reintroduce helmignore (#522)

Signed-off-by: Ryan Holt <ryan@ryanholt.net>

.github/renovate.json5

@@ -2,8 +2,6 @@
   "enabled": true,
   "dependencyDashboard": true,
   "dependencyDashboardTitle": "Renovate Dashboard",
-  "commitMessagePrefix": "[{{{parentDir}}}]",
-  "branchTopic": "{{{parentDir}}}-{{{depNameSanitized}}}-{{{newMajor}}}{{#if isPatch}}.{{{newMinor}}}{{/if}}.x{{#if isLockfileUpdate}}-lockfile{{/if}}",
   "assigneesFromCodeOwners": true,
   "reviewersFromCodeOwners": true,
   "suppressNotifications": ["prIgnoreNotification"],
@@ -16,10 +14,18 @@
     "fileMatch": ["charts/.+/Chart\\.yaml$"]
   },
   "packageRules": [
+    // Setup datasources
+    {
+      "datasources": ["helm"],
+      "commitMessageTopic": "Helm chart {{depName}}",
+      "separateMinorPatch": true
+    },
     //
     // Common library dep
     //
     {
+      "commitMessagePrefix": "[{{{parentDir}}}]",
+      "branchTopic": "{{{parentDir}}}-{{{depNameSanitized}}}-{{{newMajor}}}{{#if isPatch}}.{{{newMinor}}}{{/if}}.x{{#if isLockfileUpdate}}-lockfile{{/if}}",
       "updateTypes": ["major"],
       "bumpVersion": "major",
       "labels": ["dependency/major"],
@@ -43,6 +49,8 @@
     // Other library deps
     //
     {
+      "commitMessagePrefix": "[{{{parentDir}}}]",
+      "branchTopic": "{{{parentDir}}}-{{{depNameSanitized}}}-{{{newMajor}}}{{#if isPatch}}.{{{newMinor}}}{{/if}}.x{{#if isLockfileUpdate}}-lockfile{{/if}}",
       "updateTypes": ["major"],
       "bumpVersion": "major",
       "labels": ["dependency/major"],

.github/stale.yml

@@ -0,0 +1,32 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 45
+
+# Number of days of inactivity before a stale Issue or Pull Request is closed.
+daysUntilClose: 5
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - on-hold
+  - pinned
+
+# Label to use when marking as stale
+staleLabel: stale
+
+issues:
+  # Comment to post when marking as stale. Set to `false` to disable
+  markComment: >
+    This Issue has been automatically marked as "stale" because it has not had recent activity (for 45 days). It will be closed if no further activity occurs. Thanks for the feedback.
+  # Comment to post when closing a stale Issue or Pull Request.
+  closeComment: >
+    Due to the lack of activity in the last 5 days since it was marked as "stale", we proceed to close this Issue. Do not hesitate to reopen it later if necessary.
+pulls:
+  # Comment to post when marking as stale. Set to `false` to disable
+  markComment: >
+    This Pull Request has been automatically marked as "stale" because it has not had recent activity (for 45 days). It will be closed if no further activity occurs. Thank you for your contribution.
+  # Comment to post when closing a stale Issue or Pull Request.
+  closeComment: >
+    Due to the lack of activity in the last 5 days since it was marked as "stale", we proceed to close this Pull Request. Do not hesitate to reopen it later if necessary.
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30

.github/workflows/charts-lint-test.yaml

@@ -0,0 +1,114 @@
+name: "Charts: Lint and test"
+
+on:
+  pull_request:
+    paths:
+    - 'charts/**'
+    - '!charts/**/README.md'
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    outputs:
+      changed: ${{ steps.list-changed.outputs.changed }}
+      common: ${{ steps.list-changed.outputs.common }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+        with:
+          fetch-depth: 0
+
+      - name: Install Helm
+        uses: azure/setup-helm@v1
+        with:
+          version: v3.4.0
+
+      - uses: actions/setup-python@v2
+        with:
+          python-version: 3.7
+
+      - name: Set up chart-testing
+        uses: helm/chart-testing-action@v2.0.1
+
+      - name: Run chart-testing (list-changed)
+        id: list-changed
+        run: |
+          changed=$(ct list-changed --config .github/ct.yaml)
+          if [[ -n "$changed" ]]; then
+            echo "::set-output name=changed::true"
+          fi
+
+          changed_unfiltered=$(ct list-changed --config .github/ct.yaml --excluded-charts "")
+          if [[ $(grep -E "^charts/common(-test)?$" <<< "$changed_unfiltered") ]]; then
+            echo "::set-output name=common::true"
+          fi
+
+      - name: Run chart-testing (lint)
+        id: lint
+        run: ct lint --config .github/ct.yaml --excluded-charts ""
+        if: steps.list-changed.outputs.changed == 'true' || steps.list-changed.outputs.common == 'true'
+
+  unittest:
+    runs-on: ubuntu-latest
+    needs: lint
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+        with:
+          fetch-depth: 0
+
+      - name: Install Dev tools
+        run: sudo apt-get update && sudo apt-get install -y jq libjq-dev
+
+      - name: Install Helm
+        uses: azure/setup-helm@v1
+        with:
+          version: v3.4.0
+
+      - name: Install Ruby
+        uses: ruby/setup-ruby@v1
+        with:
+          ruby-version: 2.7
+
+      - name: Install dependencies
+        run: |
+          export RUBYJQ_USE_SYSTEM_LIBRARIES=1
+          bundle install
+
+      - name: Run tests
+        run: |
+          bundle exec m -r test/charts
+
+  install:
+    runs-on: ubuntu-latest
+    needs: lint
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+        with:
+          fetch-depth: 0
+
+      - name: Install Helm
+        uses: azure/setup-helm@v1
+        with:
+          version: v3.4.0
+
+      - uses: actions/setup-python@v2
+        with:
+          python-version: 3.7
+
+      - name: Set up chart-testing
+        uses: helm/chart-testing-action@v2.0.1
+
+      - name: Create kind cluster
+        uses: helm/kind-action@v1.1.0
+        if: needs.lint.outputs.changed == 'true' || needs.lint.outputs.common == 'true'
+
+      - name: Run chart-testing (install)
+        run: ct install --config .github/ct.yaml --excluded-charts ""
+        if: needs.lint.outputs.changed == 'true'
+
+      - name: Run chart-testing (common-test)
+        run: |
+          ct install --config .github/ct.yaml --charts 'charts/common-test'
+        if: needs.lint.outputs.common == 'true'

.github/workflows/charts-release.yaml

@@ -1,11 +1,12 @@
-name: Release Charts
+name: "Charts: Release"
 
 on:
   push:
     branches:
       - master
     paths:
-      - "charts/**"
+      - 'charts/**'
+      - '!charts/**/README.md'
 
 jobs:
   pre-release:

.github/workflows/lint-test.yaml

@@ -1,55 +0,0 @@
-name: Lint and Test Charts
-
-on: pull_request
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v2
-        with:
-          fetch-depth: 0
-
-      - name: Install Helm
-        uses: azure/setup-helm@v1
-        with:
-          version: v3.4.0
-
-      - uses: actions/setup-python@v2
-        with:
-          python-version: 3.7
-
-      - name: Set up chart-testing
-        uses: helm/chart-testing-action@v2.0.1
-
-      - name: Run chart-testing (list-changed)
-        id: list-changed
-        run: |
-          changed=$(ct list-changed --config .github/ct.yaml)
-          if [[ -n "$changed" ]]; then
-            echo "::set-output name=changed::true"
-          fi
-
-          changed_unfiltered=$(ct list-changed --config .github/ct.yaml --excluded-charts "")
-          if [[ $(grep -E "^charts/common(-test)?$" <<< "$changed_unfiltered") ]]; then
-            echo "::set-output name=common::true"
-          fi
-
-      - name: Run chart-testing (lint)
-        id: lint
-        run: ct lint --config .github/ct.yaml --excluded-charts ""
-        if: steps.list-changed.outputs.common == 'true' || steps.list-changed.outputs.common == 'true'
-
-      - name: Create kind cluster
-        uses: helm/kind-action@v1.1.0
-        if: steps.list-changed.outputs.changed == 'true' || steps.list-changed.outputs.common == 'true'
-
-      - name: Run chart-testing (install)
-        run: ct install --config .github/ct.yaml
-        if: steps.list-changed.outputs.changed == 'true'
-
-      - name: Run chart-testing (common-test)
-        run: |
-          ct install --config .github/ct.yaml --charts 'charts/common-test'
-        if: steps.list-changed.outputs.common == 'true'

.gitignore

@@ -1,4 +1,16 @@
-.env
+# Developer dependencies
+.bin
+
+# IDE resources
+.vscode
 .idea
+.devcontainer/
+
+# Helm resources
 charts/*/Chart.lock
 charts/*/charts
+
+# Other rsources
+.env
+.envrc
+Gemfile.lock

