # APP_KEY: pG335ncsoY7z18CLdpXOp0JXGYKMtFa1
+  # APP_URL: https://crm.k8s-at-home.com
+  # DB_HOST: monica-mariadb
+  # DB_DATABASE: monica
+  # DB_USERNAME: monica
+  # DB_PASSWORD: monicapass
+
+persistence:
+  config:
+    enabled: false
+    emptyDir: false
+    mountPath: /var/www/html/storage
+
+# Enabled mariadb
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/mariadb
+mariadb:
+  enabled: false
+  architecture: standalone
+  auth:
+    database: monica
+    username: monica
+    password: monicapass
+    rootPassword: monicarootpass
+  primary:
+    persistence:
+      enabled: false
+      # storageClass: ""

charts/node-red/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.2.5
 description: Node-RED is low-code programming for event-driven applications
 name: node-red
-version: 4.2.0
+version: 4.3.0
 keywords:
   - nodered
   - node-red
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/nzbget/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v21.0
 description: NZBGet is a Usenet downloader client
 name: nzbget
-version: 6.6.0
+version: 6.7.0
 keywords:
   - nzbget
   - usenet
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0

charts/nzbhydra2/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v3.4.3
 description: Usenet meta search
 name: nzbhydra2
-version: 4.5.1
+version: 4.7.0
 keywords:
   - nzbhydra2
   - usenet
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.1
+    version: 1.7.0

charts/nzbhydra2/values.yaml

@@ -21,3 +21,7 @@ persistence:
   config:
     enabled: false
     emptyDir: false
+
+probes:
+  startup:
+    enabled: true

charts/octoprint/Chart.yaml

@@ -0,0 +1,21 @@
+apiVersion: v2
+appVersion: 1.4.2
+description: OctoPrint is the snappy web interface for your 3D printer
+name: octoprint
+version: 1.0.1
+keywords:
+  - octoprint
+  - 3d
+  - printer
+home: https://github.com/k8s-at-home/charts/tree/master/charts/octoprint
+icon: https://avatars3.githubusercontent.com/u/5982294?s=400&v=4
+sources:
+  - https://github.com/OctoPrint/OctoPrint
+  - https://hub.docker.com/r/octoprint/octoprint
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0

charts/octoprint/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/octoprint/README.md

@@ -0,0 +1,63 @@
+# Octoprint
+
+This is a helm chart for [Octoprint](https://github.com/OctoPrint/OctoPrint).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/octoprint
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/octoprint
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/octoprint/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install octoprint \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/octoprint
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install octoprint k8s-at-home/octoprint --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---

charts/octoprint/ci/ct-values.yaml

@@ -0,0 +1,2 @@
+ingress:
+  enabled: true

charts/octoprint/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/octoprint/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/octoprint/values.yaml

@@ -0,0 +1,38 @@
+# Default values for Octoprint.
+
+image:
+  repository: octoprint/octoprint
+  pullPolicy: IfNotPresent
+  tag: 1.4.2
+
+strategy:
+  type: Recreate
+
+securityContext:
+  privileged: true
+
+service:
+  port:
+    port: 5000
+
+env:
+  OCTOPRINT_PORT: "5000"
+  # TZ: UTC
+  # CAMERA_DEV: /dev/video0
+
+persistence:
+  data:
+    enabled: false
+    emptyDir: false
+    mountPath: /octoprint
+
+# Paths to your 3D printer and/or camera in the container
+additionalVolumeMounts:
+  - name: printer
+    mountPath: /dev/ttyACM0
+
+# Paths to your 3D printer and/or camera on the host
+additionalVolumes:
+  - name: printer
+    hostPath:
+      path: /dev/ttyACM0

charts/ombi/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.0.681
 description: Want a Movie or TV Show on Plex or Emby? Use Ombi!
 name: ombi
-version: 5.6.0
+version: 5.7.0
 keywords:
   - ombi
   - plex
@@ -21,7 +21,7 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.2
+    version: 1.7.0
   - name: mariadb
     version: 9.0.1
     repository: https://charts.bitnami.com/bitnami

charts/organizr/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: HTPC/Homelab Services Organizer
 name: organizr
-version: 2.5.1
+version: 2.7.0
 keywords:
   - organizr
 home: https://github.com/k8s-at-home/charts/tree/master/charts/organizr
@@ -16,4 +16,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 1.6.1
+    version: 1.7.0

charts/paperless/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/paperless/Chart.yaml

@@ -0,0 +1,18 @@
+apiVersion: v2
+appVersion: 2.7.0
+description: Paperless - Index and archive all of your scanned paper documents
+name: paperless
+version: 1.0.0
+keywords:
+  - paperless
+home: https://github.com/k8s-at-home/charts/tree/master/charts/paperless
+icon: https://raw.githubusercontent.com/the-paperless-project/paperless/master/src/paperless/static/paperless/img/logo-dark.png
+sources:
+  - https://github.com/the-paperless-project/paperless
+maintainers:
+  - name: mr-onion-2
+    email: securitybyte@hotmail.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 1.7.0

charts/paperless/README.md

@@ -0,0 +1,50 @@
+# Paperless
+
+This is a helm chart for [Paperless](https://github.com/the-paperless-project/paperless). The documentation can be found here [here](https://paperless.readthedocs.io/en/latest/index.html).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/paperless
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/paperless
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+The chart's [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/paperless/values.yaml) file contains a set of suggested values for a minimal deployment. Further configuration options are found in the [common library](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml). All configuration for the Paperless application itself is through environment variables. Please refer to the links provided in chart's [values](https://github.com/k8s-at-home/charts/blob/master/charts/paperless/values.yaml) file.
+
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install paperless \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/paperless
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
+```console
+helm install paperless k8s-at-home/paperless --values values.yaml
+```
+
+## Backup & Restore
+A more elegant solution will be added, but until then your document can be exported and re-imported by running the following commands directly on the pod. [More info](https://paperless.readthedocs.io/en/latest/migrating.html).
+
+Backup: `/usr/src/paperless/src/manage.py document_exporter /path/to/somewhere/`  
+Restore: `/usr/src/paperless/src/manage.py document_importer /path/to/somewhere/`

charts/paperless/ci/ct-values.yaml

@@ -0,0 +1,17 @@
+persistence:
+  data:
+    enabled: true
+    emptyDir: true
+    mountPath: /usr/src/paperless/data
+  media:
+    enabled: true
+    emptyDir: true
+    mountPath: /usr/src/paperless/media
+  consume:
+    enabled: true
+    emptyDir: true
+    mountPath: /consume
+  export:
+    enabled: true
+    emptyDir: true
+    mountPath: /export