.taskfiles/Taskfile_chart.yml

@@ -0,0 +1,48 @@
+---
+version: '3'
+
+tasks:
+
+  create:
+    desc: create new chart
+    cmds:
+    - git checkout -b add-chart-{{.CHART}}
+    - cp -r {{.GIT_ROOT}}/templates/chart {{.GIT_ROOT}}/charts/{{.CHART}}
+    - ./.bin/go-replace -s '${CHARTNAME}' -r "{{.CHART}}" --path={{.GIT_ROOT}}/charts/{{.CHART}} --path-pattern='*.*'
+    - task: dependency
+    - echo "Congratulations, charts/{{.CHART}} successfully generated, you can now edit chart informations ( Chart.yaml and values.yaml )"
+    status:
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}
+    deps:
+    - check-chart
+    silent: true
+
+
+  dependency:
+    cmds:
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}/Chart.lock && rm {{.GIT_ROOT}}/charts/{{.CHART}}/Chart.lock || exit 0
+    - test -d {{.GIT_ROOT}}/charts/{{.CHART}}/tmpcharts && rm -rf {{.GIT_ROOT}}/charts/{{.CHART}}/tmpcharts || exit 0
+    - cd {{.GIT_ROOT}}/charts/{{.CHART}} && helm dependency update
+    silent: true
+
+  lint:
+    desc: lint your chart code
+    cmds:
+    - cd {{.GIT_ROOT}}/charts/{{.CHART}} && helm lint
+    deps:
+    - dependency
+    - check-chart
+
+  test:
+    desc: test your chart code
+    cmds:
+    - docker run --rm -it --user $(id -u):$(id -g) -e "HELM_CONFIG_HOME=/tmp/helm" -e "HELM_CACHE_HOME=/tmp/helm" -v {{.GIT_ROOT}}:/ci -w /ci quay.io/helmpack/chart-testing:latest ct lint --charts charts/{{.CHART}} --config /ci/.github/ct.yaml
+    deps:
+    - check-chart
+    - lint
+
+  # Checks Parameters
+  check-chart:
+    cmds:
+    - cmd: test ! -z "{{.CHART}}" || (echo "Please define CHART parameter"; exit 1)
+    silent: true

.taskfiles/Taskfile_darwin.yml

@@ -0,0 +1,41 @@
+---
+version: '3'
+
+# Todo: add all darwin requirements
+
+env:
+  URL_GOREPLACE: https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-osx
+
+tasks:
+
+  install:
+    desc: Install all developer dependencies
+    deps:
+    - distrib-requirements
+    - go-replace
+
+  distrib-requirements:
+    desc: Check needed distribution packages
+    cmds:
+    - task deps:need BIN=wget
+    - task deps:need BIN=python3
+    - task deps:need BIN=docker
+    silent: true
+
+  need:
+    desc: Check needed binary is present
+    cmds:
+    - type {{.BIN}} 2>&1 >/dev/null || (echo "Please install {{.BIN}}"; exit 1)
+    silent: true
+
+  go-replace:
+    desc: Install go-replace
+    cmds:
+    - echo "Installing go-replace"
+    - mkdir -p ".bin"
+    - wget -q "https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-osx" -O .bin/go-replace && chmod +x .bin/go-replace
+    status:
+    - test -e .bin/go-replace
+    deps:
+    - distrib-requirements
+    silent: true

.taskfiles/Taskfile_linux.yml

@@ -0,0 +1,64 @@
+---
+version: '3'
+
+env:
+  URL_GOREPLACE: https://github.com/webdevops/go-replace/releases/download/1.1.2/gr-64-linux
+  URL_HELM: https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3
+
+tasks:
+
+  install:
+    desc: Install all developer dependencies
+    deps:
+    - distrib-requirements
+    - helm
+    - pre-commit
+    - go-replace
+
+  distrib-requirements:
+    desc: Check needed distribution packages
+    cmds:
+    - task deps:need BIN=wget
+    - task deps:need BIN=python3
+    - task deps:need BIN=docker
+    silent: true
+
+  need:
+    desc: Check needed binary is present
+    cmds:
+    - type {{.BIN}} 2>&1 >/dev/null || (echo "Please install {{.BIN}}"; exit 1)
+    silent: true
+
+  helm:
+    desc: Install helm client
+    cmds:
+    - echo "Installing helm"
+    - wget -q -O - "$URL_HELM" | USE_SUDO=false HELM_INSTALL_DIR=.bin bash
+    status:
+    - test -e .bin/helm
+    deps:
+    - distrib-requirements
+    silent: true
+
+  pre-commit:
+    desc: Install a precommit pip package
+    cmds:
+    - echo "Installing pre-commit"
+    - python3 -m pip install --user pre-commit
+    status:
+    - type pre-commit
+    deps:
+    - distrib-requirements
+    silent: true
+
+  go-replace:
+    desc: Install go-replace
+    cmds:
+    - echo "Installing go-replace"
+    - mkdir -p ".bin"
+    - wget -q "$URL_GOREPLACE" -O .bin/go-replace && chmod +x .bin/go-replace
+    status:
+    - test -e .bin/go-replace
+    deps:
+    - distrib-requirements
+    silent: true

.taskfiles/Taskfile_windows.yml

@@ -0,0 +1,10 @@
+---
+version: '3'
+
+# Todo: add windows requirements
+
+tasks:
+  default:
+    cmds:
+    - task -l
+    silent: true

CONTRIBUTING.md

@@ -39,6 +39,23 @@ See `git help commit`:
 
 Once changes have been merged, the release job will automatically run to package and release changed charts.
 
+### Create new chart
+```
+# Clone
+git clone
+cd charts
+sh -c "$(curl --location https://taskfile.dev/install.sh)" -- -d -b .bin
+
+# Create chart
+PATH=$PATH:$PWD/.bin
+task chart:create CHART=chart_name
+# Don't forgot edit some chart informations in charts/char_name/Chart.yaml and charts/char_name/values.yaml
+
+# Lint & Test
+task chart:lint CHART=chart_name
+task chart:test CHART=chart_name
+```
+
 ### Immutability
 
 Chart releases must be immutable. Any change to a chart warrants a chart version bump even if it is only changed to the documentation.

Gemfile

@@ -0,0 +1,12 @@
+# frozen_string_literal: true
+
+source 'https://rubygems.org'
+
+group :test do
+  gem 'm'
+  gem 'minitest'
+  gem 'minitest-implicit-subject'
+  gem 'minitest-reporters'
+  gem 'pry'
+  gem 'ruby-jq'
+end

README.md

@@ -1,9 +1,11 @@
 # k8s@Home collection of helm charts
 
-[![License](https://img.shields.io/badge/License-Apache%202.0-blue.svg)](https://opensource.org/licenses/Apache-2.0)
+[![Discord](https://img.shields.io/badge/discord-chat-7289DA.svg)](https://discord.com/invite/7PbmHRK)
 [![](https://github.com/k8s-at-home/charts/workflows/Release%20Charts/badge.svg?branch=master)](https://github.com/k8s-at-home/charts/actions)
 [![pre-commit](https://img.shields.io/badge/pre--commit-enabled-brightgreen?logo=pre-commit&logoColor=white)](https://github.com/pre-commit/pre-commit)
-[![Artifact HUB](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/k8s-at-home)](https://artifacthub.io/packages/search?repo=k8s-at-home)
+[![Artifact Hub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/k8s-at-home)](https://artifacthub.io/packages/search?repo=k8s-at-home)
+[![License](https://img.shields.io/badge/License-Apache%202.0-blue.svg)](https://opensource.org/licenses/Apache-2.0)
+
 ## Usage
 
 [Helm](https://helm.sh) must be installed to use the charts.
@@ -19,7 +21,18 @@ You can then run `helm search repo k8s-at-home` to see the charts.
 
 ## Charts
 
-See [artifact hub](https://artifacthub.io/packages/search?org=k8s-at-home) for a complete list.
+See [Artifact Hub](https://artifacthub.io/packages/search?org=k8s-at-home) or [charts](./charts/) for a complete list.
+
+## Common Library
+
+The majority of the charts in this repository are using a common library we built. The reason we went with this pattern is a lot of applications are pretty similar in their requirements for Helm charts. Using a library makes maintaining much easier and keeps charts consistent in features. If contributing a new chart first try to make it using the library we built.
+
+More information can be found [here](https://github.com/k8s-at-home/charts/tree/master/charts/common).
+
+## Support
+
+- Having problems with a chart or have a feature request? Open a new [issue](https://github.com/k8s-at-home/charts/issues/new/choose).
+- New idea? Discuss [here](https://github.com/k8s-at-home/charts/discussions) or in our [Discord](https://discord.gg/sTMX7Vh) in the `#charts` channel.
 
 ## Contributing
 

Taskfile.yml

@@ -0,0 +1,16 @@
+---
+version: '3'
+
+vars:
+  GIT_ROOT:
+    sh: git rev-parse --show-toplevel
+
+includes:
+  deps: .taskfiles/Taskfile_{{OS}}.yml
+  chart: .taskfiles/Taskfile_chart.yml
+
+tasks:
+  default:
+    cmds:
+    - task -l
+    silent: true

charts/README.templates.md.gotmpl

@@ -14,7 +14,7 @@
     {{ template "repository.organization" . }}/{{ template "chart.name" . }}
 {{- end -}}
 {{- define "badge.artifactHub" -}}
-  [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/{{ template "chart.name" . }})](https://artifacthub.io/packages/helm/{{ template "chart.name" . }})
+  [![ArtifactHub](https://img.shields.io/endpoint?url=https://artifacthub.io/badge/repository/{{ template "chart.name" . }})](https://artifacthub.io/packages/helm/k8s-at-home/{{ template "chart.name" . }})
 {{- end -}}
 {{- define "description.multiarch" -}}
 The default values and container images used in this chart will allow for running in a multi-arch cluster (amd64, arm, arm64)
@@ -69,4 +69,4 @@ For example,
 ```console
 helm install {{ template "chart.name" . }} {{ template "helm.path" . }} --values values.yaml
 ```
-{{- end -}}
+{{- end -}}

charts/alertmanager-bot/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.4.2
 description: Bot for Prometheus Alertmanager
 name: alertmanager-bot
-version: 2.0.0
+version: 2.3.1
 keywords:
   - alertmanager
   - telegram
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/alertmanager-bot/ci/ct-values.yaml

@@ -1,7 +0,0 @@
-service:
-  enabled: false
-probes:
-  liveness:
-    enabled: false
-  readiness:
-    enabled: false

charts/appdaemon/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.0.5
 description: AppDaemon is a loosely coupled, multi-threaded, sandboxed python execution environment for writing automation apps for various types of Home Automation Software including Home Assistant and MQTT.
 name: appdaemon
-version: 2.0.0
+version: 2.3.1
 keywords:
   - appdaemon
   - home-automation
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/bazarr/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v0.9.0.5
 description: Bazarr is a companion application to Sonarr and Radarr. It manages and downloads subtitles based on your requirements
 name: bazarr
-version: 5.0.0
+version: 5.3.1
 keywords:
   - bazarr
   - radarr
@@ -21,4 +21,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/bitwardenrs/Chart.yaml

@@ -2,15 +2,15 @@ apiVersion: v2
 name: bitwardenrs
 description: Unofficial Bitwarden compatible server written in Rust
 type: application
-version: 1.0.1
-appVersion: 1.16.3
+version: 2.0.0
+appVersion: 1.18.0
 keywords:
   - bitwarden
   - bitwardenrs
   - bitwarden_rs
   - password
   - rust
-home: https://github.com/k8s-at-home/charts/tree/master/charts/bitwarden_rs
+home: https://github.com/k8s-at-home/charts/tree/master/charts/bitwardenrs
 sources:
   - https://github.com/dani-garcia/bitwarden_rs
 maintainers:

charts/bitwardenrs/README.md

@@ -46,3 +46,13 @@ Alternatively, a YAML file that specifies the values for the above parameters ca
 ```console
 helm install bitwarden k8s-at-home/bitwardenrs  --values values.yaml 
 ```
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 1.1.1 -> 2.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.
+
+### Upgrading from 1.x.x to 2.x.x
+
+Chart version 2.0.0 introduces external database support.
+ * No actions required to continue with the default sqlite backend.
+ * Refer to the `bitwardenrs.externalDatabase` section of [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/bitwardenrs/values.yaml) to configure MySQL or PostgreSQL database backends.

charts/bitwardenrs/templates/_database.tpl

@@ -0,0 +1,38 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Generate environment variables for external database
+*/}}
+{{- define "bitwardenrs.externalDatabaseConfigMap" -}}
+{{- with .Values.bitwardenrs.externalDatabase }}
+{{- if and .enabled (or (eq .type "postgresql") (eq .type "mysql")) }}
+{{- if and (not .existingSecret.enabled) .user }}
+DATABASE_USER: {{ .user | quote }}
+{{- end }}
+{{- if and (not .existingSecret.enabled) .password }}
+DATABASE_PASSWORD: {{ .password | quote }}
+{{- end }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{- define "bitwardenrs.externalDatabaseEnv" -}}
+{{- with .Values.bitwardenrs.externalDatabase }}
+{{- if and .enabled (or (eq .type "postgresql") (eq .type "mysql")) }}
+{{- if .existingSecret.enabled }}
+- name: DATABASE_USER
+  valueFrom:
+    secretKeyRef:
+      name: {{ .existingSecret.name | quote }}
+      key: {{ .existingSecret.userKey | quote }}
+- name: DATABASE_PASSWORD
+  valueFrom:
+    secretKeyRef:
+      name: {{ .existingSecret.name | quote }}
+      key: {{ .existingSecret.passwordKey | quote }}
+{{- end }}
+{{- $dbport := not (empty .port) | ternary (printf ":%v" .port) "" }}
+- name: DATABASE_URL
+  value: {{ printf "%v://$(DATABASE_USER):$(DATABASE_PASSWORD)@%v%v/%v" .type .host $dbport .database }}
+{{- end }}
+{{- end }}
+{{- end }}

charts/bitwardenrs/templates/configmap.yaml

@@ -12,8 +12,8 @@ data:
   WEBSOCKET_ENABLED: {{ .Values.bitwardenrs.websockets.enabled | quote }}
   {{- if and .Values.bitwardenrs.admin.enabled .Values.bitwardenrs.admin.disableAdminToken }}
   DISABLE_ADMIN_TOKEN: "true"
-    {{- end }}
-    {{- with .Values.bitwardenrs.smtp }}
+  {{- end }}
+  {{- with .Values.bitwardenrs.smtp }}
   {{- if .enabled }}
   SMTP_HOST: {{ required "SMTP host is required to enable SMTP" .host | quote }}
   SMTP_FROM: {{ required "SMTP sender address ('from') is required to enable SMTP" .from | quote }}
@@ -31,6 +31,20 @@ data:
   {{- end }}
   {{- end }}
   {{- end }}
+  {{- with .Values.bitwardenrs.yubico }}
+  {{- if .enabled }}
+  {{- if .server }}
+  YUBICO_SERVER: {{ .server | quote }}
+  {{- end }}
+  {{- if and (not .existingSecret.enabled) .clientId }}
+  YUBICO_CLIENT_ID: {{ .clientId | quote }}
+  {{- end }}
+  {{- if and (not .existingSecret.enabled) .secretKey }}
+  YUBICO_SECRET_KEY: {{ .secretKey | quote }}
+  {{- end }}
+  {{- end }}
+  {{- end }}
+  {{- include "bitwardenrs.externalDatabaseConfigMap" . | nindent 2 }}
   {{- if .Values.env }}
   {{- toYaml .Values.env | nindent 2 }}
   {{- end }}

charts/bitwardenrs/templates/deployment.yaml

@@ -54,11 +54,11 @@ spec:
                   {{- else }}
                   name: {{ $fullName }}
                   key: admin-token
-                {{- end }}
-                {{- end }}
-                {{- end }}
-                {{- with .Values.bitwardenrs.smtp }}
-                {{- if eq .enabled true }}
+                  {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- with .Values.bitwardenrs.smtp }}
+            {{- if eq .enabled true }}
             {{- if and .existingSecret.enabled (not .user) }}
             - name: SMTP_USERNAME
               valueFrom:
@@ -70,12 +70,27 @@ spec:
                 secretKeyRef:
                   name: {{ .existingSecret.name | quote }}
                   key: {{ .existingSecret.passwordKey | quote }}
-              {{- end }}
-          {{- end }}
-          {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- with .Values.bitwardenrs.yubico }}
+            {{- if and .enabled .existingSecret.enabled }}
+            - name: YUBICO_CLIENT_ID
+              valueFrom:
+                secretKeyRef:
+                  name: {{ .existingSecret.name | quote }}
+                  key: {{ .existingSecret.clientIdKey | quote }}
+            - name: YUBICO_SECRET_KEY
+              valueFrom:
+                secretKeyRef:
+                  name: {{ .existingSecret.name | quote }}
+                  key: {{ .existingSecret.secretKeyKey | quote }}
+            {{- end }}
+            {{- end }}
+            {{- include "bitwardenrs.externalDatabaseEnv" . | nindent 12 }}
           ports:
             - name: http
-              containerPort: 80
+              containerPort: {{ .Values.bitwardenrs.gui.port }}
               protocol: TCP
             {{- if .Values.bitwardenrs.websockets.enabled }}
             - name: websocket

charts/bitwardenrs/templates/ingress.yaml

@@ -1,6 +1,7 @@
 {{- if .Values.ingress.enabled -}}
 {{- $fullName := include "bitwardenrs.fullname" . -}}
 {{- $svcPort := .Values.service.port -}}
+{{- $websockets := .Values.bitwardenrs.websockets -}}
 {{- if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
 apiVersion: networking.k8s.io/v1beta1
 {{- else -}}
@@ -36,6 +37,16 @@ spec:
             backend:
               serviceName: {{ $fullName }}
               servicePort: {{ $svcPort }}
+          {{- if $websockets.enabled }}
+          - path: {{ . | trimSuffix "/" }}/notifications/hub
+            backend:
+              serviceName: {{ $fullName }}
+              servicePort: {{ $websockets.port }}
+          - path: {{ . | trimSuffix "/" }}/notifications/hub/negotiate
+            backend:
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort}}
+          {{- end }}
           {{- end }}
     {{- end }}
   {{- end }}

charts/bitwardenrs/templates/statefulset.yaml

@@ -55,11 +55,11 @@ spec:
                   {{- else }}
                   name: {{ $fullName }}
                   key: admin-token
-                {{- end }}
-                {{- end }}
-                {{- end }}
-                {{- with .Values.bitwardenrs.smtp }}
-                {{- if eq .enabled true }}
+                  {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- with .Values.bitwardenrs.smtp }}
+            {{- if eq .enabled true }}
             {{- if and .existingSecret.enabled (not .user) }}
             - name: SMTP_USERNAME
               valueFrom:
@@ -71,12 +71,27 @@ spec:
                 secretKeyRef:
                   name: {{ .existingSecret.name | quote }}
                   key: {{ .existingSecret.passwordKey | quote }}
-              {{- end }}
-          {{- end }}
-          {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- end }}
+            {{- with .Values.bitwardenrs.yubico }}
+            {{- if and .enabled .existingSecret.enabled }}
+            - name: YUBICO_CLIENT_ID
+              valueFrom:
+                secretKeyRef:
+                  name: {{ .existingSecret.name | quote }}
+                  key: {{ .existingSecret.clientIdKey | quote }}
+            - name: YUBICO_SECRET_KEY
+              valueFrom:
+                secretKeyRef:
+                  name: {{ .existingSecret.name | quote }}
+                  key: {{ .existingSecret.secretKeyKey | quote }}
+            {{- end }}
+            {{- end }}
+            {{- include "bitwardenrs.externalDatabaseEnv" . | nindent 12 }}
           ports:
             - name: http
-              containerPort: 80
+              containerPort: {{ .Values.bitwardenrs.gui.port }}
               protocol: TCP
             {{- if .Values.bitwardenrs.websockets.enabled }}
             - name: websocket

charts/bitwardenrs/values.yaml

@@ -14,6 +14,9 @@ fullnameOverride: ""
 bitwardenrs:
   domain: ""
   signupsAllowed: false
+  gui:
+    # If you set a different port here, you must also provide it under env
+    port: 80
   websockets:
     enabled: true
     port: 3012
@@ -24,6 +27,31 @@ bitwardenrs:
       enabled: false
       name: ""
       tokenKey: ""
+  # External database configuration.
+  # Requires bitwardenrs/server >= 1.17.0 or bitwardenrs/server-{mysql,postgres} images
+  # ref: https://github.com/dani-garcia/bitwarden_rs/wiki/Using-the-MySQL-Backend
+  #      https://github.com/dani-garcia/bitwarden_rs/wiki/Using-the-PostgreSQL-Backend
+  externalDatabase:
+    enabled: false
+    # Supported values: 'mysql', 'postgresql'.
+    type: ""
+    # Database host. Required if external database is enabled.
+    host: ""
+    # Database port. Optional, default value is specific to the database backend.
+    port: ""
+    # Database name.
+    database: ""
+    # Database user.
+    user: ""
+    # Database password. Special characters must be escaped with percent encoding.
+    password: ""
+    # Use existing secret for database credentials.
+    existingSecret:
+      enabled: false
+      name: ""
+      userKey: ""
+      # Special characters in the password value must be escaped with percent encoding.
+      passwordKey: ""
   # Enable SMTP. https://github.com/dani-garcia/bitwarden_rs/wiki/SMTP-configuration
   smtp:
     enabled: false
@@ -47,8 +75,26 @@ bitwardenrs:
       name: ""
       userKey: ""
       passwordKey: ""
+  # Enable Yubikey 2FA: https://github.com/dani-garcia/bitwarden_rs/wiki/Enabling-Yubikey-OTP-authentication
+  yubico:
+    enabled: false
+    # OTP verification server. Will use the default YubiCloud servers if not specified
+    server: ""
+    # API Client ID for OTP server. Ignored if existingSecret is provided.
+    clientId: ""
+    # API Secret Key for OTP server. Required if clientId is specified, ignored when using existingSecret.
+    secretKey: ""
+    # Use existing secret for API keys
+    existingSecret:
+      enabled: false
+      name: ""
+      clientIdKey: ""
+      secretKeyKey: ""
 
 env: {}
+# If you plan to run the WebUI on a port other than port 80, specify that here:
+# For example, if running the container as a non-root user.
+#  ROCKET_PORT: "80"
 
 persistence:
   type: statefulset

charts/blocky/Chart.yaml

@@ -1,11 +1,12 @@
 apiVersion: v2
-appVersion: v0.11
+appVersion: v0.12
 description: DNS proxy as ad-blocker for local network
 name: blocky
-version: 4.1.0
+version: 5.0.0
 keywords:
   - blocky
-  - dbs
+  - adblock
+  - dns
 home: https://github.com/k8s-at-home/charts/tree/master/charts/blocky
 icon: https://github.com/0xERR0R/blocky/raw/master/docs/blocky.svg?sanitize=true
 sources:

charts/blocky/README.md

@@ -47,6 +47,8 @@ Alternatively, a YAML file that specifies the values for the above parameters ca
 helm install --name blocky -f values.yaml k8s-at-home/blocky
 ```
 
+---
+
 ## Upgrading an existing Release to a new major version
 
 A major chart version change (like 2.2.2 -> 3.0.0) indicates that there is an
@@ -72,3 +74,6 @@ kubectl delete svc/blocky
 
 This is the 'easiest' approach, but will incur downtime which can be problematic if you rely on blocky for DNS
 
+### Upgrading from 4.x.x to 5.x.x
+
+Configuration inside `config` is no longer a yaml object, it is now a multiline string

charts/blocky/templates/configmap.yaml

@@ -9,12 +9,5 @@ metadata:
     app.kubernetes.io/instance: {{ .Release.Name }}
     app.kubernetes.io/managed-by: {{ .Release.Service }}
 data:
-{{- if .Values.config }}
-{{ $root := . }}
   config.yml: |
-{{ tpl (toYaml .Values.config | indent 4) $root }}
-{{- end }}
-{{- range $name, $value := .Values.extraLists }}
-  {{ $name }}: |-
-{{ $value | indent 4}}
-{{- end }}
+{{ .Values.config | indent 4 }}

charts/blocky/templates/deployment.yaml

@@ -1,3 +1,4 @@
+{{- $blockyConfig := .Values.config | fromYaml }}
 apiVersion: apps/v1
 kind: Deployment
 metadata:
@@ -45,9 +46,9 @@ spec:
               subPath: {{ $name }}
               readOnly: true
             {{- end }}
-            {{- if .Values.config.queryLog }}
+            {{- if hasKey $blockyConfig "queryLog" }}
             - name: data
-              mountPath: {{ .Values.config.queryLog.dir }}
+              mountPath: {{ $blockyConfig.queryLog.dir }}
               {{- if .Values.persistence.subPath }}
               subPath: {{ .Values.persistence.subPath }}
               {{- end }}
@@ -63,19 +64,19 @@ spec:
               protocol: UDP
           livenessProbe:
             httpGet:
-              path: /metrics
+              path: /
               port: api
             failureThreshold: {{ .Values.probes.liveness.failureThreshold }}
             periodSeconds: {{ .Values.probes.liveness.periodSeconds }}
           readinessProbe:
             httpGet:
-              path: /metrics
+              path: /
               port: api
             failureThreshold: {{ .Values.probes.readiness.failureThreshold }}
             periodSeconds: {{ .Values.probes.readiness.periodSeconds }}
           startupProbe:
             httpGet:
-              path: /metrics
+              path: /
               port: api
             initialDelaySeconds: {{ .Values.probes.startup.initialDelaySeconds }}
             failureThreshold: {{ .Values.probes.startup.failureThreshold }}
@@ -96,7 +97,7 @@ spec:
                     - key: {{ $name }}
                       path: {{ $name }}
                   {{- end }}
-        {{- if .Values.config.queryLog }}
+        {{- if hasKey $blockyConfig "queryLog" }}
         - name: data
           {{- if .Values.persistence.enabled }}
           persistentVolumeClaim:

charts/blocky/values.yaml

@@ -1,8 +1,6 @@
-replicaCount: 1
-
 image:
   repository: spx01/blocky
-  tag: v0.11
+  tag: v0.12
   pullPolicy: IfNotPresent
 
 nameOverride: ""
@@ -12,29 +10,30 @@ replicas: 1
 
 timeZone: "UTC"
 
-# blocky configuration - will translate to config.yml file inside the pod
-config:
+# Blocky configuration, for a full list of options see
+# https://github.com/0xERR0R/blocky/blob/master/docs/config.yml
+config: |
   upstream:
     # these external DNS resolvers will be used. Blocky picks 2 random resolvers from the list for each query
-    # format for resolver: net:host:[port][/path]. net could be tcp, udp, tcp-tls or https (DoH). If port is empty, default port will be used (53 for udp and tcp, 853 for tcp-tls, 443 for https (Doh))
+    # format for resolver: [net:]host:[port][/path]. net could be empty (default, shortcut for tcp+udp), tcp+udp, tcp, udp, tcp-tls or https (DoH). If port is empty, default port will be used (53 for udp and tcp, 853 for tcp-tls, 443 for https (Doh))
     externalResolvers:
-      - udp:8.8.8.8
-      - udp:8.8.4.4
-      - udp:1.1.1.1
-      - tcp-tls:1.0.0.1:853
-      - https://cloudflare-dns.com/dns-query
+      - 46.182.19.48
+      - 80.241.218.68
+      - tcp-tls:fdns1.dismail.de:853
+      - https://dns.digitale-gesellschaft.ch/dns-query
 
   # optional: custom IP address for domain name (with all sub-domains)
   # example: query "printer.lan" or "my.printer.lan" will return 192.168.178.3
-  # customDNS:
-  #   mapping:
-  #     printer.lan: 192.168.178.3
+  customDNS:
+    mapping:
+      printer.lan: 192.168.178.3
 
-  # optional: definition, which DNS resolver should be used for queries to the domain (with all sub-domains).
+  # optional: definition, which DNS resolver(s) should be used for queries to the domain (with all sub-domains). Multiple resolvers must be separated by comma
   # Example: Query client.fritz.box will ask DNS server 192.168.178.1. This is necessary for local network, to resolve clients by host name
-  # conditional:
-  #   mapping:
-  #     fritz.box: udp:192.168.178.1
+  conditional:
+    mapping:
+      fritz.box: udp:192.168.178.1
+      lan.net: udp:192.168.178.1,udp:192.168.178.2
 
   # optional: use black and white lists to block queries (for example ads, trackers, adult pages etc.)
   blocking:
@@ -48,77 +47,95 @@ config:
         - https://zeustracker.abuse.ch/blocklist.php?download=domainblocklist
         - https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
       special:
-        - https://hosts-file.net/ad_servers.txt
-    # definition of whitelist groups. Attention: if the same group has black and whitelists,
-    # whitelists will be used to disable particular blacklist entries. If a group has only
-    # whitelist entries -> this means only domains from this list are allowed,
-    # all other domains will be blocked.
-    # Also see the extraLists section below to add your own in-line whitelists
-    # whiteLists:
-    #   ads:
-    #     - whitelist.txt
+        - https://raw.githubusercontent.com/StevenBlack/hosts/master/alternates/fakenews/hosts
+    # definition of whitelist groups. Attention: if the same group has black and whitelists, whitelists will be used to disable particular blacklist entries. If a group has only whitelist entries -> this means only domains from this list are allowed, all other domains will be blocked
+    whiteLists:
+      ads:
+        - whitelist.txt
     # definition: which groups should be applied for which client
     clientGroupsBlock:
       # default will be used, if no special definition for a client name exists
       default:
         - ads
         - special
-      # use client name or ip address
-      # laptop.fritz.box:
-      #   - ads
-
+      # use client name (with wildcard support: * - sequence of any characters, [0-9] - range)
+      # or single ip address / client subnet as CIDR notation
+      laptop*:
+        - ads
+      192.168.178.1/24:
+        - special
     # which response will be sent, if query is blocked:
-    #   zeroIp: 0.0.0.0 will be returned (default)
-    #   nxDomain: return NXDOMAIN as return code
-    # blockType: zeroIp
-
+    # zeroIp: 0.0.0.0 will be returned (default)
+    # nxDomain: return NXDOMAIN as return code
+    # comma separated list of destination IP adresses (for example: 192.100.100.15, 2001:0db8:85a3:08d3:1319:8a2e:0370:7344). Should contain ipv4 and ipv6 to cover all query types. Useful with running web server on this address to display the "blocked" page.
+    blockType: zeroIp
     # optional: automatically list refresh period in minutes. Default: 4h.
     # Negative value -> deactivate automatically refresh.
     # 0 value -> use default
-    # refreshPeriod: 1
+    refreshPeriod: 0
 
   # optional: configuration for caching of DNS responses
-  # caching:
-  #   # amount in minutes, how long a response must be cached (min value).
-  #   # If <=0, use response's TTL, if >0 use this value, if TTL is smaller
-  #   # Default: 0
-  #   minTime: 40
-  #   # amount in minutes, how long a response must be cached (max value).
-  #   # If <0, do not cache responses
-  #   # If 0, use TTL
-  #   # If > 0, use this value, if TTL is greater
-  #   # Default: 0
-  #   maxTime: -1
+  caching:
+    # amount in minutes, how long a response must be cached (min value).
+    # If <=0, use response's TTL, if >0 use this value, if TTL is smaller
+    # Default: 0
+    minTime: 5
+    # amount in minutes, how long a response must be cached (max value).
+    # If <0, do not cache responses
+    # If 0, use TTL
+    # If > 0, use this value, if TTL is greater
+    # Default: 0
+    maxTime: -1
+    # if true, will preload DNS results for often used queries (names queried more than 5 times in a 2 hour time window)
+    # this improves the response time for often used queries, but significantly increases external traffic
+    # default: false
+    prefetching: true
 
   # optional: configuration of client name resolution
-  # clientLookup:
-  #   # this DNS resolver will be used to perform reverse DNS lookup (typically local router)
-  #   upstream: udp:192.168.178.1
-  #   # optional: some routers return multiple names for client (host name and user defined name). Define which single name should be used.
-  #   # Example: take second name if present, if not take first name
-  #   singleNameOrder:
-  #     - 2
-  #     - 1
+  clientLookup:
+    # optional: this DNS resolver will be used to perform reverse DNS lookup (typically local router)
+    upstream: udp:192.168.178.1
+    # optional: some routers return multiple names for client (host name and user defined name). Define which single name should be used.
+    # Example: take second name if present, if not take first name
+    singleNameOrder:
+      - 2
+      - 1
+    # optional: custom mapping of client name to IP addresses. Useful if reverse DNS does not work properly or just to have custom client names.
+    clients:
+      laptop:
+        - 192.168.178.29
+
   # optional: configuration for prometheus metrics endpoint
-  prometheus:
-    # enabled if true
-    enable: true
-    # url path, optional (default '/metrics')
-    path: /metrics
+  # prometheus:
+  #   # enabled if true
+  #   enable: true
+  #   # url path, optional (default '/metrics')
+  #   path: /metrics
 
   # optional: write query information (question, answer, client, duration etc) to daily csv file
   # queryLog:
-  #     # directory (will be mounted as volume in the pod)
-  #     dir: /logs
-  #     # if true, write one file per client. Writes all queries to single file otherwise
-  #     perClient: true
-  #     # if > 0, deletes log files which are older than ... days
-  #     logRetentionDays: 7
+  #   # directory (should be mounted as volume in docker)
+  #   dir: /logs
+  #   # if true, write one file per client. Writes all queries to single file otherwise
+  #   perClient: true
+  #   # if > 0, deletes log files which are older than ... days
+  #   logRetentionDays: 7
 
-  # optional: HTTP listener port, default 0 = no http listener. If > 0, will be used for prometheus metrics, pprof, ...
+  # optional: DNS listener port and bind ip address, default 53 (UDP and TCP). Example: 53, :53, 127.0.0.1:53
+  port: 53
+  # optional: HTTP listener port, default 0 = no http listener. If > 0, will be used for prometheus metrics, pprof, REST API, DoH ...
   httpPort: 4000
+  # optional: HTTPS listener port, default 0 = no http listener. If > 0, will be used for prometheus metrics, pprof, REST API, DoH...
+  #httpsPort: 443
+  # mandatory, if https port > 0: path to cert and key file for SSL encryption
+  #httpsCertFile: server.crt
+  #httpsKeyFile: server.key
+  # optional: use this DNS server to resolve blacklist urls and upstream DNS servers (DOH). Useful if no DNS resolver is configured and blocky needs to resolve a host name. Format net:IP:port, net must be udp or tcp
+  bootstrapDns: tcp:1.1.1.1
   # optional: Log level (one from debug, info, warn, error). Default: info
   logLevel: info
+  # optional: Log format (text or json). Default: text
+  logFormat: text
 
 ## Add persistence for query logs (if enabled)
 persistence:

charts/booksonic-air/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2009.1.0
 description: Booksonic is a platform for accessing the audibooks you own wherever you are
 name: booksonic-air
-version: 2.0.0
+version: 2.3.1
 keywords:
   - booksonic
   - audiobook
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/booksonic-air/ci/ct-values.yaml

@@ -1,2 +0,0 @@
-ingress:
-  enabled: true

charts/calibre-web/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 0.6.9
 description: Calibre-Web is a web app providing a clean interface for browsing, reading and downloading eBooks using an existing Calibre database.
 name: calibre-web
-version: 4.0.0
+version: 4.3.1
 keywords:
   - calibre
   - ebook
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/calibre-web/ci/ct-values.yaml

@@ -1,2 +0,0 @@
-ingress:
-  enabled: true

charts/common/CHANGELOG.md

@@ -4,6 +4,35 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [2.2.1]
+
+### Fixed
+
+- Made explicit that `service.port.targetPort` cannot be a named port.
+
+## [2.2.0]
+
+### Added
+
+- Allow serviceLinks to be enabled/disabled.
+- Support for ingressClassName on apiVersion `networking.k8s.io/v1` by setting `ingress.ingressClassName`.
+- Added some initial proper unit tests for the `common` chart.
+
+### Changed
+
+- `service.port.targetPort` is now used in the container spec instead of `service.port.port` if specified. This allows for different service and container ports. (Implements [#465](https://github.com/k8s-at-home/charts/issues/465)).
+
+### Fixed
+
+- Document setting environment variables for code-server add-on in `values.yaml` (Fixes [#436](https://github.com/k8s-at-home/charts/issues/436)).
+- Set service targetPort to the service port name first if no `targetPort` value is given.
+
+## [2.1.0]
+
+### Added
+
+- Allow for additional arguments to be added to code-server runtime via `addons.codeserver.args`
+
 ## [2.0.4]
 
 ### Fixed
@@ -30,6 +59,12 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 This is the last version before starting this changelog. All sorts of cool stuff was changed, but only `git log` remembers what that was :slightly_frowning_face:
 
+[2.2.1]: https://github.com/k8s-at-home/charts/tree/common-2.2.1/charts/common
+
+[2.2.0]: https://github.com/k8s-at-home/charts/tree/common-2.2.0/charts/common
+
+[2.1.0]: https://github.com/k8s-at-home/charts/tree/common-2.1.0/charts/common
+
 [2.0.4]: https://github.com/k8s-at-home/charts/tree/common-2.0.4/charts/common
 
 [2.0.0]: https://github.com/k8s-at-home/charts/tree/common-2.0.0/charts/common

charts/common/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 name: common
 description: Function library for k8s-at-home charts
 type: library
-version: 2.0.4
+version: 2.2.1
 keywords:
   - k8s-at-home
   - common

charts/common/templates/addons/code-server/_container.tpl

@@ -24,10 +24,11 @@ ports:
   containerPort: {{ .Values.addons.codeserver.service.port.port }}
   protocol: TCP
 args:
+{{- range .Values.addons.codeserver.args }}
+- {{ . | quote }}
+{{- end }}
 - "--port"
 - "{{ .Values.addons.codeserver.service.port.port }}"
-- "--auth"
-- "none"
 - {{ .Values.addons.codeserver.workingDir | default (first .Values.addons.codeserver.volumeMounts).mountPath }}
 {{- with .Values.addons.codeserver.volumeMounts }}
 volumeMounts:

charts/common/templates/classes/_ingress.tpl

@@ -26,6 +26,11 @@ metadata:
     {{- toYaml . | nindent 4 }}
   {{- end }}
 spec:
+  {{- if eq (include "common.capabilities.ingress.apiVersion" $) "networking.k8s.io/v1" }}
+  {{- if $values.ingressClassName }}
+  ingressClassName: {{ $values.ingressClassName }}
+  {{- end }}
+  {{- end }}
   {{- if $values.tls }}
   tls:
     {{- range $values.tls }}

charts/common/templates/classes/_service_ports.tpl

@@ -12,7 +12,7 @@ Render all the ports and additionalPorts for a Service object.
   ports:
   {{- range $_ := $ports }}
   - port: {{ .port }}
-    targetPort: {{ .targetPort | default "http" }}
+    targetPort: {{ .targetPort | default .name | default "http" }}
     protocol: {{ .protocol | default "TCP" }}
     name: {{ .name | default "http" }}
     {{- if (and (eq $.svcType "NodePort") (not (empty .nodePort))) }}

charts/common/templates/lib/controller/_container.tpl

@@ -29,6 +29,9 @@ The main container included in the controller.
   {{- if $PVC.enabled }}
   - mountPath: {{ $PVC.mountPath }}
     name: {{ $index }}
+  {{- if $PVC.subPath }}
+    subPath: {{ $PVC.subPath }}
+  {{- end }}
   {{- end }}
   {{- end }}
   {{- if .Values.additionalVolumeMounts }}

charts/common/templates/lib/controller/_pod.tpl

@@ -21,6 +21,7 @@ dnsPolicy: {{ . }}
 dnsConfig:
   {{- toYaml . | nindent 2 }}
 {{- end }}
+enableServiceLinks: {{ .Values.enableServiceLinks }}
 {{- with .Values.initContainers }}
 initContainers:
   {{- toYaml . | nindent 2 }}

charts/common/templates/lib/controller/_ports.tpl

@@ -32,7 +32,10 @@ Ports included by the controller.
 ports:
 {{- range $_ := $ports }}
 - name: {{ .name }}
-  containerPort: {{ .port }}
+  {{- if and .targetPort (kindIs "string" .targetPort) }}
+  {{- fail (printf "Our charts do not support named ports for targetPort. (port name %s, targetPort %s)" .name .targetPort) }}
+  {{- end }}
+  containerPort: {{ .targetPort | default .port }}
   protocol: {{ .protocol | default "TCP" }}
 {{- end -}}
 {{- end -}}

charts/common/values.yaml

@@ -51,6 +51,11 @@ dnsPolicy: ClusterFirst
 #     - name: ndots
 #       value: "1"
 
+# Enable/disable the generation of environment variables for services.
+# See https://kubernetes.io/docs/concepts/services-networking/connect-applications-service/#accessing-the-service
+# for more information.
+enableServiceLinks: true
+
 initContainers: []
 
 additionalContainers: []
@@ -96,13 +101,15 @@ probes:
 service:
   enabled: true
   type: ClusterIP
-  # Specify the default port information
+  ## Specify the default port information
   port:
     port:
-    # name defaults to http
+    ## name defaults to http
     name:
     protocol: TCP
-    # targetPort defaults to http
+    ## Specify a service targetPort if you wish to differ the service port from the application port.
+    ## If targetPort is specified, this port number is used in the container definition instead of
+    ## service.port.port. Therefore named ports are not supported for this field.
     targetPort:
     ## Specify the nodePort value for the LoadBalancer and NodePort service types.
     ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
@@ -314,6 +321,18 @@ addons:
       pullPolicy: IfNotPresent
       tag: 3.7.4
 
+    # Set any environment variables for code-server here
+    env: {}
+      # TZ: UTC
+
+    # Set codeserver command line arguments
+    # consider setting --user-data-dir to a persistent location to preserve code-server setting changes
+    args:
+      - --auth
+      - none
+      # - --user-data-dir
+      # - "/config/.vscode"
+
     # Specify a list of volumes that get mounted in the code-server container.
     # At least 1 volumeMount is required!
     volumeMounts: []

charts/couchpotato/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: latest
 description: CouchPotato (CP) is an automatic NZB and torrent downloader.
 name: couchpotato
-version: 4.0.0
+version: 4.3.1
 keywords:
   - couchpotato
   - usenet
@@ -18,4 +18,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/couchpotato/ci/ct-values.yaml

@@ -1,2 +0,0 @@
-ingress:
-  enabled: true

charts/dashmachine/Chart.yaml

@@ -4,7 +4,7 @@ description: DashMachine is another web application bookmark dashboard, with fun
 icon: https://github.com/rmountjoy92/DashMachine/raw/master/dashmachine/static/images/logo/logo.png
 home: https://github.com/rmountjoy92/DashMachine
 name: dashmachine
-version: 3.0.0
+version: 3.3.1
 sources:
   - https://github.com/rmountjoy92/DashMachine
 maintainers:
@@ -12,5 +12,5 @@ maintainers:
     email: ryan@ryanholt.net
 dependencies:
   - name: common
-    version: 2.0.3
+    version: 2.2.1
     repository: https://k8s-at-home.com/charts/

charts/dashmachine/ci/ct-values.yaml

@@ -1,2 +0,0 @@
-ingress:
-  enabled: true

charts/ddclient/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 3.9.1
 description: Perl client used to update dynamic DNS entries for accounts on Dynamic DNS Network Service Providers
 name: ddclient
-version: 2.0.0
+version: 2.3.1
 keywords:
   - ddclient
   - dns
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/ddclient/ci/ct-values.yaml

@@ -1,7 +1,2 @@
 service:
   enabled: false
-probes:
-  liveness:
-    enabled: false
-  readiness:
-    enabled: false

charts/ddclient/values.yaml

@@ -18,6 +18,8 @@ probes:
     enabled: false
   readiness:
     enabled: false
+  startup:
+    enabled: false
 
 strategy:
   type: Recreate

charts/deluge/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+# OWNERS file for Kubernetes
+OWNERS
+.vscode/

charts/deluge/Chart.yaml

@@ -0,0 +1,20 @@
+apiVersion: v2
+appVersion: v2.0.3-2201906121747
+description: Deluge is a torrent download client
+name: deluge
+version: 1.1.1
+keywords:
+  - deluge
+  - torrent
+home: https://github.com/k8s-at-home/charts/tree/master/charts/deluge
+icon: https://avatars2.githubusercontent.com/u/6733935?v=3&s=200
+sources:
+  - https://hub.docker.com/r/linuxserver/deluge/
+  - https://deluge-torrent.org/
+maintainers:
+  - name: mcmarkj
+    email: mark@markmcw.uk
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/deluge/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/deluge/README.md

@@ -0,0 +1,57 @@
+# Deluge
+
+This is a helm chart for [Deluge](https://deluge-torrent.org/).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/deluge
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/deluge
+```
+
+The default login details (change ASAP) are:
+
+* password:deluge
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/deluge/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install deluge \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/deluge
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install deluge k8s-at-home/deluge --values values.yaml
+```
+
+These values will be nested as it is a dependency, for example
+```yaml
+image:
+  tag: ...
+```

charts/deluge/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/deluge/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/deluge/values.yaml

@@ -0,0 +1,45 @@
+# Default values for deluge.
+
+image:
+  repository: linuxserver/deluge
+  pullPolicy: IfNotPresent
+  tag: version-2.0.3-2201906121747ubuntu18.04.1
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 8112
+
+persistence:
+  config:
+    enabled: false
+    emptyDir: false
+    mountPath: /config
+
+  downloads:
+    enabled: false
+    emptyDir: false
+    mountPath: /downloads
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""
+
+env: {}
+  ## Optional ENV Vars that can be set.
+  ## All values below are the current default values.
+  # PUID: "1000"
+  # PGID: "1000"
+  # TZ: "Europe/London"
+  # UMASK_SET: "022"
+  # DELUGE_LOGLEVEL: "error"

charts/dsmr-reader/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/dsmr-reader/Chart.yaml

@@ -0,0 +1,24 @@
+apiVersion: v2
+appVersion: v4.9.0
+description: DSMR-protocol reader, telegram data storage and energy consumption visualizer.
+name: dsmr-reader
+version: 1.1.1
+keywords:
+- dsmr-reader
+- energy
+home: https://github.com/k8s-at-home/charts/tree/master/charts/dsmr-reader
+icon: https://avatars2.githubusercontent.com/u/57727360?s=400&v=4
+sources:
+- https://github.com/dsmrreader/dsmr-reader
+- https://github.com/xirixiz/dsmr-reader-docker
+maintainers:
+- name: billimek
+  email: jeff@billimek.com
+dependencies:
+- name: common
+  repository: https://k8s-at-home.com/charts/
+  version: 2.2.1
+- name: postgresql
+  version: 10.2.0
+  repository: https://charts.bitnami.com/bitnami
+  condition: postgresql.enabled

charts/dsmr-reader/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/dsmr-reader/README.md

@@ -0,0 +1,67 @@
+# DSMR-reader
+
+This is a helm chart for [DSMR-reader](https://github.com/dsmrreader/dsmr-reader).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/dsmr-reader
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/dsmr-reader
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/dsmr-reader/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install dsmr-reader \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/dsmr-reader
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install dsmr-reader k8s-at-home/dsmr-reader --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/dsmr-reader/ci/ct-values.yaml

@@ -0,0 +1,9 @@
+fullnameOverride: dsmr-reader
+
+env:
+  DATALOGGER_MODE: receiver
+  DJANGO_DATABASE_HOST: dsmr-reader-db
+
+postgresql:
+  enabled: true
+  fullnameOverride: dsmr-reader-db

charts/dsmr-reader/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/dsmr-reader/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/dsmr-reader/values.yaml

@@ -0,0 +1,47 @@
+# Default values for dsmr-reader.
+
+image:
+  repository: xirixiz/dsmr-reader-docker
+  pullPolicy: IfNotPresent
+  tag: latest-v4.9.0-amd64
+
+securityContext:
+  privileged: true
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+# For all options see https://github.com/xirixiz/dsmr-reader-docker#dsmr-reader---environment-variables
+env:
+  # TZ: UTC
+  # DJANGO_TIME_ZONE: UTC
+  DJANGO_DATABASE_USER: dsmr-reader
+  DJANGO_DATABASE_PASSWORD: dsmr-reader-pass
+  DJANGO_DATABASE_PORT: 5432
+  DJANGO_DATABASE_NAME: dsmr-reader
+
+# Path to your p1 reader device in the container
+# additionalVolumeMounts:
+# - name: p1reader
+#   mountPath: /dev/ttyUSB0
+
+# Path to your p1 reader device on the host
+# additionalVolumes:
+# - name: p1reader
+#   hostPath:
+#     path: /dev/ttyUSB0
+
+# Enable postgres
+# ... for more options see https://github.com/bitnami/charts/tree/master/bitnami/postgresql
+postgresql:
+  enabled: false
+  postgresqlUsername: dsmr-reader
+  postgresqlPassword: dsmr-reader-pass
+  postgresqlDatabase: dsmr-reader
+  persistence:
+    enabled: false
+    # storageClass: ""

charts/esphome/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.15.3
 description: ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
 name: esphome
-version: 4.0.0
+version: 4.3.1
 keywords:
   - esphome
   - home-automation
@@ -16,4 +16,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/esphome/ci/ct-values.yaml

@@ -1,4 +1,2 @@
 env:
   ESPHOME_DASHBOARD_USE_PING: true
-ingress:
-  enabled: true

charts/flaresolverr/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/flaresolverr/Chart.yaml

@@ -0,0 +1,19 @@
+apiVersion: v2
+appVersion: v1.2.3
+description: FlareSolverr is a proxy server to bypass Cloudflare protection
+name: flaresolverr
+version: 1.0.0
+keywords:
+  - flaresolverr
+  - jackett
+home: https://github.com/k8s-at-home/charts/tree/master/charts/flaresolverr
+sources:
+  - https://github.com/FlareSolverr/FlareSolverr
+  - https://hub.docker.com/r/flaresolverr/flaresolverr
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/flaresolverr/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/flaresolverr/README.md

@@ -0,0 +1,67 @@
+# FlareSolverr
+
+This is a helm chart for [FlareSolverr](https://github.com/FlareSolverr/FlareSolverr).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/flaresolverr
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/flaresolverr
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/flaresolverr/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install flaresolverr \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/flaresolverr
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install flaresolverr k8s-at-home/flaresolverr --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/flaresolverr/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/flaresolverr/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/flaresolverr/values.yaml

@@ -0,0 +1,16 @@
+# Default values for FlareSolverr.
+
+image:
+  repository: flaresolverr/flaresolverr
+  pullPolicy: IfNotPresent
+  tag: v1.2.3
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 8191
+
+env: {}
+  # LOG_LEVEL: UTC

charts/flood/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 4.1.1
 description: Flood is a monitoring service for various torrent clients
 name: flood
-version: 2.0.0
+version: 2.3.1
 keywords:
   - flood
   - rtorrent
@@ -19,4 +19,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/flood/ci/ct-values.yaml

@@ -1,5 +1,3 @@
-ingress:
-  enabled: true
 persistence:
   data:
     enabled: true

charts/freshrss/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 1.17.0
 description: FreshRSS is a self-hosted RSS feed aggregator
 name: freshrss
-version: 2.0.0
+version: 2.3.1
 keywords:
   - freshrss
   - rss
@@ -17,4 +17,4 @@ maintainers:
 dependencies:
   - name: common
     repository: https://k8s-at-home.com/charts/
-    version: 2.0.3
+    version: 2.2.1

charts/gaps/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/gaps/Chart.yaml

@@ -0,0 +1,19 @@
+apiVersion: v2
+appVersion: latest
+description: Gaps searches through your Plex Server or local folders for all movies, then queries for known movies in the same collection.
+name: gaps
+version: 1.1.1
+keywords:
+  - plex
+  - plex-media-server
+home: https://github.com/k8s-at-home/charts/tree/master/charts/gaps
+icon: https://raw.githubusercontent.com/JasonHHouse/gaps/master/images/Final-Black.png
+sources:
+  - https://github.com/JasonHHouse/gaps
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/gaps/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/gaps/README.md

@@ -0,0 +1,67 @@
+# Gaps
+
+This is a helm chart for [Gaps](https://github.com/JasonHHouse/gaps).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/gaps
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/gaps
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/gaps/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install gaps \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/gaps
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install gaps k8s-at-home/gaps --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/gaps/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/gaps/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/gaps/values.yaml

@@ -0,0 +1,22 @@
+# Default values for Gaps.
+
+image:
+  repository: housewrecker/gaps
+  pullPolicy: IfNotPresent
+  tag: latest
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 8484
+
+env: {}
+  # TZ: UTC
+
+persistence:
+  data:
+    enabled: false
+    emptyDir: false
+    mountPath: /usr/data

charts/gonic/.helmignore

@@ -0,0 +1,24 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
+# OWNERS file for Kubernetes
+OWNERS

charts/gonic/Chart.yaml

@@ -0,0 +1,20 @@
+apiVersion: v2
+appVersion: latest
+description: Music streaming server / subsonic server API implementation
+name: gonic
+version: 1.0.0
+keywords:
+  - music
+  - subsonic
+home: https://github.com/k8s-at-home/charts/tree/master/charts/gonic
+icon: https://raw.githubusercontent.com/sentriz/gonic/master/.github/logo.png
+sources:
+  - https://github.com/sentriz/gonic
+  - https://hub.docker.com/r/sentriz/gonic
+maintainers:
+  - name: billimek
+    email: jeff@billimek.com
+dependencies:
+  - name: common
+    repository: https://k8s-at-home.com/charts/
+    version: 2.2.1

charts/gonic/OWNERS

@@ -0,0 +1,8 @@
+approvers:
+- billimek
+- onedr0p
+- bjw-s
+reviewers:
+- billimek
+- onedr0p
+- bjw-s

charts/gonic/README.md

@@ -0,0 +1,67 @@
+# Gonic
+
+This is a helm chart for [Gonic](https://github.com/sentriz/gonic).
+
+**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/k8s-at-home/charts/issues/new/choose)**
+
+## TL;DR;
+
+```shell
+$ helm repo add k8s-at-home https://k8s-at-home.com/charts/
+$ helm install k8s-at-home/gonic
+```
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+helm install --name my-release k8s-at-home/gonic
+```
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+helm delete my-release --purge
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Configuration
+Read through the charts [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/gonic/values.yaml)
+file. It has several commented out suggested values.
+Additionally you can take a look at the common library [values.yaml](https://github.com/k8s-at-home/charts/blob/master/charts/common/values.yaml) for more (advanced) configuration options.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+```console
+helm install gonic \
+  --set env.TZ="America/New_York" \
+    k8s-at-home/gonic
+```
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the
+chart. For example,
+```console
+helm install gonic k8s-at-home/gonic --values values.yaml 
+```
+
+```yaml
+image:
+  tag: ...
+```
+
+---
+**NOTE**
+
+If you get
+```console
+Error: rendered manifests contain a resource that already exists. Unable to continue with install: existing resource conflict: ...`
+```
+it may be because you uninstalled the chart with `skipuninstall` enabled, you need to manually delete the pvc or use `existingClaim`.
+
+---
+
+## Upgrading an existing Release to a new major version
+
+A major chart version change (like 4.0.1 -> 5.0.0) indicates that there is an incompatible breaking change potentially needing manual actions.

charts/gonic/templates/NOTES.txt

@@ -0,0 +1 @@
+{{- include "common.notes.defaultNotes" . -}}

charts/gonic/templates/common.yaml

@@ -0,0 +1 @@
+{{ include "common.all" . }}

charts/gonic/values.yaml

@@ -0,0 +1,40 @@
+# Default values for Gonic.
+
+image:
+  repository: sentriz/gonic
+  pullPolicy: IfNotPresent
+  tag: latest
+
+strategy:
+  type: Recreate
+
+service:
+  port:
+    port: 80
+
+# # See more environment variables in the gonic documentation
+# https://github.com/sentriz/gonic#configuration-options
+env: {}
+  # TZ: UTC
+
+persistence:
+  data:
+    enabled: false
+    emptyDir: false
+
+  music:
+    enabled: false
+    emptyDir: false
+    mountPath: /music
+    ## Persistent Volume Storage Class
+    ## If defined, storageClassName: <storageClass>
+    ## If set to "-", storageClassName: "", which disables dynamic provisioning
+    ## If undefined (the default) or set to null, no storageClassName spec is
+    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+    ##   GKE, AWS & OpenStack)
+    # storageClass: "-"
+    # accessMode: ReadWriteOnce
+    # size: 1Gi
+    ## Do not delete the pvc upon helm uninstall
+    # skipuninstall: false
+    # existingClaim: ""

charts/grocy/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: v2.7.1
 description: ERP beyond your fridge - grocy is a web-based self-hosted groceries & household management solution for your home
 name: grocy
-version: 4.0.0
+version: 4.3.1
 keywords:
   - grocy
 home: https://github.com/k8s-at-home/charts/tree/master/charts/grocy
@@ -14,5 +14,5 @@ maintainers:
     email: jeff@billimek.com
 dependencies:
   - name: common
-    version: 2.0.3
+    version: 2.2.1
     repository: https://k8s-at-home.com/charts/

charts/heimdall/Chart.yaml

@@ -2,7 +2,7 @@ apiVersion: v2
 appVersion: 2.2.2
 description: An Application dashboard and launcher
 name: heimdall
-version: 4.0.0
+version: 4.2.1
 keywords:
   - heimdall
 home: https://github.com/k8s-at-home/charts/tree/master/charts/heimdall
@@ -15,5 +15,5 @@ maintainers:
     email: jeff@billimek.com
 dependencies:
   - name: common
-    version: 2.0.4
+    version: 2.2.1
     repository: https://k8s-at-home.com/charts/

charts/heimdall/ci/ct-values.yaml

@@ -1,3 +0,0 @@
-probes:
-  startup:
-    enabled: true

charts/heimdall/values.yaml

@@ -1,4 +1,4 @@
-# Default values for grocy.
+# Default values for heimdall.
 
 image:
   repository: linuxserver/heimdall
@@ -17,6 +17,10 @@ env: {}
   # PUID:
   # PGID:
 
+probes:
+  startup:
+    enabled: true
+
 persistence:
   config:
     enabled: false

charts/home-assistant/CHANGELOG.md

@@ -4,6 +4,16 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [5.0.0]
+
+### Changed
+
+- Migrated chart over to our common library, this version introduces breaking changes. Be sure to back up your config volume incase something goes wrong.
+- Upgraded `home-assistant` container image to `2020.12.1`
+- Upgraded `postgresql` subchart from version 10.1.3 to version 10.2.0. 
+- Upgraded `influxdb` subchart from version 1.1.2 to version 1.1.4. 
+- Upgraded `mariadb` subchart from version 9.1.2 to version 9.1.4
+
 ## [4.0.0]
 
 ### Changed
@@ -48,6 +58,8 @@ Any pre-existing StatefulSet will have to be removed before upgrading due to a n
 
 This is the last version before starting this changelog. All sorts of cool stuff was changed, but only `git log` remembers what that was :slightly_frowning_face:
 
+[5.0.0]: https://github.com/k8s-at-home/charts/tree/home-assistant-5.0.0/charts/home-assistant
+
 [4.0.0]: https://github.com/k8s-at-home/charts/tree/home-assistant-4.0.0/charts/home-assistant
 
 [3.1.0]: https://github.com/k8s-at-home/charts/tree/home-assistant-3.1.0/charts/home-assistant

charts/home-assistant/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
-appVersion: 0.118.3
+appVersion: 2021.1.5
 description: Home Assistant
 name: home-assistant
-version: 4.0.0
+version: 5.4.3
 keywords:
 - home-assistant
 - hass
@@ -11,24 +11,24 @@ home: https://github.com/k8s-at-home/charts/tree/master/charts/home-assistant
 icon: https://upload.wikimedia.org/wikipedia/commons/thumb/6/6e/Home_Assistant_Logo.svg/519px-Home_Assistant_Logo.svg.png
 sources:
 - https://github.com/home-assistant/home-assistant
-- https://github.com/danielperna84/hass-configurator
 - https://github.com/cdr/code-server
 - https://github.com/k8s-at-home/charts/tree/master/charts/home-assistant
 maintainers:
 - name: billimek
   email: jeff@billimek.com
-- name: runningman84
-  email: phil@hellmi.de
 dependencies:
+- name: common
+  repository: https://k8s-at-home.com/charts/
+  version: 2.2.1
 - name: postgresql
-  version: 10.1.3
+  version: 10.2.0
   repository: https://charts.bitnami.com/bitnami
   condition: postgresql.enabled
 - name: mariadb
-  version: 9.1.2
+  version: 9.2.0
   repository: https://charts.bitnami.com/bitnami
   condition: mariadb.enabled
 - name: influxdb
-  version: 1.1.2
+  version: 1.1.6
   repository: https://charts.bitnami.com/bitnami
   condition: influxdb.enabled

charts/home-assistant/OWNERS

@@ -1,7 +1,8 @@
 approvers:
 - billimek
-- runningman84
+- onedr0p
+- bjw-s
 reviewers:
 - billimek
-- runningman84
-
+- onedr0p
+- bjw-s